openwrt/target/linux/ramips/dts/mt7621_asus_rt-ax54.dts
Shiji Yang 6f31941d38 Revert "ramips: convert MT7915 EEPROM to NVMEM format"
Some MT7915 devices need to load the second part of the eeprom to
work properly. The mt76 driver is not yet ready to read the pre-cal
data via the NVMEM cell. Therefore, partially revert commit to fix
the device probe issue on some devices.

P.S.
Except for D-Link and Ubnt devices, It is still uncertain whether
pre-cal data is required for other devices in the patch.

This partially reverts commit 9ac891f8c4.

Fixes: https://github.com/openwrt/openwrt/issues/13700
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
2023-10-17 20:57:07 +08:00

187 lines
3.0 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
/ {
compatible = "asus,rt-ax54", "mediatek,mt7621-soc";
model = "ASUS RT-AX54";
aliases {
led-boot = &led_power;
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
label-mac-device = &gmac0;
};
chosen {
bootargs = "console=ttyS0,115200";
bootargs-override = "console=ttyS0,115200";
};
leds {
compatible = "gpio-leds";
led_power: power {
label = "blue:power";
color = <LED_COLOR_ID_BLUE>;
function = LED_FUNCTION_POWER;
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
};
keys {
compatible = "gpio-keys";
key-restart {
label = "reset";
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
key-wps {
label = "wps";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
};
&nand {
status = "okay";
mediatek,nmbm;
mediatek,bmt-max-ratio = <1>;
mediatek,bmt-max-reserved-blocks = <64>;
mediatek,bmt-remap-range = <0x000000 0x7e0000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x80000>;
read-only;
};
/*
* u-boot gets split here while keeping u-boot read-only,
* which allows safe usage of fw_setenv
*/
partition@80000 {
label = "u-boot-env";
reg = <0x80000 0x60000>;
};
partition@e0000 {
label = "nvram";
reg = <0xe0000 0x100000>;
read-only;
};
factory: partition@1e0000 {
label = "factory";
reg = <0x1e0000 0x100000>;
read-only;
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
macaddr_factory_4: macaddr@4 {
reg = <0x4 0x6>;
};
};
factory2: partition@2e0000 {
label = "factory2";
reg = <0x2e0000 0x100000>;
read-only;
};
partition@3e0000 {
label = "kernel";
reg = <0x3e0000 0x400000>;
};
partition@7e0000 {
label = "ubi";
reg = <0x7e0000 0x7020000>;
};
/* Last 8M are reserved for NMBM management (bad blocks) */
};
};
&pcie {
status = "okay";
};
&pcie1 {
wifi@0,0 {
compatible = "mediatek,mt76";
reg = <0x0000 0 0 0 0>;
mediatek,mtd-eeprom = <&factory 0x0000>;
mediatek,disable-radar-background;
};
};
&gmac0 {
nvmem-cells = <&macaddr_factory_4>;
nvmem-cell-names = "mac-address";
};
&gmac1 {
status = "okay";
label = "wan";
phy-handle = <&ethphy4>;
nvmem-cells = <&macaddr_factory_4>;
nvmem-cell-names = "mac-address";
};
&mdio {
ethphy4: ethernet-phy@4 {
reg = <4>;
};
};
&switch0 {
ports {
port@0 {
status = "okay";
label = "lan4";
};
port@1 {
status = "okay";
label = "lan3";
};
port@2 {
status = "okay";
label = "lan2";
};
port@3 {
status = "okay";
label = "lan1";
};
};
};
&state_default {
gpio {
groups = "i2c", "uart2", "uart3", "jtag", "wdt";
function = "gpio";
};
};