openwrt/target/linux/ramips/dts/mt7621_dlink_dir-860l-b1.dts

#include "mt7621.dtsi"

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

/ {
	compatible = "dlink,dir-860l-b1", "mediatek,mt7621-soc";
	model = "D-Link DIR-860L B1";

	aliases {
		label-mac-device = &gmac0;

		led-boot = &led_power_green;
		led-failsafe = &led_power_green;
		led-running = &led_power_green;
		led-upgrade = &led_power_green;
	};

	leds {
		compatible = "gpio-leds";

		power {
			label = "orange:power";
			gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
		};

		led_power_green: power2 {
			label = "green:power";
			gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
		};

		net {
			label = "orange:net";
			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
		};

		net2 {
			label = "green:net";
			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
		};
	};

	keys {
		compatible = "gpio-keys";

		reset {
			label = "reset";
			gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_RESTART>;
		};

		wps {
			label = "wps";
			gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_WPS_BUTTON>;
		};
	};
};

&spi0 {
	status = "okay";

	flash@0 {
		compatible = "jedec,spi-nor";
		reg = <0>;
		spi-max-frequency = <10000000>;

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			partition@0 {
				label = "u-boot";
				reg = <0x0 0x30000>;
				read-only;
			};

			partition@30000 {
				label = "u-boot-env";
				reg = <0x30000 0x4000>;
				read-only;
			};

			radio: partition@34000 {
				compatible = "nvmem-cells";
				label = "radio";
				reg = <0x34000 0x4000>;
				#address-cells = <1>;
				#size-cells = <1>;
				read-only;

				macaddr_radio_4: macaddr@4 {
					reg = <0x4 0x6>;
				};

				eeprom_radio_0: eeprom@0 {
					reg = <0x0 0x200>;
				};

				eeprom_radio_2000: eeprom@2000 {
					reg = <0x2000 0x200>;
				};
			};

			factory: partition@38000 {
				label = "factory";
				reg = <0x38000 0x8000>;
				read-only;
			};

			partition@40000 {
				label = "defaults";
				reg = <0x40000 0x10000>;
				read-only;
			};

			partition@50000 {
				compatible = "seama";
				label = "firmware";
				reg = <0x50000 0xfb0000>;
			};
		};
	};
};

&gmac0 {
	nvmem-cells = <&macaddr_radio_4>;
	nvmem-cell-names = "mac-address";
};

&gmac1 {
	status = "okay";
	label = "wan";
	phy-handle = <&ethphy0>;

	nvmem-cells = <&macaddr_radio_4>;
	nvmem-cell-names = "mac-address";
};

&mdio {
	ethphy0: ethernet-phy@0 {
		reg = <0>;
	};
};

&switch0 {
	ports {
		port@1 {
			status = "okay";
			label = "lan4";
		};

		port@2 {
			status = "okay";
			label = "lan3";
		};

		port@3 {
			status = "okay";
			label = "lan2";
		};

		port@4 {
			status = "okay";
			label = "lan1";
		};
	};
};

&pcie {
	status = "okay";

	reset-gpios = <&gpio 19 GPIO_ACTIVE_LOW>,
		      <&gpio 8 GPIO_ACTIVE_LOW>;
};

&pcie0 {
	wifi0: mt76@0,0 {
		reg = <0x0000 0 0 0 0>;
		nvmem-cells = <&eeprom_radio_2000>;
		nvmem-cell-names = "eeprom";
		ieee80211-freq-limit = <5000000 6000000>;
	};
};

&pcie1 {
	wifi1: mt76@0,0 {
		reg = <0x0000 0 0 0 0>;
		nvmem-cells = <&eeprom_radio_0>;
		nvmem-cell-names = "eeprom";
		ieee80211-freq-limit = <2400000 2500000>;
	};
};

&state_default {
	gpio {
		groups = "uart3", "jtag", "wdt";
		function = "gpio";
	};
};