ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2025-01-08 22:12:49 +00:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity
7ff95775a2
openwrt/target/linux/mediatek/image/filogic.mk
Mikhail Zhilkin 7ff95775a2 mediatek: add support for Mercusys MR90X v1 
This commit adds support for Mercusys MR90X(EU) v1 router.

Device specification
--------------------
SoC Type:   MediaTek MT7986BLA, Cortex-A53, 64-bit
RAM:        MediaTek MT7986BLA (512MB)
Flash:      SPI NAND GigaDevice GD5F1GQ5UEYIGY (128 MB)
Ethernet:   MediaTek MT7531AE + 2.5GbE MaxLinear GPY211C0VC (SLNW8)
Ethernet:   1x2.5Gbe (WAN/LAN 2.5Gbps), 3xGbE (WAN/LAN 1Gbps, LAN1, LAN2)
WLAN 2g:    MediaTek MT7975N, b/g/n/ax, MIMO 4x4
WLAN 5g:    MediaTek MT7975P(N), a/n/ac/ax, MIMO 4x4
LEDs:       1 orange and 1 green status LEDs, 4 green gpio-controlled
            LEDs on ethernet ports
Button:     1 (Reset)
USB ports:  No
Power:      12 VDC, 2 A
Connector:  Barrel
Bootloader: Main U-Boot - U-Boot 2022.01-rc4. Additionally, both UBI
            slots contain "seconduboot" (also U-Boot 2022.01-rc4)

Serial console (UART)
---------------------
                            V
+-------+-------+-------+-------+
| +3.3V |  GND  |  TX   |  RX   |
+---+---+-------+-------+-------+
    |
    +--- Don't connect

The R3 (TX line) and R6 (RX line) are absent on the PCB. You should
solder them or solder the jumpers.

Installation (UART)
-------------------
1. Place OpenWrt initramfs image on tftp server with IP 192.168.1.2
2. Attach UART, switch on the router and interrupt the boot process by
   pressing 'Ctrl-C'
3. Load and run OpenWrt initramfs image:
      tftpboot initramfs-kernel.bin
      bootm
4. Once inside OpenWrt, set / update env variables:
      fw_setenv baudrate 115200
      fw_setenv bootargs "ubi.mtd=ubi0 console=ttyS0,115200n1 loglevel=8 earlycon=uart8250,mmio32,0x11002000 init=/etc/preinit"
      fw_setenv fdtcontroladdr 5ffc0e70
      fw_setenv ipaddr 192.168.1.1
      fw_setenv loadaddr 0x46000000
      fw_setenv mtdids "spi-nand0=spi-nand0"
      fw_setenv mtdparts "spi-nand0:2M(boot),1M(u-boot-env),50M(ubi0),50M(ubi1),8M(userconfig),4M(tp_data)"
      fw_setenv netmask 255.255.255.0
      fw_setenv serverip 192.168.1.2
      fw_setenv stderr serial@11002000
      fw_setenv stdin serial@11002000
      fw_setenv stdout serial@11002000
      fw_setenv tp_boot_idx 0
5. Run 'sysupgrade -n' with the sysupgrade OpenWrt image

Installation (without UART)
---------------------------
1.  Login as root via SSH (router IP, port 20001, password - your web
    interface password)
2.  Open for editing /etc/hotplug.d/iface/65-iptv (e.g., using WinSCP and
    SSH settings from the p.1)
3.  Add a newline after "#!/bin/sh":
       telnetd -l /bin/login.sh
4.  Save "65-iptv" file
5.  Toggle "IPTV/VLAN Enable" checkbox in the router web interface and
    save
6.  Make sure that telnetd is running:
       netstat -ltunp | grep 23
7.  Login via telnet to router IP, port 23 (no username and password are
    required)
8  Upload OpenWrt "initramfs-kernel.bin" to the "/tmp" folder of the
    router (e.g., using WinSCP and SSH settings from the p.1)
9.  Stock busybox doesn't contain ubiupdatevol command. Hence, we need to
    download and upload the full version of busybox to the router. For
    example, from here:
    https://github.com/xerta555/Busybox-Binaries/raw/master/busybox-arm64
    Upload busybox-arm64 to the /tmp dir of the router and run:
    in the telnet shell:
       cd /tmp
       chmod a+x busybox-arm64
10. Check "initramfs-kernel.bin" size:
       du -h initramfs-kernel.bin
11. Delete old and create new "kernel" volume with appropriate size
    (greater than "initramfs-kernel.bin" size):
       ubirmvol /dev/ubi0 -N kernel
       ubimkvol /dev/ubi0 -n 1 -N kernel -s 9MiB
12. Write OpenWrt "initramfs-kernel.bin" to the flash:
       ./busybox-arm64 ubiupdatevol /dev/ubi0_1 /tmp/initramfs-kernel.bin
13. u-boot-env can be empty so lets create it (or overwrite it if it
    already exists) with the necessary values:
       fw_setenv baudrate 115200
       fw_setenv bootargs "ubi.mtd=ubi0 console=ttyS0,115200n1 loglevel=8 earlycon=uart8250,mmio32,0x11002000 init=/etc/preinit"
       fw_setenv fdtcontroladdr 5ffc0e70
       fw_setenv ipaddr 192.168.1.1
       fw_setenv loadaddr 0x46000000
       fw_setenv mtdids "spi-nand0=spi-nand0"
       fw_setenv mtdparts "spi-nand0:2M(boot),1M(u-boot-env),50M(ubi0),50M(ubi1),8M(userconfig),4M(tp_data)"
       fw_setenv netmask 255.255.255.0
       fw_setenv serverip 192.168.1.2
       fw_setenv stderr serial@11002000
       fw_setenv stdin serial@11002000
       fw_setenv stdout serial@11002000
       fw_setenv tp_boot_idx 0
14. Reboot to OpenWrt initramfs:
       reboot
15. Login as root via SSH (IP 192.168.1.1, port 22)
16. Upload OpenWrt sysupgrade.bin image to the /tmp dir of the router
17. Run sysupgrade:
       sysupgrade -n /tmp/sysupgrade.bin

Recovery
--------
1. Press Reset button and power on the router
2. Navigate to U-Boot recovery web server (http://192.168.1.1/) and
   upload the OEM firmware

Recovery (UART)
---------------
1. Place OpenWrt initramfs image on tftp server with IP 192.168.1.2
2. Attach UART, switch on the router and interrupt the boot process by
   pressing 'Ctrl-C'
3. Load and run OpenWrt initramfs image:
      tftpboot initramfs-kernel.bin
      bootm
4. Do what you need (restore partitions from a backup, install OpenWrt
   etc.)

Stock layout
------------
0x000000000000-0x000000200000 : "boot"
0x000000200000-0x000000300000 : "u-boot-env"
0x000000300000-0x000003500000 : "ubi0"
0x000003500000-0x000006700000 : "ubi1"
0x000006700000-0x000006f00000 : "userconfig"
0x000006f00000-0x000007300000 : "tp_data"

ubi0/ubi1 format
----------------
U-Boot at boot checks that all volumes are in place:
+-------------------------------+
| Volume Name: uboot   Vol ID: 0|
| Volume Name: kernel  Vol ID: 1|
| Volume Name: rootfs  Vol ID: 2|
+-------------------------------+

MAC addresses
-------------
+---------+-------------------+-----------+
|         | MAC               | Algorithm |
+---------+-------------------+-----------+
| label   | 00:eb:xx:xx:xx:be | label     |
| LAN     | 00:eb:xx:xx:xx:be | label     |
| WAN     | 00:eb:xx:xx:xx:bf | label+1   |
| WLAN 2g | 00:eb:xx:xx:xx:be | label     |
| WLAN 5g | 00:eb:xx:xx:xx:bd | label-1   |
+---------+-------------------+-----------+
label MAC address was found in UBI partition "tp_data", file
"default-mac". OEM wireless eeprom is also there (file
"MT7986_EEPROM.bin").

Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
(cherry picked from commit e4fe3097ef)
[Fix merging conflict]
Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
2023-07-01 15:16:17 +00:00

401 lines
14 KiB
Makefile
Raw Blame History

DTS_DIR := $(DTS_DIR)/mediatek
define Image/Prepare
# For UBI we want only one extra block
rm -f $(KDIR)/ubi_mark
echo -ne '\xde\xad\xc0\xde' > $(KDIR)/ubi_mark
endef
define Build/mt7981-bl2
cat $(STAGING_DIR_IMAGE)/mt7981-$1-bl2.img >> $@
endef
define Build/mt7981-bl31-uboot
cat $(STAGING_DIR_IMAGE)/mt7981_$1-u-boot.fip >> $@
endef
define Build/mt7986-bl2
cat $(STAGING_DIR_IMAGE)/mt7986-$1-bl2.img >> $@
endef
define Build/mt7986-bl31-uboot
cat $(STAGING_DIR_IMAGE)/mt7986_$1-u-boot.fip >> $@
endef
define Build/mt7986-gpt
cp $@ $@.tmp 2>/dev/null || true
ptgen -g -o $@.tmp -a 1 -l 1024 \
$(if $(findstring sdmmc,$1), \
-H \
-t 0x83 -N bl2 -r -p 4079k@17k \
) \
-t 0x83 -N ubootenv -r -p 512k@4M \
-t 0x83 -N factory -r -p 2M@4608k \
-t 0xef -N fip -r -p 4M@6656k \
-N recovery -r -p 32M@12M \
$(if $(findstring sdmmc,$1), \
-N install -r -p 20M@44M \
-t 0x2e -N production -p $(CONFIG_TARGET_ROOTFS_PARTSIZE)M@64M \
) \
$(if $(findstring emmc,$1), \
-t 0x2e -N production -p $(CONFIG_TARGET_ROOTFS_PARTSIZE)M@64M \
)
cat $@.tmp >> $@
rm $@.tmp
endef
metadata_gl_json = \
'{ $(if $(IMAGE_METADATA),$(IMAGE_METADATA)$(comma)) \
"metadata_version": "1.1", \
"compat_version": "$(call json_quote,$(compat_version))", \
$(if $(DEVICE_COMPAT_MESSAGE),"compat_message": "$(call json_quote,$(DEVICE_COMPAT_MESSAGE))"$(comma)) \
$(if $(filter-out 1.0,$(compat_version)),"new_supported_devices": \
[$(call metadata_devices,$(SUPPORTED_DEVICES))]$(comma) \
"supported_devices": ["$(call json_quote,$(legacy_supported_message))"]$(comma)) \
$(if $(filter 1.0,$(compat_version)),"supported_devices":[$(call metadata_devices,$(SUPPORTED_DEVICES))]$(comma)) \
"version": { \
"release": "$(call json_quote,$(VERSION_NUMBER))", \
"date": "$(shell TZ='Asia/Chongqing' date '+%Y%m%d%H%M%S')", \
"dist": "$(call json_quote,$(VERSION_DIST))", \
"version": "$(call json_quote,$(VERSION_NUMBER))", \
"revision": "$(call json_quote,$(REVISION))", \
"target": "$(call json_quote,$(TARGETID))", \
"board": "$(call json_quote,$(if $(BOARD_NAME),$(BOARD_NAME),$(DEVICE_NAME)))" \
} \
}'
define Build/append-gl-metadata
$(if $(SUPPORTED_DEVICES),-echo $(call metadata_gl_json,$(SUPPORTED_DEVICES)) | fwtool -I - $@)
sha256sum "$@" | cut -d" " -f1 > "$@.sha256sum"
[ ! -s "$(BUILD_KEY)" -o ! -s "$(BUILD_KEY).ucert" -o ! -s "$@" ] || { \
cp "$(BUILD_KEY).ucert" "$@.ucert" ;\
usign -S -m "$@" -s "$(BUILD_KEY)" -x "$@.sig" ;\
ucert -A -c "$@.ucert" -x "$@.sig" ;\
fwtool -S "$@.ucert" "$@" ;\
}
endef
define Device/asus_tuf-ax4200
DEVICE_VENDOR := ASUS
DEVICE_MODEL := TUF-AX4200
DEVICE_DTS := mt7986a-asus-tuf-ax4200
DEVICE_DTS_DIR := ../dts
DEVICE_DTS_LOADADDR := 0x47000000
DEVICE_PACKAGES := kmod-usb3 kmod-mt7986-firmware mt7986-wo-firmware
IMAGES := sysupgrade.bin
KERNEL := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += asus_tuf-ax4200
define Device/bananapi_bpi-r3
DEVICE_VENDOR := Bananapi
DEVICE_MODEL := BPi-R3
DEVICE_DTS := mt7986a-bananapi-bpi-r3
DEVICE_DTS_CONFIG := config-mt7986a-bananapi-bpi-r3
DEVICE_DTS_OVERLAY:= mt7986a-bananapi-bpi-r3-emmc mt7986a-bananapi-bpi-r3-nand mt7986a-bananapi-bpi-r3-nor mt7986a-bananapi-bpi-r3-sd
DEVICE_DTS_DIR := $(DTS_DIR)/
DEVICE_PACKAGES := kmod-hwmon-pwmfan kmod-i2c-gpio kmod-mt7986-firmware kmod-sfp kmod-usb3 e2fsprogs f2fsck mkf2fs mt7986-wo-firmware
IMAGES := sysupgrade.itb
KERNEL_LOADADDR := 0x44000000
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
ARTIFACTS := \
emmc-preloader.bin emmc-bl31-uboot.fip \
nor-preloader.bin nor-bl31-uboot.fip \
sdcard.img.gz \
snand-preloader.bin snand-bl31-uboot.fip
ARTIFACT/emmc-preloader.bin := mt7986-bl2 emmc-ddr4
ARTIFACT/emmc-bl31-uboot.fip := mt7986-bl31-uboot bananapi_bpi-r3-emmc
ARTIFACT/nor-preloader.bin := mt7986-bl2 nor-ddr4
ARTIFACT/nor-bl31-uboot.fip := mt7986-bl31-uboot bananapi_bpi-r3-nor
ARTIFACT/snand-preloader.bin := mt7986-bl2 spim-nand-ddr4
ARTIFACT/snand-bl31-uboot.fip := mt7986-bl31-uboot bananapi_bpi-r3-snand
ARTIFACT/sdcard.img.gz := mt7986-gpt sdmmc |\
pad-to 17k | mt7986-bl2 sdmmc-ddr4 |\
pad-to 6656k | mt7986-bl31-uboot bananapi_bpi-r3-sdmmc |\
$(if $(CONFIG_TARGET_ROOTFS_INITRAMFS),\
pad-to 12M | append-image-stage initramfs-recovery.itb | check-size 44m |\
) \
pad-to 44M | mt7986-bl2 spim-nand-ddr4 |\
pad-to 45M | mt7986-bl31-uboot bananapi_bpi-r3-snand |\
pad-to 49M | mt7986-bl2 nor-ddr4 |\
pad-to 50M | mt7986-bl31-uboot bananapi_bpi-r3-nor |\
pad-to 51M | mt7986-bl2 emmc-ddr4 |\
pad-to 52M | mt7986-bl31-uboot bananapi_bpi-r3-emmc |\
pad-to 56M | mt7986-gpt emmc |\
$(if $(CONFIG_TARGET_ROOTFS_SQUASHFS),\
pad-to 64M | append-image squashfs-sysupgrade.itb | check-size |\
) \
gzip
IMAGE_SIZE := $$(shell expr 64 + $$(CONFIG_TARGET_ROOTFS_PARTSIZE))m
KERNEL := kernel-bin | gzip
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.itb := append-kernel | fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | pad-rootfs | append-metadata
DEVICE_DTC_FLAGS := --pad 4096
DEVICE_COMPAT_VERSION := 1.1
DEVICE_COMPAT_MESSAGE := Device tree overlay mechanism needs bootloader update
endef
TARGET_DEVICES += bananapi_bpi-r3
define Device/cudy_wr3000-v1
DEVICE_VENDOR := Cudy
DEVICE_MODEL := WR3000
DEVICE_VARIANT := v1
DEVICE_DTS := mt7981b-cudy-wr3000-v1
DEVICE_DTS_DIR := ../dts
DEVICE_DTS_LOADADDR := 0x47000000
IMAGES := sysupgrade.bin
IMAGE_SIZE := 15424k
SUPPORTED_DEVICES += R31
KERNEL := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.bin := append-kernel | pad-to 128k | append-rootfs | pad-rootfs | check-size | append-metadata
DEVICE_PACKAGES := kmod-mt7981-firmware
endef
TARGET_DEVICES += cudy_wr3000-v1
define Device/glinet_gl-mt3000
DEVICE_VENDOR := GL.iNet
DEVICE_MODEL := GL-MT3000
DEVICE_DTS := mt7981b-glinet-gl-mt3000
DEVICE_DTS_DIR := ../dts
SUPPORTED_DEVICES += glinet,mt3000-snand
DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware kmod-hwmon-pwmfan kmod-usb3
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE_SIZE := 246272k
KERNEL_IN_UBI := 1
IMAGE/sysupgrade.bin := sysupgrade-tar | append-gl-metadata
endef
TARGET_DEVICES += glinet_gl-mt3000
define Device/netgear_wax220
DEVICE_VENDOR := Netgear
DEVICE_MODEL := WAX220
DEVICE_DTS := mt7986b-netgear-wax220
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-mt7986-firmware mt7986-wo-firmware
IMAGES := sysupgrade.bin
KERNEL_IN_UBI := 1
KERNEL := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += netgear_wax220
define Device/mediatek_mt7986a-rfb-nand
DEVICE_VENDOR := MediaTek
DEVICE_MODEL := MT7986 rfba AP (NAND)
DEVICE_DTS := mt7986a-rfb-spim-nand
DEVICE_DTS_DIR := $(DTS_DIR)/
DEVICE_PACKAGES := kmod-mt7986-firmware mt7986-wo-firmware
SUPPORTED_DEVICES := mediatek,mt7986a-rfb-snand
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE_SIZE := 65536k
KERNEL_IN_UBI := 1
IMAGES += factory.bin
IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
KERNEL = kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
KERNEL_INITRAMFS = kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd
endef
TARGET_DEVICES += mediatek_mt7986a-rfb-nand
define Device/mediatek_mt7986b-rfb
DEVICE_VENDOR := MediaTek
DEVICE_MODEL := MTK7986 rfbb AP
DEVICE_DTS := mt7986b-rfb
DEVICE_DTS_DIR := $(DTS_DIR)/
DEVICE_PACKAGES := kmod-mt7986-firmware mt7986-wo-firmware
SUPPORTED_DEVICES := mediatek,mt7986b-rfb
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE_SIZE := 65536k
KERNEL_IN_UBI := 1
IMAGES += factory.bin
IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += mediatek_mt7986b-rfb
define Device/mediatek_mt7988a-rfb-nand
DEVICE_VENDOR := MediaTek
DEVICE_MODEL := MT7988a nand rfb
DEVICE_DTS := mt7988a-dsa-10g-spim-nand
DEVICE_DTS_DIR := $(DTS_DIR)/
KERNEL_LOADADDR := 0x48000000
SUPPORTED_DEVICES := mediatek,mt7988a-rfb
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE_SIZE := 65536k
KERNEL_IN_UBI := 1
IMAGES += factory.bin
IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += mediatek_mt7988a-rfb-nand
define Device/mercusys_mr90x-v1
DEVICE_VENDOR := Mercusys
DEVICE_MODEL := MR90X v1
DEVICE_DTS := mt7986b-mercusys-mr90x-v1
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-mt7986-firmware mt7986-wo-firmware
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE_SIZE := 51200k
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += mercusys_mr90x-v1
define Device/qihoo_360t7
DEVICE_VENDOR := Qihoo
DEVICE_MODEL := 360T7
DEVICE_DTS := mt7981b-qihoo-360t7
DEVICE_DTS_DIR := ../dts
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
KERNEL_IN_UBI := 1
UBOOTENV_IN_UBI := 1
IMAGES := sysupgrade.itb
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
KERNEL := kernel-bin | gzip
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.itb := append-kernel | \
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware
ARTIFACTS := preloader.bin bl31-uboot.fip
ARTIFACT/preloader.bin := mt7981-bl2 spim-nand-ddr3
ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot qihoo_360t7
endef
TARGET_DEVICES += qihoo_360t7
define Device/tplink_tl-xdr-common
DEVICE_VENDOR := TP-Link
DEVICE_DTS_DIR := ../dts
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
KERNEL_IN_UBI := 1
UBOOTENV_IN_UBI := 1
IMAGES := sysupgrade.itb
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
KERNEL := kernel-bin | gzip
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.itb := append-kernel | \
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
DEVICE_PACKAGES := kmod-usb3 kmod-mt7986-firmware mt7986-wo-firmware
ARTIFACTS := preloader.bin bl31-uboot.fip
ARTIFACT/preloader.bin := mt7986-bl2 spim-nand-ddr3
endef
define Device/tplink_tl-xdr4288
DEVICE_MODEL := TL-XDR4288
DEVICE_DTS := mt7986a-tplink-tl-xdr4288
ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot tplink_tl-xdr4288
$(call Device/tplink_tl-xdr-common)
endef
TARGET_DEVICES += tplink_tl-xdr4288
define Device/tplink_tl-xdr6086
DEVICE_MODEL := TL-XDR6086
DEVICE_DTS := mt7986a-tplink-tl-xdr6086
ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot tplink_tl-xdr6086
$(call Device/tplink_tl-xdr-common)
endef
TARGET_DEVICES += tplink_tl-xdr6086
define Device/tplink_tl-xdr6088
DEVICE_MODEL := TL-XDR6088
DEVICE_DTS := mt7986a-tplink-tl-xdr6088
ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot tplink_tl-xdr6088
$(call Device/tplink_tl-xdr-common)
endef
TARGET_DEVICES += tplink_tl-xdr6088
define Device/xiaomi_redmi-router-ax6000-stock
DEVICE_VENDOR := Xiaomi
DEVICE_MODEL := Redmi Router AX6000 (stock layout)
DEVICE_DTS := mt7986a-xiaomi-redmi-router-ax6000-stock
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-leds-ws2812b kmod-mt7986-firmware mt7986-wo-firmware
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
ARTIFACTS := initramfs-factory.ubi
ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-kernel.bin | ubinize-kernel
endif
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += xiaomi_redmi-router-ax6000-stock
define Device/xiaomi_redmi-router-ax6000-ubootmod
DEVICE_VENDOR := Xiaomi
DEVICE_MODEL := Redmi Router AX6000 (OpenWrt U-Boot layout)
DEVICE_DTS := mt7986a-xiaomi-redmi-router-ax6000-ubootmod
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-leds-ws2812b kmod-mt7986-firmware mt7986-wo-firmware
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
IMAGES := sysupgrade.itb
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
KERNEL_IN_UBI := 1
UBOOTENV_IN_UBI := 1
KERNEL := kernel-bin | gzip
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.itb := append-kernel | \
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
ARTIFACTS := preloader.bin bl31-uboot.fip
ARTIFACT/preloader.bin := mt7986-bl2 spim-nand-ddr4
ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot xiaomi_redmi-router-ax6000
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
ARTIFACTS += initramfs-factory.ubi
ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-recovery.itb | ubinize-kernel
endif
endef
TARGET_DEVICES += xiaomi_redmi-router-ax6000-ubootmod
define Device/zyxel_ex5601-t0-stock
DEVICE_VENDOR := Zyxel
DEVICE_MODEL := EX5601-T0 (stock layout)
DEVICE_DTS := mt7986a-zyxel-ex5601-t0-stock
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-mt7986-firmware mt7986-wo-firmware
SUPPORTED_DEVICES := mediatek,mt7986a-rfb-snand
UBINIZE_OPTS := -E 5
BLOCKSIZE := 256k
PAGESIZE := 4096
IMAGE_SIZE := 65536k
KERNEL_IN_UBI := 1
IMAGES += factory.bin
IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
KERNEL = kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
KERNEL_INITRAMFS = kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd
endef
TARGET_DEVICES += zyxel_ex5601-t0-stock
Reference in New Issue View Git Blame Copy Permalink