mirror of
https://github.com/openwrt/openwrt.git
synced 2025-04-04 18:09:26 +00:00
7f78a86254
The wpa_supplicant code for IBSS allows to set the mcast rate. It is recommended to increase this value from 1 or 6 Mbit/s to something higher when using a mesh protocol on top which uses the multicast packet loss as indicator for the link quality. This setting was unfortunately not applied for mesh mode. But it would be beneficial when wpa_supplicant would behave similar to IBSS mode and set this argument during mesh join like authsae already does. At least it is helpful for companies/projects which are currently switching to 802.11s (without mesh_fwding and with mesh_ttl set to 1) as replacement for IBSS because newer drivers seem to support 802.11s but not IBSS anymore. Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com> Tested-by: Simon Wunderlich <simon.wunderlich@openmesh.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> [refresh] (cherry picked from commit 43f66943d0dbf0ed0ec2a9cb071d0fbded2fbe35)
This is the buildsystem for the LEDE Linux distribution. Please use "make menuconfig" to choose your preferred configuration for the toolchain and firmware. You need to have installed gcc, binutils, bzip2, flex, python, perl, make, find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers. Run "./scripts/feeds update -a" to get all the latest package definitions defined in feeds.conf / feeds.conf.default respectively and "./scripts/feeds install -a" to install symlinks of all of them into package/feeds/. Use "make menuconfig" to configure your image. Simply running "make" will build your firmware. It will download all sources, build the cross-compile toolchain, the kernel and all choosen applications. To build your own firmware you need to have access to a Linux, BSD or MacOSX system (case-sensitive filesystem required). Cygwin will not be supported because of the lack of case sensitiveness in the file system. Sunshine! Your LEDE Community http://www.lede-project.org