mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-20 22:23:27 +00:00
96010bb17c
These patches allow the driver to access some watchdog registers via a phandle to the system controller node[1]. To apply these changes, we need to add "mediatek,sysctl" to the SoC dtsi. This commit also remove the redundent clocks, interrupts and resets properties. [1] https://lore.kernel.org/all/20230214103936.1061078-2-sergio.paracuellos@gmail.com Tested on Motorola MWR03 (MT7628) Signed-off-by: Shiji Yang <yangshiji66@qq.com>
488 lines
7.9 KiB
Plaintext
488 lines
7.9 KiB
Plaintext
/dts-v1/;
|
|
|
|
/ {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "mediatek,mt7628an-soc";
|
|
|
|
aliases {
|
|
serial0 = &uartlite;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu@0 {
|
|
compatible = "mips,mips24KEc";
|
|
reg = <0>;
|
|
};
|
|
};
|
|
|
|
chosen {
|
|
bootargs = "console=ttyS0,57600";
|
|
};
|
|
|
|
cpuintc: cpuintc {
|
|
#address-cells = <0>;
|
|
#interrupt-cells = <1>;
|
|
interrupt-controller;
|
|
compatible = "mti,cpu-interrupt-controller";
|
|
};
|
|
|
|
palmbus: palmbus@10000000 {
|
|
compatible = "palmbus";
|
|
reg = <0x10000000 0x200000>;
|
|
ranges = <0x0 0x10000000 0x1FFFFF>;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
sysc: syscon@0 {
|
|
compatible = "ralink,mt7628-sysc", "syscon";
|
|
reg = <0x0 0x100>;
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
watchdog: watchdog@100 {
|
|
compatible = "mediatek,mt7621-wdt";
|
|
reg = <0x100 0x100>;
|
|
mediatek,sysctl = <&sysc>;
|
|
};
|
|
|
|
intc: intc@200 {
|
|
compatible = "ralink,mt7628an-intc", "ralink,rt2880-intc";
|
|
reg = <0x200 0x100>;
|
|
|
|
resets = <&sysc 9>;
|
|
reset-names = "intc";
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
|
|
interrupt-parent = <&cpuintc>;
|
|
interrupts = <2>;
|
|
|
|
ralink,intc-registers = <0x9c 0xa0
|
|
0x6c 0xa4
|
|
0x80 0x78>;
|
|
};
|
|
|
|
memc: memc@300 {
|
|
compatible = "ralink,mt7620a-memc", "ralink,rt3050-memc";
|
|
reg = <0x300 0x100>;
|
|
|
|
resets = <&sysc 10>;
|
|
reset-names = "mc";
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <3>;
|
|
};
|
|
|
|
gpio: gpio@600 {
|
|
compatible = "mediatek,mt7621-gpio";
|
|
reg = <0x600 0x100>;
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <6>;
|
|
|
|
#interrupt-cells = <2>;
|
|
interrupt-controller;
|
|
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
|
|
i2c: i2c@900 {
|
|
compatible = "mediatek,mt7621-i2c";
|
|
reg = <0x900 0x100>;
|
|
|
|
clocks = <&sysc 7>;
|
|
clock-names = "i2c";
|
|
|
|
resets = <&sysc 16>;
|
|
reset-names = "i2c";
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
status = "disabled";
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c_pins>;
|
|
};
|
|
|
|
i2s: i2s@a00 {
|
|
compatible = "mediatek,mt7628-i2s";
|
|
reg = <0xa00 0x100>;
|
|
|
|
clocks = <&sysc 8>;
|
|
|
|
resets = <&sysc 17>;
|
|
reset-names = "i2s";
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <10>;
|
|
|
|
txdma-req = <2>;
|
|
rxdma-req = <3>;
|
|
|
|
dmas = <&gdma 4>,
|
|
<&gdma 6>;
|
|
dma-names = "tx", "rx";
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
spi0: spi@b00 {
|
|
compatible = "ralink,mt7621-spi";
|
|
reg = <0xb00 0x100>;
|
|
|
|
clocks = <&sysc 9>;
|
|
clock-names = "spi";
|
|
|
|
resets = <&sysc 18>;
|
|
reset-names = "spi";
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi_pins>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
uartlite: uart0@c00 {
|
|
compatible = "ns16550a";
|
|
reg = <0xc00 0x100>;
|
|
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
no-loopback-test;
|
|
|
|
clocks = <&sysc 11>;
|
|
|
|
resets = <&sysc 12>;
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <20>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart0_pins>;
|
|
};
|
|
|
|
uart1: uart1@d00 {
|
|
compatible = "ns16550a";
|
|
reg = <0xd00 0x100>;
|
|
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
no-loopback-test;
|
|
|
|
clocks = <&sysc 12>;
|
|
|
|
resets = <&sysc 19>;
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <21>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart1_pins>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
uart2: uart2@e00 {
|
|
compatible = "ns16550a";
|
|
reg = <0xe00 0x100>;
|
|
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
no-loopback-test;
|
|
|
|
clocks = <&sysc 13>;
|
|
|
|
resets = <&sysc 20>;
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <22>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart2_pins>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
pwm: pwm@5000 {
|
|
compatible = "mediatek,mt7628-pwm";
|
|
reg = <0x5000 0x1000>;
|
|
#pwm-cells = <2>;
|
|
|
|
resets = <&sysc 31>;
|
|
reset-names = "pwm";
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pwm0_pins>, <&pwm1_pins>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
pcm: pcm@2000 {
|
|
compatible = "ralink,mt7620a-pcm";
|
|
reg = <0x2000 0x800>;
|
|
|
|
resets = <&sysc 11>;
|
|
reset-names = "pcm";
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <4>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
gdma: gdma@2800 {
|
|
compatible = "ralink,rt3883-gdma";
|
|
reg = <0x2800 0x800>;
|
|
|
|
resets = <&sysc 14>;
|
|
reset-names = "dma";
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <7>;
|
|
|
|
#dma-cells = <1>;
|
|
#dma-channels = <16>;
|
|
#dma-requests = <16>;
|
|
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
pinctrl: pinctrl {
|
|
compatible = "ralink,rt2880-pinmux";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&state_default>;
|
|
|
|
state_default: pinctrl0 {
|
|
};
|
|
|
|
spi_pins: spi_pins {
|
|
spi_pins {
|
|
groups = "spi";
|
|
function = "spi";
|
|
};
|
|
};
|
|
|
|
spi_cs1_pins: spi_cs1 {
|
|
spi_cs1 {
|
|
groups = "spi cs1";
|
|
function = "spi cs1";
|
|
};
|
|
};
|
|
|
|
i2c_pins: i2c_pins {
|
|
i2c_pins {
|
|
groups = "i2c";
|
|
function = "i2c";
|
|
};
|
|
};
|
|
|
|
i2s_pins: i2s {
|
|
i2s {
|
|
groups = "i2s";
|
|
function = "i2s";
|
|
};
|
|
};
|
|
|
|
uart0_pins: uartlite {
|
|
uartlite {
|
|
groups = "uart0";
|
|
function = "uart0";
|
|
};
|
|
};
|
|
|
|
uart1_pins: uart1 {
|
|
uart1 {
|
|
groups = "uart1";
|
|
function = "uart1";
|
|
};
|
|
};
|
|
|
|
uart2_pins: uart2 {
|
|
uart2 {
|
|
groups = "uart2";
|
|
function = "uart2";
|
|
};
|
|
};
|
|
|
|
sdxc_pins: sdxc {
|
|
sdxc {
|
|
groups = "sdmode";
|
|
function = "sdxc";
|
|
};
|
|
};
|
|
|
|
pwm0_pins: pwm0 {
|
|
pwm0 {
|
|
groups = "pwm0";
|
|
function = "pwm0";
|
|
};
|
|
};
|
|
|
|
pwm1_pins: pwm1 {
|
|
pwm1 {
|
|
groups = "pwm1";
|
|
function = "pwm1";
|
|
};
|
|
};
|
|
|
|
pcm_i2s_pins: pcm_i2s {
|
|
pcm_i2s {
|
|
groups = "i2s";
|
|
function = "pcm";
|
|
};
|
|
};
|
|
|
|
refclk_pins: refclk {
|
|
refclk {
|
|
groups = "refclk";
|
|
function = "refclk";
|
|
};
|
|
};
|
|
};
|
|
|
|
usbphy: usbphy@10120000 {
|
|
compatible = "mediatek,mt7628-usbphy", "mediatek,mt7620-usbphy";
|
|
reg = <0x10120000 0x1000>;
|
|
#phy-cells = <0>;
|
|
|
|
ralink,sysctl = <&sysc>;
|
|
/* usb phy reset is only controled by RSTCTRL bit 22 */
|
|
resets = <&sysc 22>, <&sysc 25>;
|
|
reset-names = "host", "device";
|
|
};
|
|
|
|
sdhci: sdhci@10130000 {
|
|
compatible = "ralink,mt7620-sdhci";
|
|
reg = <0x10130000 0x4000>;
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <14>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sdxc_pins>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
ehci: ehci@101c0000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "generic-ehci";
|
|
reg = <0x101c0000 0x1000>;
|
|
|
|
phys = <&usbphy>;
|
|
phy-names = "usb";
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <18>;
|
|
|
|
ehci_port1: port@1 {
|
|
reg = <1>;
|
|
#trigger-source-cells = <0>;
|
|
};
|
|
};
|
|
|
|
ohci: ohci@101c1000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "generic-ohci";
|
|
reg = <0x101c1000 0x1000>;
|
|
|
|
phys = <&usbphy>;
|
|
phy-names = "usb";
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <18>;
|
|
|
|
ohci_port1: port@1 {
|
|
reg = <1>;
|
|
#trigger-source-cells = <0>;
|
|
};
|
|
};
|
|
|
|
ethernet: ethernet@10100000 {
|
|
compatible = "ralink,rt5350-eth";
|
|
reg = <0x10100000 0x10000>;
|
|
|
|
interrupt-parent = <&cpuintc>;
|
|
interrupts = <5>;
|
|
|
|
resets = <&sysc 21>;
|
|
reset-names = "fe";
|
|
|
|
mediatek,switch = <&esw>;
|
|
};
|
|
|
|
esw: esw@10110000 {
|
|
compatible = "mediatek,mt7628-esw", "ralink,rt3050-esw";
|
|
reg = <0x10110000 0x8000>;
|
|
|
|
resets = <&sysc 23>, <&sysc 24>;
|
|
reset-names = "esw", "ephy";
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <17>;
|
|
};
|
|
|
|
pcie: pcie@10140000 {
|
|
compatible = "mediatek,mt7620-pci";
|
|
reg = <0x10140000 0x100
|
|
0x10142000 0x100>;
|
|
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
|
|
interrupt-parent = <&cpuintc>;
|
|
interrupts = <4>;
|
|
|
|
resets = <&sysc 26>;
|
|
reset-names = "pcie0";
|
|
|
|
status = "disabled";
|
|
|
|
device_type = "pci";
|
|
|
|
bus-range = <0 255>;
|
|
ranges = <
|
|
0x02000000 0 0x00000000 0x20000000 0 0x10000000 /* pci memory */
|
|
0x01000000 0 0x00000000 0x10160000 0 0x00010000 /* io space */
|
|
>;
|
|
|
|
pcie0: pcie@0,0 {
|
|
reg = <0x0000 0 0 0 0>;
|
|
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
|
|
device_type = "pci";
|
|
|
|
ranges;
|
|
};
|
|
};
|
|
|
|
wmac: wmac@10300000 {
|
|
compatible = "mediatek,mt7628-wmac";
|
|
reg = <0x10300000 0x100000>;
|
|
|
|
clocks = <&sysc 14>;
|
|
|
|
interrupt-parent = <&cpuintc>;
|
|
interrupts = <6>;
|
|
|
|
status = "disabled";
|
|
};
|
|
};
|