openwrt/target/linux/bmips/dts/bcm63167-sercomm-h500-s.dtsi
Álvaro Fernández Rojas 130e5c63c7 bmips: dts: improve and align device tree files
Align all the device tree files and follow the same criteria before more
devices are ported from bcm63xx and this goes out of control.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2023-06-11 10:14:25 +02:00

297 lines
4.0 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later
#include "bcm63268.dtsi"
/ {
aliases {
led-boot = &led_power_green;
led-failsafe = &led_power_red;
led-running = &led_power_green;
led-upgrade = &led_power_green;
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <100>;
wps {
label = "wps";
gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
debounce-interval = <60>;
};
reset {
label = "reset";
gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
debounce-interval = <60>;
};
};
};
&ehci {
status = "okay";
};
&ethernet {
status = "okay";
nvmem-cells = <&macaddr_cferom_6a0>;
nvmem-cell-names = "mac-address";
};
&leds {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_leds>;
led@0 {
reg = <0>;
label = "red:mobile";
};
led@1 {
reg = <1>;
label = "green:mobile";
};
led_power_red: led@8 {
reg = <8>;
label = "red:power";
panic-indicator;
};
led@9 {
reg = <9>;
label = "green:wifi";
};
led@12 {
reg = <12>;
label = "red:phone";
};
led@13 {
reg = <13>;
label = "red:wifi";
};
led@14 {
reg = <14>;
label = "red:internet";
};
led@15 {
reg = <15>;
label = "green:internet";
};
led@16 {
reg = <16>;
label = "green:phone";
};
led_power_green: led@17 {
reg = <17>;
label = "green:power";
};
led@23 {
reg = <23>;
label = "blue:mobile";
};
};
&mdio_int {
phy12: ethernet-phy@c {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <12>;
};
};
&mdio_ext {
switch@1e {
compatible = "brcm,bcm53134";
reg = <30>;
dsa,member = <1 0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@1 {
reg = <1>;
label = "lan3";
};
port@2 {
reg = <2>;
label = "lan2";
};
port@3 {
reg = <3>;
label = "lan1";
};
port@5 {
reg = <5>;
label = "wifi";
phy-mode = "rgmii";
fixed-link {
speed = <1000>;
full-duplex;
};
};
port@8 {
reg = <8>;
phy-mode = "rgmii-txid";
ethernet = <&switch0port4>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
};
};
&nflash {
status = "okay";
nandcs@0 {
compatible = "brcm,nandcs";
reg = <0>;
nand-ecc-step-size = <512>;
nand-ecc-strength = <4>;
nand-on-flash-bbt;
brcm,nand-oob-sector-size = <64>;
#address-cells = <1>;
#size-cells = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
cferom: partition@0 {
label = "cferom";
reg = <0x0000000 0x0020000>;
read-only;
};
partition@20000 {
label = "part_map";
reg = <0x0020000 0x00a0000>;
read-only;
};
partition@c0000 {
label = "cferam1";
reg = <0x00c0000 0x0140000>;
read-only;
};
partition@200000 {
label = "cferam2";
reg = <0x0200000 0x0140000>;
read-only;
};
partition@6920000 {
label = "bootflag1";
reg = <0x6920000 0x0140000>;
};
partition@6a60000 {
label = "bootflag2";
reg = <0x6a60000 0x0140000>;
};
partition@520000 {
compatible = "sercomm,wfi";
label = "wfi";
reg = <0x0520000 0x6400000>;
};
partition@6ba0000 {
label = "xml_cfg";
reg = <0x6ba0000 0x0280000>;
read-only;
};
partition@6e20000 {
label = "app_data";
reg = <0x6e20000 0x0280000>;
read-only;
};
};
};
};
&ohci {
status = "okay";
};
&switch0 {
dsa,member = <0 0>;
ports {
port@3 {
reg = <3>;
label = "wan";
phy-handle = <&phy12>;
phy-mode = "gmii";
};
switch0port4: port@4 {
reg = <4>;
label = "extsw";
phy-mode = "rgmii-txid";
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
};
&pinctrl {
pinctrl_leds: leds {
function = "led";
pins = "gpio0", "gpio1", "gpio8", "gpio9",
"gpio12", "gpio13", "gpio14", "gpio15",
"gpio16", "gpio17", "gpio23";
};
};
&uart0 {
status = "okay";
};
&usbh {
status = "okay";
};
&cferom {
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
macaddr_cferom_6a0: macaddr@6a0 {
reg = <0x6a0 0x6>;
};
};