openwrt/target/linux/ath79/dts/qca9563_phicomm_k2t.dts
Shiji Yang 7e71eef5ed
ath79: convert ath10k pre-calibration data to NVMEM (ASCII MAC)
This patch converts ath10k pre-calibration data to NVMEM format for
wave 2 devices with mtd ASCII MAC address. The "pre-calibration"
NVMEM cell size is 0x2f20. All unportable MAC address settings have
been moved to '10_fix_wifi_mac' scripts.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
2024-02-01 17:09:02 +01:00

148 lines
2.5 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qca956x.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
model = "Phicomm K2T";
compatible = "phicomm,k2t", "qca,qca9563";
aliases {
led-boot = &led_status_red;
led-failsafe = &led_status_red;
led-running = &led_status_red;
led-upgrade = &led_status_red;
};
leds {
compatible = "gpio-leds";
status_blue {
label = "blue:status";
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
};
led_status_red: status_red {
label = "red:status";
gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
};
status_yellow {
label = "yellow:status";
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
};
};
keys {
compatible = "gpio-keys";
reset {
linux,code = <KEY_RESTART>;
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
};
&pcie {
status = "okay";
wifi@0,0 {
compatible = "qcom,ath10k";
reg = <0x0000 0 0 0 0>;
nvmem-cells = <&precal_art_5000>;
nvmem-cell-names = "pre-calibration";
};
};
&spi {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x000000 0x30000>;
read-only;
};
partition@30000 {
label = "config";
reg = <0x030000 0x10000>;
read-only;
};
partition@40000 {
label = "permanent";
reg = <0x040000 0x50000>;
read-only;
};
partition@90000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x090000 0xf60000>;
};
art: partition@ff0000 {
label = "art";
reg = <0xff0000 0x010000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
precal_art_5000: pre-calibration@5000 {
reg = <0x5000 0x2f20>;
};
};
};
};
};
};
&mdio0 {
status = "okay";
phy0: ethernet-phy@0 {
reg = <0>;
phy-mode = "sgmii";
qca,ar8327-initvals = <
0x04 0x00080080 /* PORT0 PAD MODE CTRL */
0x10 0x81000080 /* POWER_ON_STRAP */
0x50 0xcc35cc35 /* LED_CTRL0 */
0x54 0xcb37cb37 /* LED_CTRL1 */
0x58 0x00000000 /* LED_CTRL2 */
0x5c 0x00f3cf00 /* LED_CTRL3 */
0x7c 0x0000007e /* PORT0_STATUS */
>;
};
};
&eth0 {
status = "okay";
pll-data = <0x03000101 0x00000101 0x00001919>;
phy-mode = "sgmii";
phy-handle = <&phy0>;
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
};