Adrian Schmutzler 7ef7dbaf70 ath79: add support for TP-Link TL-WPA8630 v1 ... This ports the TP-Link TL-WPA8630 v1 from ar71xx to ath79. Specifications: SoC: QCA9563 CPU: 750 MHz Flash/RAM: 8 / 128 MiB Ethernet: 3x 1G ports (QCA8337 switch) WLAN: 2.4 GHz b/g/n, 5 GHz a/n/ac (ath10k) Buttons, LEDs and network setup appear to be almost identical to the v2 revision. Powerline interface is connected to switch port 5 (Label LAN4). Installation: No "fresh" device was available for testing the factory image. It is not known whether flashing via OEM firmware GUI is possible or not. A discussion from 2018 [1] about that indicates a few adjustments are necessary, but it is not clear whether those are already implemented with the TPLINK_HEADER_VERSION = 2 or not. Note that for the TL-WPA8630P v1, the TPLINK_HWID needs to be changed to 0x86310001 to allow factory flashing. [1] https://forum.openwrt.org/t/solved-tl-wpa8630p-lede-does-not-install/8161/27 Recovery: Recovery is only possible via serial. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>		2020-08-13 20:43:15 +02:00
..
01_leds	ath79: add support for TP-Link TL-WPA8630 v1	2020-08-13 20:43:15 +02:00
02_network	ath79: add support for TP-Link TL-WPA8630 v1	2020-08-13 20:43:15 +02:00
03_gpio_switches	ath79: add support for Telco T1	2020-08-10 12:49:29 +02:00