mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-20 14:13:16 +00:00
5e49c57956
1)Changes - Rebased the patches for linux-4.4.7 - Added patch to fix spi nor fifo and dma support - Added patch to configure watchdog barktime 2)Testing Tested on IPQ AP148 Board: a. NOR boot and NAND boot b. ethernet network and ath10k wifi c. ubi sysupgrade UnTested dwc3 usb has not been validated on IPQ board(AP148) 3)Known Issues: Once we flash ubi image on AP148, and if we reset the board, uboot on first boot creates PEB and LEB for dynamic sized partitions, which is incorrect and not what linux expects which causes errors when trying to mount rootfs. In order to test this, we can use the below steps: a. Flash the ubi image on board and don't reset the board b. load the kernel fit image in RAM and boot from there. Signed-off-by: Ram Chandra Jangir <rjangi@codeaurora.org>
217 lines
4.6 KiB
Diff
217 lines
4.6 KiB
Diff
From cab1f4720e82f2e17eaeed9a9ad9e4f07c742977 Mon Sep 17 00:00:00 2001
|
|
From: Mathieu Olivari <mathieu@codeaurora.org>
|
|
Date: Mon, 11 May 2015 12:29:18 -0700
|
|
Subject: [PATCH 8/8] ARM: dts: qcom: add gmac nodes to ipq806x platforms
|
|
|
|
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
|
|
---
|
|
arch/arm/boot/dts/qcom-ipq8064-ap148.dts | 31 ++++++++++++
|
|
arch/arm/boot/dts/qcom-ipq8064-db149.dts | 43 ++++++++++++++++
|
|
arch/arm/boot/dts/qcom-ipq8064.dtsi | 86 ++++++++++++++++++++++++++++++++
|
|
3 files changed, 160 insertions(+)
|
|
|
|
--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
|
|
+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
|
|
@@ -75,6 +75,16 @@
|
|
bias-disable;
|
|
};
|
|
};
|
|
+
|
|
+ rgmii2_pins: rgmii2_pins {
|
|
+ mux {
|
|
+ pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
|
|
+ "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
|
|
+ function = "rgmii2";
|
|
+ drive-strength = <8>;
|
|
+ bias-disable;
|
|
+ };
|
|
+ };
|
|
};
|
|
|
|
gsbi@16300000 {
|
|
@@ -198,6 +208,31 @@
|
|
reg = <4>;
|
|
};
|
|
};
|
|
+
|
|
+ gmac1: ethernet@37200000 {
|
|
+ status = "ok";
|
|
+ phy-mode = "rgmii";
|
|
+ qcom,id = <1>;
|
|
+
|
|
+ pinctrl-0 = <&rgmii2_pins>;
|
|
+ pinctrl-names = "default";
|
|
+
|
|
+ fixed-link {
|
|
+ speed = <1000>;
|
|
+ full-duplex;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ gmac2: ethernet@37400000 {
|
|
+ status = "ok";
|
|
+ phy-mode = "sgmii";
|
|
+ qcom,id = <2>;
|
|
+
|
|
+ fixed-link {
|
|
+ speed = <1000>;
|
|
+ full-duplex;
|
|
+ };
|
|
+ };
|
|
};
|
|
};
|
|
|
|
--- a/arch/arm/boot/dts/qcom-ipq8064-db149.dts
|
|
+++ b/arch/arm/boot/dts/qcom-ipq8064-db149.dts
|
|
@@ -48,6 +48,14 @@
|
|
bias-disable;
|
|
};
|
|
};
|
|
+
|
|
+ rgmii0_pins: rgmii0_pins {
|
|
+ mux {
|
|
+ pins = "gpio2", "gpio66";
|
|
+ drive-strength = <8>;
|
|
+ bias-disable;
|
|
+ };
|
|
+ };
|
|
};
|
|
|
|
gsbi2: gsbi@12480000 {
|
|
@@ -189,5 +197,40 @@
|
|
reg = <7>;
|
|
};
|
|
};
|
|
+
|
|
+ gmac0: ethernet@37000000 {
|
|
+ status = "ok";
|
|
+ phy-mode = "rgmii";
|
|
+ qcom,id = <0>;
|
|
+ phy-handle = <&phy4>;
|
|
+
|
|
+ pinctrl-0 = <&rgmii0_pins>;
|
|
+ pinctrl-names = "default";
|
|
+ };
|
|
+
|
|
+ gmac1: ethernet@37200000 {
|
|
+ status = "ok";
|
|
+ phy-mode = "sgmii";
|
|
+ qcom,id = <1>;
|
|
+
|
|
+ fixed-link {
|
|
+ speed = <1000>;
|
|
+ full-duplex;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ gmac2: ethernet@37400000 {
|
|
+ status = "ok";
|
|
+ phy-mode = "sgmii";
|
|
+ qcom,id = <2>;
|
|
+ phy-handle = <&phy6>;
|
|
+ };
|
|
+
|
|
+ gmac3: ethernet@37600000 {
|
|
+ status = "ok";
|
|
+ phy-mode = "sgmii";
|
|
+ qcom,id = <3>;
|
|
+ phy-handle = <&phy7>;
|
|
+ };
|
|
};
|
|
};
|
|
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
|
|
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
|
|
@@ -763,6 +763,92 @@
|
|
|
|
status = "disabled";
|
|
};
|
|
+
|
|
+ nss_common: syscon@03000000 {
|
|
+ compatible = "syscon";
|
|
+ reg = <0x03000000 0x0000FFFF>;
|
|
+ };
|
|
+
|
|
+ qsgmii_csr: syscon@1bb00000 {
|
|
+ compatible = "syscon";
|
|
+ reg = <0x1bb00000 0x000001FF>;
|
|
+ };
|
|
+
|
|
+ gmac0: ethernet@37000000 {
|
|
+ device_type = "network";
|
|
+ compatible = "qcom,ipq806x-gmac";
|
|
+ reg = <0x37000000 0x200000>;
|
|
+ interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
|
|
+ interrupt-names = "macirq";
|
|
+
|
|
+ qcom,nss-common = <&nss_common>;
|
|
+ qcom,qsgmii-csr = <&qsgmii_csr>;
|
|
+
|
|
+ clocks = <&gcc GMAC_CORE1_CLK>;
|
|
+ clock-names = "stmmaceth";
|
|
+
|
|
+ resets = <&gcc GMAC_CORE1_RESET>;
|
|
+ reset-names = "stmmaceth";
|
|
+
|
|
+ status = "disabled";
|
|
+ };
|
|
+
|
|
+ gmac1: ethernet@37200000 {
|
|
+ device_type = "network";
|
|
+ compatible = "qcom,ipq806x-gmac";
|
|
+ reg = <0x37200000 0x200000>;
|
|
+ interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
|
|
+ interrupt-names = "macirq";
|
|
+
|
|
+ qcom,nss-common = <&nss_common>;
|
|
+ qcom,qsgmii-csr = <&qsgmii_csr>;
|
|
+
|
|
+ clocks = <&gcc GMAC_CORE2_CLK>;
|
|
+ clock-names = "stmmaceth";
|
|
+
|
|
+ resets = <&gcc GMAC_CORE2_RESET>;
|
|
+ reset-names = "stmmaceth";
|
|
+
|
|
+ status = "disabled";
|
|
+ };
|
|
+
|
|
+ gmac2: ethernet@37400000 {
|
|
+ device_type = "network";
|
|
+ compatible = "qcom,ipq806x-gmac";
|
|
+ reg = <0x37400000 0x200000>;
|
|
+ interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
|
|
+ interrupt-names = "macirq";
|
|
+
|
|
+ qcom,nss-common = <&nss_common>;
|
|
+ qcom,qsgmii-csr = <&qsgmii_csr>;
|
|
+
|
|
+ clocks = <&gcc GMAC_CORE3_CLK>;
|
|
+ clock-names = "stmmaceth";
|
|
+
|
|
+ resets = <&gcc GMAC_CORE3_RESET>;
|
|
+ reset-names = "stmmaceth";
|
|
+
|
|
+ status = "disabled";
|
|
+ };
|
|
+
|
|
+ gmac3: ethernet@37600000 {
|
|
+ device_type = "network";
|
|
+ compatible = "qcom,ipq806x-gmac";
|
|
+ reg = <0x37600000 0x200000>;
|
|
+ interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
|
|
+ interrupt-names = "macirq";
|
|
+
|
|
+ qcom,nss-common = <&nss_common>;
|
|
+ qcom,qsgmii-csr = <&qsgmii_csr>;
|
|
+
|
|
+ clocks = <&gcc GMAC_CORE4_CLK>;
|
|
+ clock-names = "stmmaceth";
|
|
+
|
|
+ resets = <&gcc GMAC_CORE4_RESET>;
|
|
+ reset-names = "stmmaceth";
|
|
+
|
|
+ status = "disabled";
|
|
+ };
|
|
};
|
|
|
|
sfpb_mutex: sfpb-mutex {
|