mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-20 14:13:16 +00:00
7f04d67517
These PCI drivers are a bit hacky and definitely not suitable for upstreaming, but hopefully we can use them as a base for developing proper upstream PCI drivers. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
350 lines
6.6 KiB
Plaintext
350 lines
6.6 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
|
|
/dts-v1/;
|
|
|
|
#include <dt-bindings/clock/bcm6358-clock.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/interrupt-controller/bcm6358-interrupt-controller.h>
|
|
#include <dt-bindings/reset/bcm6358-reset.h>
|
|
|
|
/ {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "brcm,bcm6358";
|
|
|
|
aliases {
|
|
pflash = &pflash;
|
|
pinctrl = &pinctrl;
|
|
serial0 = &uart0;
|
|
serial1 = &uart1;
|
|
spi0 = &lsspi;
|
|
};
|
|
|
|
chosen {
|
|
bootargs = "earlycon";
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
clocks {
|
|
periph_osc: periph-osc {
|
|
compatible = "fixed-clock";
|
|
|
|
#clock-cells = <0>;
|
|
|
|
clock-frequency = <50000000>;
|
|
clock-output-names = "periph";
|
|
};
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
mips-hpt-frequency = <150000000>;
|
|
|
|
cpu@0 {
|
|
compatible = "brcm,bmips4350", "mips,mips4Kc";
|
|
device_type = "cpu";
|
|
reg = <0>;
|
|
};
|
|
|
|
cpu@1 {
|
|
compatible = "brcm,bmips4350", "mips,mips4Kc";
|
|
device_type = "cpu";
|
|
reg = <1>;
|
|
};
|
|
};
|
|
|
|
cpu_intc: interrupt-controller {
|
|
#address-cells = <0>;
|
|
compatible = "mti,cpu-interrupt-controller";
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
};
|
|
|
|
memory@0 {
|
|
device_type = "memory";
|
|
reg = <0 0>;
|
|
};
|
|
|
|
pflash: nor@1e000000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "cfi-flash";
|
|
reg = <0x1e000000 0x2000000>;
|
|
bank-width = <2>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
ubus {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
compatible = "simple-bus";
|
|
ranges;
|
|
|
|
periph_clk: clock-controller@fffe0004 {
|
|
compatible = "brcm,bcm6358-clocks";
|
|
reg = <0xfffe0004 0x4>;
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
pll_cntl: syscon@fffe0008 {
|
|
compatible = "syscon", "simple-mfd";
|
|
reg = <0xfffe0008 0x4>;
|
|
native-endian;
|
|
|
|
syscon-reboot {
|
|
compatible = "syscon-reboot";
|
|
offset = <0x0>;
|
|
mask = <0x1>;
|
|
};
|
|
};
|
|
|
|
periph_intc: interrupt-controller@fffe000c {
|
|
#address-cells = <1>;
|
|
compatible = "brcm,bcm6345-l1-intc";
|
|
reg = <0xfffe000c 0x8>,
|
|
<0xfffe0038 0x8>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
|
|
interrupt-parent = <&cpu_intc>;
|
|
interrupts = <2>, <3>;
|
|
};
|
|
|
|
ext_intc0: interrupt-controller@fffe0014 {
|
|
#address-cells = <1>;
|
|
compatible = "brcm,bcm6345-ext-intc";
|
|
reg = <0xfffe0014 0x4>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
|
|
interrupts = <BCM6358_IRQ_EXT0>,
|
|
<BCM6358_IRQ_EXT1>,
|
|
<BCM6358_IRQ_EXT2>,
|
|
<BCM6358_IRQ_EXT3>;
|
|
};
|
|
|
|
ext_intc1: interrupt-controller@fffe001c {
|
|
#address-cells = <1>;
|
|
compatible = "brcm,bcm6345-ext-intc";
|
|
reg = <0xfffe001c 0x4>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
|
|
interrupts = <BCM6358_IRQ_EXT4>,
|
|
<BCM6358_IRQ_EXT5>;
|
|
};
|
|
|
|
periph_rst: reset-controller@fffe0034 {
|
|
compatible = "brcm,bcm6345-reset";
|
|
reg = <0xfffe0034 0x4>;
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
wdt: watchdog@fffe005c {
|
|
compatible = "brcm,bcm7038-wdt";
|
|
reg = <0xfffe005c 0xc>;
|
|
|
|
clocks = <&periph_osc>;
|
|
|
|
timeout-sec = <30>;
|
|
};
|
|
|
|
gpio: syscon@fffe0080 {
|
|
compatible = "syscon", "simple-mfd";
|
|
reg = <0xfffe0080 0x50>;
|
|
native-endian;
|
|
|
|
pinctrl: pin-controller {
|
|
compatible = "brcm,bcm6358-pinctrl";
|
|
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
interrupts-extended = <&ext_intc1 0 0>,
|
|
<&ext_intc1 1 0>,
|
|
<&ext_intc0 0 0>,
|
|
<&ext_intc0 1 0>,
|
|
<&ext_intc0 2 0>,
|
|
<&ext_intc0 3 0>;
|
|
interrupt-names = "gpio32",
|
|
"gpio33",
|
|
"gpio34",
|
|
"gpio35",
|
|
"gpio36",
|
|
"gpio37";
|
|
|
|
pinctrl_ebi_cs: ebi_cs {
|
|
function = "ebi_cs";
|
|
groups = "ebi_cs_grp";
|
|
};
|
|
|
|
pinctrl_uart1: uart1 {
|
|
function = "uart1";
|
|
groups = "uart1_grp";
|
|
};
|
|
|
|
pinctrl_serial_led: serial_led {
|
|
function = "serial_led";
|
|
groups = "serial_led_grp";
|
|
};
|
|
|
|
pinctrl_legacy_led: legacy_led {
|
|
function = "legacy_led";
|
|
groups = "legacy_led_grp";
|
|
};
|
|
|
|
pinctrl_led: led {
|
|
function = "led";
|
|
groups = "led_grp";
|
|
};
|
|
|
|
pinctrl_spi_cs_23: spi_cs {
|
|
function = "spi_cs";
|
|
groups = "spi_cs_grp";
|
|
};
|
|
|
|
pinctrl_utopia: utopia {
|
|
function = "utopia";
|
|
groups = "utopia_grp";
|
|
};
|
|
|
|
pinctrl_pwm_syn_clk: pwm_syn_clk {
|
|
function = "pwm_syn_clk";
|
|
groups = "pwm_syn_clk_grp";
|
|
};
|
|
|
|
pinctrl_sys_irq: sys_irq {
|
|
function = "sys_irq";
|
|
groups = "sys_irq_grp";
|
|
};
|
|
};
|
|
};
|
|
|
|
leds: led-controller@fffe00d0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "brcm,bcm6358-leds";
|
|
reg = <0xfffe00d0 0x8>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
uart0: serial@fffe0100 {
|
|
compatible = "brcm,bcm6345-uart";
|
|
reg = <0xfffe0100 0x18>;
|
|
|
|
interrupt-parent = <&periph_intc>;
|
|
interrupts = <BCM6358_IRQ_UART0>;
|
|
|
|
clocks = <&periph_osc>;
|
|
clock-names = "periph";
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
uart1: serial@fffe0120 {
|
|
compatible = "brcm,bcm6345-uart";
|
|
reg = <0xfffe0120 0x18>;
|
|
|
|
interrupt-parent = <&periph_intc>;
|
|
interrupts = <BCM6358_IRQ_UART1>;
|
|
|
|
clocks = <&periph_osc>;
|
|
clock-names = "periph";
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
lsspi: spi@fffe0800 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "brcm,bcm6358-spi";
|
|
reg = <0xfffe0800 0x70c>;
|
|
|
|
interrupt-parent = <&periph_intc>;
|
|
interrupts = <BCM6358_IRQ_SPI>;
|
|
|
|
clocks = <&periph_clk BCM6358_CLK_SPI>;
|
|
clock-names = "spi";
|
|
|
|
resets = <&periph_rst BCM6358_RST_SPI>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
pci: pci@fffe1000 {
|
|
compatible = "brcm,bcm6348-pci";
|
|
reg = <0xfffe1000 0x200>,
|
|
<0x08000000 0x10000>;
|
|
reg-names = "pci",
|
|
"pci-io";
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
|
|
device_type = "pci";
|
|
bus-range = <0x00 0x01>;
|
|
ranges = <0x2000000 0 0x30000000 0x30000000 0 0x8000000>;
|
|
linux,pci-probe-only = <1>;
|
|
|
|
interrupt-parent = <&periph_intc>;
|
|
interrupts = <BCM6358_IRQ_MPI>;
|
|
|
|
resets = <&periph_rst BCM6358_RST_MPI>;
|
|
reset-names = "pci";
|
|
|
|
brcm,remap;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
ehci: usb@fffe1300 {
|
|
compatible = "brcm,bcm6358-ehci", "generic-ehci";
|
|
reg = <0xfffe1300 0x100>;
|
|
big-endian;
|
|
ignore-oc;
|
|
|
|
interrupt-parent = <&periph_intc>;
|
|
interrupts = <BCM6358_IRQ_EHCI>;
|
|
|
|
phys = <&usbh 0>;
|
|
phy-names = "usb";
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
ohci: usb@fffe1400 {
|
|
compatible = "brcm,bcm6358-ohci", "generic-ohci";
|
|
reg = <0xfffe1400 0x100>;
|
|
big-endian;
|
|
no-big-frame-no;
|
|
|
|
interrupt-parent = <&periph_intc>;
|
|
interrupts = <BCM6358_IRQ_OHCI>;
|
|
|
|
phys = <&usbh 0>;
|
|
phy-names = "usb";
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
usbh: usb-phy@fffe1500 {
|
|
compatible = "brcm,bcm6358-usbh-phy";
|
|
reg = <0xfffe1500 0x38>;
|
|
|
|
#phy-cells = <1>;
|
|
|
|
resets = <&periph_rst BCM6358_RST_USBH>;
|
|
|
|
status = "disabled";
|
|
};
|
|
};
|
|
};
|