openwrt/target/linux/ath79/dts/ar9331_teltonika_rut230-v1.dts
Rosen Penev b7f26c6392 ath79: ar: convert to mac-base
Replacement for deprecated mac-address-increment

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2023-11-25 21:34:18 -08:00

207 lines
3.6 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "ar9331.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
model = "Teltonika RUT230 v1";
compatible = "teltonika,rut230-v1", "qca,ar9331";
aliases {
label-mac-device = &eth1;
led-boot = &led_ss0;
led-failsafe = &led_ss0;
led-upgrade = &led_ss0;
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
debounce-interval = <60>;
};
input {
label = "input";
linux,code = <BTN_0>;
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
sim-tray {
label = "sim-tray";
linux,code = <BTN_1>;
gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&switch_led_disable_pins>;
led_ss0: signal-strength-0 {
label = "green:signal-strength-0";
gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
};
signal-strength-1 {
label = "green:signal-strength-1";
gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
};
signal-strength-2 {
label = "green:signal-strength-2";
gpios = <&gpio 6 GPIO_ACTIVE_HIGH>;
};
signal-strength-3 {
label = "green:signal-strength-3";
gpios = <&gpio 26 GPIO_ACTIVE_HIGH>;
};
signal-strength-4 {
label = "green:signal-strength4";
gpios = <&gpio 27 GPIO_ACTIVE_HIGH>;
};
2g {
label = "green:2g";
gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
};
3g {
label = "green:3g";
gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
};
lan {
label = "green:lan";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
/* GPIO 13 - ACTIVE HIGH for hwrev 0 */
};
wan {
label = "green:wan";
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
/* GPIO 14 - ACTIVE HIGH for hwrev 0 */
};
/* 4G LED - GPIO21 ACTIVE_HIGH for RUT240 */
};
reg_usb_vbus: reg_usb_vbus {
compatible = "regulator-fixed";
regulator-name = "usb_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio 19 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
&eth0 {
status = "okay";
nvmem-cells = <&macaddr_config_0 1>;
nvmem-cell-names = "mac-address";
};
&eth1 {
status = "okay";
nvmem-cells = <&macaddr_config_0 0>;
nvmem-cell-names = "mac-address";
};
&spi {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <30000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x20000>;
read-only;
};
config: partition@20000 {
label = "config";
reg = <0x20000 0x10000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
macaddr_config_0: macaddr@0 {
compatible = "mac-base";
reg = <0x0 0x6>;
#nvmem-cell-cells = <1>;
};
};
};
art: partition@30000 {
label = "art";
reg = <0x30000 0x10000>;
read-only;
};
partition@40000 {
compatible = "tplink,firmware";
label = "firmware";
reg = <0x40000 0xf30000>;
};
partition@f70000 {
label = "event-log";
reg = <0xf70000 0x90000>;
read-only;
};
};
};
};
&usb {
dr_mode = "host";
vbus-supply = <&reg_usb_vbus>;
status = "okay";
};
&gpio {
modem-power {
gpio-hog;
output-low;
gpios = <18 GPIO_ACTIVE_HIGH>;
line-name = "modem-power";
};
};
&usb_phy {
status = "okay";
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
nvmem-cells = <&macaddr_config_0 2>;
nvmem-cell-names = "mac-address";
};