openwrt/target/linux/ramips/dts/mt7621_beeline_smartbox-pro.dts

// SPDX-License-Identifier: GPL-2.0-or-later

#include "mt7621_sercomm_s1500.dtsi"

/ {
	compatible = "beeline,smartbox-pro", "mediatek,mt7621-soc";
	model = "Beeline SmartBox PRO";

	aliases {
		label-mac-device = &gmac0;
	};

	keys {
		switch_bt {
			label = "ROUT<->REP Switch_bt";
			gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
			linux,input-type = <EV_SW>;
			linux,code = <KEY_RFKILL>;
			debounce-interval = <60>;
		};
	};

	ubi-concat {
		compatible = "mtd-concat";
		devices = <&ubiconcat0 &ubiconcat1 &ubiconcat2 &ubiconcat3 \
			&ubiconcat4 &ubiconcat5 &ubiconcat6>;

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			partition@0 {
				label = "ubi";
				reg = <0x0 0xd2e0000>;
			};
		};
	};
};

&led_wps {
	label = "blue:wps";
	color = <LED_COLOR_ID_BLUE>;
};

&partitions {
	partition@0_all {
		label = "ALL";
		reg = <0x0 0xff80000>;
		read-only;
	};

	partition@200000 {
		label = "sys_data";
		reg = <0x200000 0x1400000>;

		compatible = "fixed-partitions";
		#address-cells = <1>;
		#size-cells = <1>;

		ubiconcat5: partition@0 {
			label = "sys_data_1";
			reg = <0x0 0x600000>;
		};

		/*
		 * Sercomm U-Boot saves the environment at 0x800000 from
		 * the start of the NAND, destroying the "sys_data"
		 * partition. To prevent this, we split "sys_data" into
		 * two parts with "u-boot-env" partition between them.
		 */
		partition@600000 {
			label = "u-boot-env";
			reg = <0x600000 0x20000>;
		};

		ubiconcat6: partition@620000 {
			label = "sys_data_2";
			reg = <0x620000 0xde0000>;
		};
	};

	ubiconcat0: partition@1f00000 {
		label = "RootFS_1";
		reg = <0x1f00000 0x1e00000>;
	};

	partition@3d00000 {
		label = "RootFS_2";
		reg = <0x3d00000 0x1e00000>;
		read-only;
	};

	ubiconcat1: partition@5b00000 {
		label = "JVM/OSGI1";
		reg = <0x5b00000 0x3200000>;
	};

	ubiconcat2: partition@8d00000 {
		label = "JVM/OSGI2";
		reg = <0x8d00000 0x3200000>;
	};

	ubiconcat3: partition@bf00000 {
		label = "OSGI data";
		reg = <0xbf00000 0x3c00000>;
	};

	ubiconcat4: partition@fb00000 {
		label = "Ftool";
		reg = <0xfb00000 0x100000>;
	};

	/*
	 * 4 MiB Reserved for the Bad Blocka
	 * 0x10000000-0xfc00000=0x400000
	 */
};