mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-29 18:19:02 +00:00
ad84c09502
This patch adds support for the COMFAST CF-E130N v2, an outdoor wireless CPE with a single Ethernet port and a 802.11bgn radio. Specifications: - QCA9531 SoC - 1x 10/100 Mbps Ethernet with PoE-in support - 64 MB of RAM (DDR2) - 16 MB of FLASH - 5 dBi built-in antenna - POWER/LAN/WLAN green LEDs - 4x RSSI LEDs (2x red, 2x green) - UART (115200 8N1) and GPIO (J9) headers on PCB Flashing instructions: The original firmware is based on OpenWrt so a sysupgrade image can be installed via the stock web GUI. The U-boot bootloader also contains a backup TFTP client to upload the firmware from. Upon boot, it checks its ethernet network for the IP 192.168.1.10. Host a TFTP server and provide the image to be flashed as file firmware_auto.bin. MAC address setup: The art partition contains four consecutive MAC addresses: 0x0 aa:bb:cc:xx:xx:c4 0x6 aa:bb:cc:xx:xx:c6 0x1002 aa:bb:cc:xx:xx:c5 0x5006 aa:bb:cc:xx:xx:c7 However, the manufacturer in its infinite wisdom decided that one address is enough and both eth0 and WiFi get the MAC address from 0x0 (yes, that's overwriting the existing and valid address in 0x1002). This is obviously also the address on the device's label. Signed-off-by: Pavel Balan <admin@kryma.net> [fix configs partition, fix IMAGE_SIZE, add MAC address comment, rename ATH_SOC to SOC] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
1289 lines
36 KiB
Makefile
1289 lines
36 KiB
Makefile
include ./common-buffalo.mk
|
|
include ./common-netgear.mk
|
|
include ./common-tp-link.mk
|
|
include ./common-yuncore.mk
|
|
|
|
DEVICE_VARS += ADDPATTERN_ID ADDPATTERN_VERSION
|
|
DEVICE_VARS += SEAMA_SIGNATURE SEAMA_MTDBLOCK
|
|
DEVICE_VARS += KERNEL_INITRAMFS_PREFIX
|
|
|
|
define Build/add-elecom-factory-initramfs
|
|
$(eval edimax_model=$(word 1,$(1)))
|
|
$(eval product=$(word 2,$(1)))
|
|
|
|
$(STAGING_DIR_HOST)/bin/mkedimaximg \
|
|
-b -s CSYS -m $(edimax_model) \
|
|
-f 0x70000 -S 0x01100000 \
|
|
-i $@ -o $@.factory
|
|
|
|
( \
|
|
echo -n -e "ELECOM\x00\x00$(product)" | dd bs=40 count=1 conv=sync; \
|
|
echo -n "0.00" | dd bs=16 count=1 conv=sync; \
|
|
dd if=$@.factory; \
|
|
) > $@.factory.new
|
|
|
|
if [ "$$(stat -c%s $@.factory.new)" -le $$(($(subst k,* 1024,$(subst m, * 1024k,$(IMAGE_SIZE))))) ]; then \
|
|
mv $@.factory.new $(BIN_DIR)/$(KERNEL_INITRAMFS_PREFIX)-factory.bin; \
|
|
else \
|
|
echo "WARNING: initramfs kernel image too big, cannot generate factory image" >&2; \
|
|
fi
|
|
endef
|
|
|
|
define Build/addpattern
|
|
-$(STAGING_DIR_HOST)/bin/addpattern -B $(ADDPATTERN_ID) \
|
|
-v v$(ADDPATTERN_VERSION) -i $@ -o $@.new
|
|
-mv "$@.new" "$@"
|
|
endef
|
|
|
|
define Build/append-md5sum-bin
|
|
$(STAGING_DIR_HOST)/bin/mkhash md5 $@ | sed 's/../\\\\x&/g' |\
|
|
xargs echo -ne >> $@
|
|
endef
|
|
|
|
define Build/cybertan-trx
|
|
@echo -n '' > $@-empty.bin
|
|
-$(STAGING_DIR_HOST)/bin/trx -o $@.new \
|
|
-f $(IMAGE_KERNEL) -F $@-empty.bin \
|
|
-x 32 -a 0x10000 -x -32 -f $@
|
|
-mv "$@.new" "$@"
|
|
-rm $@-empty.bin
|
|
endef
|
|
|
|
define Build/nec-enc
|
|
$(STAGING_DIR_HOST)/bin/nec-enc \
|
|
-i $@ -o $@.new -k $(1)
|
|
mv $@.new $@
|
|
endef
|
|
|
|
define Build/nec-fw
|
|
( stat -c%s $@ | tr -d "\n" | dd bs=16 count=1 conv=sync; ) >> $@
|
|
( \
|
|
echo -n -e "$(1)" | dd bs=16 count=1 conv=sync; \
|
|
echo -n "0.0.00" | dd bs=16 count=1 conv=sync; \
|
|
dd if=$@; \
|
|
) > $@.new
|
|
mv $@.new $@
|
|
endef
|
|
|
|
define Build/pisen_wmb001n-factory
|
|
-[ -f "$@" ] && \
|
|
mkdir -p "$@.tmp" && \
|
|
cp "$(KDIR)/loader-$(word 1,$(1)).uImage" "$@.tmp/uImage" && \
|
|
mv "$@" "$@.tmp/rootfs" && \
|
|
cp "bin/pisen_wmb001n_factory-header.bin" "$@" && \
|
|
$(TAR) -cp --numeric-owner --owner=0 --group=0 --mode=a-s --sort=name \
|
|
$(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \
|
|
-C "$@.tmp" . | gzip -9n >> "$@" && \
|
|
rm -rf "$@.tmp"
|
|
endef
|
|
|
|
define Build/teltonika-fw-fake-checksum
|
|
# Teltonika U-Boot web based firmware upgrade/recovery routine compares
|
|
# 16 bytes from md5sum1[16] field in TP-Link v1 header (offset: 76 bytes
|
|
# from begin of the firmware file) with 16 bytes stored just before
|
|
# 0xdeadc0de marker. Values are only compared, MD5 sum is not verified.
|
|
let \
|
|
offs="$$(stat -c%s $@) - 20"; \
|
|
dd if=$@ bs=1 count=16 skip=76 |\
|
|
dd of=$@ bs=1 count=16 seek=$$offs conv=notrunc
|
|
endef
|
|
|
|
define Device/seama
|
|
KERNEL := kernel-bin | append-dtb | relocate-kernel | lzma
|
|
KERNEL_INITRAMFS := $$(KERNEL) | seama
|
|
IMAGES += factory.bin
|
|
SEAMA_MTDBLOCK := 1
|
|
|
|
# 64 bytes offset:
|
|
# - 28 bytes seama_header
|
|
# - 36 bytes of META data (4-bytes aligned)
|
|
IMAGE/default := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | append-rootfs
|
|
IMAGE/sysupgrade.bin := $$(IMAGE/default) | seama | pad-rootfs | \
|
|
append-metadata | check-size
|
|
IMAGE/factory.bin := $$(IMAGE/default) | pad-rootfs -x 64 | seama | \
|
|
seama-seal | check-size
|
|
SEAMA_SIGNATURE :=
|
|
endef
|
|
|
|
|
|
define Device/8dev_carambola2
|
|
SOC := ar9331
|
|
DEVICE_VENDOR := 8devices
|
|
DEVICE_MODEL := Carambola2
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-chipidea2
|
|
IMAGE_SIZE := 16000k
|
|
SUPPORTED_DEVICES += carambola2
|
|
endef
|
|
TARGET_DEVICES += 8dev_carambola2
|
|
|
|
define Device/adtran_bsap1880
|
|
SOC := ar7161
|
|
DEVICE_VENDOR := Adtran/Bluesocket
|
|
DEVICE_PACKAGES += -swconfig -uboot-envtools fconfig
|
|
KERNEL := kernel-bin | append-dtb | lzma | pad-to $$(BLOCKSIZE)
|
|
KERNEL_INITRAMFS := kernel-bin | append-dtb
|
|
IMAGE_SIZE := 11200k
|
|
IMAGES += kernel.bin rootfs.bin
|
|
IMAGE/kernel.bin := append-kernel
|
|
IMAGE/rootfs.bin := append-rootfs | pad-rootfs
|
|
IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | \
|
|
check-size | sysupgrade-tar rootfs=$$$$@ | append-metadata
|
|
endef
|
|
|
|
define Device/adtran_bsap1800-v2
|
|
$(Device/adtran_bsap1880)
|
|
DEVICE_MODEL := BSAP-1800
|
|
DEVICE_VARIANT := v2
|
|
endef
|
|
TARGET_DEVICES += adtran_bsap1800-v2
|
|
|
|
define Device/adtran_bsap1840
|
|
$(Device/adtran_bsap1880)
|
|
DEVICE_MODEL := BSAP-1840
|
|
endef
|
|
TARGET_DEVICES += adtran_bsap1840
|
|
|
|
define Device/alfa-network_ap121f
|
|
SOC := ar9331
|
|
DEVICE_VENDOR := ALFA Network
|
|
DEVICE_MODEL := AP121F
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-chipidea2 kmod-usb-storage -swconfig
|
|
IMAGE_SIZE := 16064k
|
|
SUPPORTED_DEVICES += ap121f
|
|
endef
|
|
TARGET_DEVICES += alfa-network_ap121f
|
|
|
|
define Device/aruba_ap-105
|
|
SOC := ar7161
|
|
DEVICE_VENDOR := Aruba
|
|
DEVICE_MODEL := AP-105
|
|
IMAGE_SIZE := 16000k
|
|
DEVICE_PACKAGES := kmod-i2c-gpio kmod-tpm-i2c-atmel
|
|
endef
|
|
TARGET_DEVICES += aruba_ap-105
|
|
|
|
define Device/avm
|
|
DEVICE_VENDOR := AVM
|
|
KERNEL := kernel-bin | append-dtb | lzma | eva-image
|
|
KERNEL_INITRAMFS := $$(KERNEL)
|
|
IMAGE/sysupgrade.bin := append-kernel | pad-to 64k | \
|
|
append-squashfs-fakeroot-be | pad-to 256 | append-rootfs | pad-rootfs | \
|
|
append-metadata | check-size
|
|
DEVICE_PACKAGES := fritz-tffs
|
|
endef
|
|
|
|
define Device/avm_fritz1750e
|
|
$(Device/avm)
|
|
SOC := qca9556
|
|
IMAGE_SIZE := 15232k
|
|
DEVICE_MODEL := FRITZ!WLAN Repeater 1750E
|
|
DEVICE_PACKAGES += rssileds kmod-ath10k-ct-smallbuffers \
|
|
ath10k-firmware-qca988x-ct -swconfig
|
|
endef
|
|
TARGET_DEVICES += avm_fritz1750e
|
|
|
|
define Device/avm_fritz300e
|
|
$(Device/avm)
|
|
SOC := ar7242
|
|
IMAGE_SIZE := 15232k
|
|
DEVICE_MODEL := FRITZ!WLAN Repeater 300E
|
|
DEVICE_PACKAGES += rssileds -swconfig
|
|
SUPPORTED_DEVICES += fritz300e
|
|
endef
|
|
TARGET_DEVICES += avm_fritz300e
|
|
|
|
define Device/avm_fritz4020
|
|
$(Device/avm)
|
|
SOC := qca9561
|
|
IMAGE_SIZE := 15232k
|
|
DEVICE_MODEL := FRITZ!Box 4020
|
|
SUPPORTED_DEVICES += fritz4020
|
|
endef
|
|
TARGET_DEVICES += avm_fritz4020
|
|
|
|
define Device/avm_fritz450e
|
|
$(Device/avm)
|
|
SOC := qca9556
|
|
IMAGE_SIZE := 15232k
|
|
DEVICE_MODEL := FRITZ!WLAN Repeater 450E
|
|
SUPPORTED_DEVICES += fritz450e
|
|
endef
|
|
TARGET_DEVICES += avm_fritz450e
|
|
|
|
define Device/buffalo_bhr-4grv
|
|
SOC := ar7242
|
|
DEVICE_VENDOR := Buffalo
|
|
DEVICE_MODEL := BHR-4GRV
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
|
|
IMAGE_SIZE := 32256k
|
|
IMAGES += factory.bin tftp.bin
|
|
IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | \
|
|
pad-rootfs | check-size
|
|
IMAGE/factory.bin := $$(IMAGE/default) | buffalo-enc BHR-4GRV 1.99 | \
|
|
buffalo-tag BHR-4GRV 3
|
|
IMAGE/tftp.bin := $$(IMAGE/default) | buffalo-tftp-header
|
|
SUPPORTED_DEVICES += wzr-hp-g450h
|
|
endef
|
|
TARGET_DEVICES += buffalo_bhr-4grv
|
|
|
|
define Device/buffalo_bhr-4grv2
|
|
SOC := qca9557
|
|
DEVICE_VENDOR := Buffalo
|
|
DEVICE_MODEL := BHR-4GRV2
|
|
IMAGE_SIZE := 16000k
|
|
endef
|
|
TARGET_DEVICES += buffalo_bhr-4grv2
|
|
|
|
define Device/buffalo_wzr-hp-ag300h
|
|
SOC := ar7161
|
|
DEVICE_VENDOR := Buffalo
|
|
DEVICE_MODEL := WZR-HP-AG300H
|
|
IMAGE_SIZE := 32320k
|
|
IMAGES += factory.bin tftp.bin
|
|
IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | \
|
|
pad-rootfs | check-size
|
|
IMAGE/factory.bin := $$(IMAGE/default) | buffalo-enc WZR-HP-AG300H 1.99 | \
|
|
buffalo-tag WZR-HP-AG300H 3
|
|
IMAGE/tftp.bin := $$(IMAGE/default) | buffalo-tftp-header
|
|
DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport \
|
|
kmod-leds-reset kmod-owl-loader
|
|
SUPPORTED_DEVICES += wzr-hp-ag300h
|
|
endef
|
|
TARGET_DEVICES += buffalo_wzr-hp-ag300h
|
|
|
|
define Device/buffalo_wzr-hp-g302h-a1a0
|
|
SOC := ar7242
|
|
DEVICE_VENDOR := Buffalo
|
|
DEVICE_MODEL := WZR-HP-G302H
|
|
DEVICE_VARIANT := A1A0
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
|
|
IMAGE_SIZE := 32128k
|
|
IMAGES += factory.bin tftp.bin
|
|
IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | \
|
|
pad-rootfs | check-size
|
|
IMAGE/factory.bin := $$(IMAGE/default) | buffalo-enc WZR-HP-G302H 1.99 | \
|
|
buffalo-tag WZR-HP-G302H 4
|
|
IMAGE/tftp.bin := $$(IMAGE/default) | buffalo-tftp-header
|
|
SUPPORTED_DEVICES += wzr-hp-g300nh2
|
|
endef
|
|
TARGET_DEVICES += buffalo_wzr-hp-g302h-a1a0
|
|
|
|
define Device/buffalo_wzr-hp-g450h
|
|
SOC := ar7242
|
|
DEVICE_VENDOR := Buffalo
|
|
DEVICE_MODEL := WZR-HP-G450H/WZR-450HP
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
|
|
IMAGE_SIZE := 32256k
|
|
IMAGES += factory.bin tftp.bin
|
|
IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | \
|
|
pad-rootfs | check-size
|
|
IMAGE/factory.bin := $$(IMAGE/default) | buffalo-enc WZR-HP-G450H 1.99 | \
|
|
buffalo-tag WZR-HP-G450H 3
|
|
IMAGE/tftp.bin := $$(IMAGE/default) | buffalo-tftp-header
|
|
SUPPORTED_DEVICES += wzr-hp-g450h
|
|
endef
|
|
TARGET_DEVICES += buffalo_wzr-hp-g450h
|
|
|
|
define Device/comfast_cf-e110n-v2
|
|
SOC := qca9533
|
|
DEVICE_VENDOR := COMFAST
|
|
DEVICE_MODEL := CF-E110N
|
|
DEVICE_VARIANT := v2
|
|
DEVICE_PACKAGES := rssileds kmod-leds-gpio -swconfig -uboot-envtools
|
|
IMAGE_SIZE := 16192k
|
|
endef
|
|
TARGET_DEVICES += comfast_cf-e110n-v2
|
|
|
|
define Device/comfast_cf-e120a-v3
|
|
SOC := ar9344
|
|
DEVICE_VENDOR := COMFAST
|
|
DEVICE_MODEL := CF-E120A
|
|
DEVICE_VARIANT := v3
|
|
DEVICE_PACKAGES := rssileds kmod-leds-gpio -uboot-envtools
|
|
IMAGE_SIZE := 8000k
|
|
endef
|
|
TARGET_DEVICES += comfast_cf-e120a-v3
|
|
|
|
define Device/comfast_cf-e130n-v2
|
|
SOC := qca9531
|
|
DEVICE_VENDOR := COMFAST
|
|
DEVICE_MODEL := CF-E130N
|
|
DEVICE_VARIANT := v2
|
|
DEVICE_PACKAGES := rssileds kmod-leds-gpio -swconfig -uboot-envtools
|
|
IMAGE_SIZE := 7936k
|
|
endef
|
|
TARGET_DEVICES += comfast_cf-e130n-v2
|
|
|
|
define Device/comfast_cf-e313ac
|
|
SOC := qca9531
|
|
DEVICE_VENDOR := COMFAST
|
|
DEVICE_MODEL := CF-E313AC
|
|
DEVICE_PACKAGES := rssileds kmod-leds-gpio kmod-ath10k-ct-smallbuffers \
|
|
ath10k-firmware-qca9888-ct -swconfig -uboot-envtools
|
|
IMAGE_SIZE := 7936k
|
|
endef
|
|
TARGET_DEVICES += comfast_cf-e313ac
|
|
|
|
define Device/comfast_cf-e314n-v2
|
|
SOC := qca9531
|
|
DEVICE_VENDOR := COMFAST
|
|
DEVICE_MODEL := CF-E314N
|
|
DEVICE_VARIANT := v2
|
|
DEVICE_PACKAGES := rssileds
|
|
IMAGE_SIZE := 7936k
|
|
endef
|
|
TARGET_DEVICES += comfast_cf-e314n-v2
|
|
|
|
define Device/comfast_cf-e5
|
|
SOC := qca9531
|
|
DEVICE_VENDOR := COMFAST
|
|
DEVICE_MODEL := CF-E5/E7
|
|
DEVICE_PACKAGES := rssileds kmod-leds-gpio kmod-usb2 kmod-usb-net \
|
|
kmod-usb-net-qmi-wwan -swconfig -uboot-envtools
|
|
IMAGE_SIZE := 16192k
|
|
endef
|
|
TARGET_DEVICES += comfast_cf-e5
|
|
|
|
define Device/comfast_cf-e560ac
|
|
SOC := qca9531
|
|
DEVICE_VENDOR := COMFAST
|
|
DEVICE_MODEL := CF-E560AC
|
|
DEVICE_PACKAGES := kmod-leds-gpio kmod-usb2 kmod-ath10k-ct \
|
|
ath10k-firmware-qca9888-ct
|
|
IMAGE_SIZE := 16128k
|
|
endef
|
|
TARGET_DEVICES += comfast_cf-e560ac
|
|
|
|
define Device/comfast_cf-ew72
|
|
SOC := qca9531
|
|
DEVICE_VENDOR := COMFAST
|
|
DEVICE_MODEL := CF-EW72
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca9888-ct \
|
|
-uboot-envtools -swconfig
|
|
IMAGE_SIZE := 16192k
|
|
endef
|
|
TARGET_DEVICES += comfast_cf-ew72
|
|
|
|
define Device/comfast_cf-wr650ac-v1
|
|
SOC := qca9558
|
|
DEVICE_VENDOR := COMFAST
|
|
DEVICE_MODEL := CF-WR650AC
|
|
DEVICE_VARIANT := v1
|
|
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
|
|
IMAGE_SIZE := 16128k
|
|
endef
|
|
TARGET_DEVICES += comfast_cf-wr650ac-v1
|
|
|
|
define Device/comfast_cf-wr650ac-v2
|
|
SOC := qca9558
|
|
DEVICE_VENDOR := COMFAST
|
|
DEVICE_MODEL := CF-WR650AC
|
|
DEVICE_VARIANT := v2
|
|
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
|
|
IMAGE_SIZE := 16000k
|
|
endef
|
|
TARGET_DEVICES += comfast_cf-wr650ac-v2
|
|
|
|
define Device/comfast_cf-wr752ac-v1
|
|
SOC := qca9531
|
|
DEVICE_VENDOR := COMFAST
|
|
DEVICE_MODEL := CF-WR752AC
|
|
DEVICE_VARIANT := v1
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca9888-ct \
|
|
-uboot-envtools
|
|
IMAGE_SIZE := 16192k
|
|
endef
|
|
TARGET_DEVICES += comfast_cf-wr752ac-v1
|
|
|
|
define Device/devolo_dvl1200e
|
|
SOC := qca9558
|
|
DEVICE_VENDOR := devolo
|
|
DEVICE_MODEL := WiFi pro 1200e
|
|
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
|
|
IMAGE_SIZE := 15936k
|
|
endef
|
|
TARGET_DEVICES += devolo_dvl1200e
|
|
|
|
define Device/devolo_dvl1200i
|
|
SOC := qca9558
|
|
DEVICE_VENDOR := devolo
|
|
DEVICE_MODEL := WiFi pro 1200i
|
|
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
|
|
IMAGE_SIZE := 15936k
|
|
endef
|
|
TARGET_DEVICES += devolo_dvl1200i
|
|
|
|
define Device/devolo_dvl1750c
|
|
SOC := qca9558
|
|
DEVICE_VENDOR := devolo
|
|
DEVICE_MODEL := WiFi pro 1750c
|
|
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
|
|
IMAGE_SIZE := 15936k
|
|
endef
|
|
TARGET_DEVICES += devolo_dvl1750c
|
|
|
|
define Device/devolo_dvl1750e
|
|
SOC := qca9558
|
|
DEVICE_VENDOR := devolo
|
|
DEVICE_MODEL := WiFi pro 1750e
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca988x-ct
|
|
IMAGE_SIZE := 15936k
|
|
endef
|
|
TARGET_DEVICES += devolo_dvl1750e
|
|
|
|
define Device/devolo_dvl1750i
|
|
SOC := qca9558
|
|
DEVICE_VENDOR := devolo
|
|
DEVICE_MODEL := WiFi pro 1750i
|
|
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
|
|
IMAGE_SIZE := 15936k
|
|
endef
|
|
TARGET_DEVICES += devolo_dvl1750i
|
|
|
|
define Device/devolo_dvl1750x
|
|
SOC := qca9558
|
|
DEVICE_VENDOR := devolo
|
|
DEVICE_MODEL := WiFi pro 1750x
|
|
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
|
|
IMAGE_SIZE := 15936k
|
|
endef
|
|
TARGET_DEVICES += devolo_dvl1750x
|
|
|
|
define Device/devolo_magic-2-wifi
|
|
SOC := ar9344
|
|
DEVICE_VENDOR := Devolo
|
|
DEVICE_MODEL := Magic 2 WiFi
|
|
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
|
|
IMAGE_SIZE := 15872k
|
|
endef
|
|
TARGET_DEVICES += devolo_magic-2-wifi
|
|
|
|
define Device/dlink_dir-505
|
|
SOC := ar9330
|
|
DEVICE_VENDOR := D-Link
|
|
DEVICE_MODEL := DIR-505
|
|
IMAGE_SIZE := 7680k
|
|
DEVICE_PACKAGES := kmod-usb2
|
|
SUPPORTED_DEVICES += dir-505-a1
|
|
endef
|
|
TARGET_DEVICES += dlink_dir-505
|
|
|
|
define Device/dlink_dir-825-b1
|
|
SOC := ar7161
|
|
DEVICE_VENDOR := D-Link
|
|
DEVICE_MODEL := DIR-825
|
|
DEVICE_VARIANT := B1
|
|
IMAGE_SIZE := 6208k
|
|
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \
|
|
append-metadata | check-size
|
|
DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport \
|
|
kmod-leds-reset kmod-owl-loader
|
|
SUPPORTED_DEVICES += dir-825-b1
|
|
endef
|
|
TARGET_DEVICES += dlink_dir-825-b1
|
|
|
|
define Device/dlink_dir-825-c1
|
|
SOC := ar9344
|
|
DEVICE_VENDOR := D-Link
|
|
DEVICE_MODEL := DIR-825
|
|
DEVICE_VARIANT := C1
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-leds-reset \
|
|
kmod-owl-loader
|
|
SUPPORTED_DEVICES += dir-825-c1
|
|
IMAGE_SIZE := 15936k
|
|
IMAGES := factory.bin sysupgrade.bin
|
|
IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | \
|
|
pad-rootfs
|
|
IMAGE/factory.bin := $$(IMAGE/default) | pad-offset $$$$(IMAGE_SIZE) 26 | \
|
|
append-string 00DB120AR9344-RT-101214-00 | check-size
|
|
IMAGE/sysupgrade.bin := $$(IMAGE/default) | append-metadata | \
|
|
check-size
|
|
endef
|
|
TARGET_DEVICES += dlink_dir-825-c1
|
|
|
|
define Device/dlink_dir-835-a1
|
|
SOC := ar9344
|
|
DEVICE_VENDOR := D-Link
|
|
DEVICE_MODEL := DIR-835
|
|
DEVICE_VARIANT := A1
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-leds-reset kmod-owl-loader
|
|
SUPPORTED_DEVICES += dir-835-a1
|
|
IMAGE_SIZE := 15936k
|
|
IMAGES := factory.bin sysupgrade.bin
|
|
IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | \
|
|
pad-rootfs
|
|
IMAGE/factory.bin := $$(IMAGE/default) | pad-offset $$$$(IMAGE_SIZE) 26 | \
|
|
append-string 00DB120AR9344-RT-101214-00 | check-size
|
|
IMAGE/sysupgrade.bin := $$(IMAGE/default) | append-metadata | \
|
|
check-size
|
|
endef
|
|
TARGET_DEVICES += dlink_dir-835-a1
|
|
|
|
define Device/dlink_dir-842-c
|
|
SOC := qca9563
|
|
DEVICE_VENDOR := D-Link
|
|
DEVICE_MODEL := DIR-842
|
|
KERNEL := kernel-bin | append-dtb | relocate-kernel | lzma
|
|
KERNEL_INITRAMFS := $$(KERNEL) | seama
|
|
IMAGES += factory.bin
|
|
SEAMA_MTDBLOCK := 5
|
|
SEAMA_SIGNATURE := wrgac65_dlink.2015_dir842
|
|
# 64 bytes offset:
|
|
# - 28 bytes seama_header
|
|
# - 36 bytes of META data (4-bytes aligned)
|
|
IMAGE/default := append-kernel | uImage lzma | \
|
|
pad-offset $$$$(BLOCKSIZE) 64 | append-rootfs
|
|
IMAGE/sysupgrade.bin := $$(IMAGE/default) | seama | pad-rootfs | \
|
|
append-metadata | check-size
|
|
IMAGE/factory.bin := $$(IMAGE/default) | pad-rootfs -x 64 | seama | \
|
|
seama-seal | check-size
|
|
IMAGE_SIZE := 15680k
|
|
endef
|
|
|
|
define Device/dlink_dir-842-c1
|
|
$(Device/dlink_dir-842-c)
|
|
DEVICE_VARIANT := C1
|
|
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9888-ct
|
|
endef
|
|
TARGET_DEVICES += dlink_dir-842-c1
|
|
|
|
define Device/dlink_dir-842-c2
|
|
$(Device/dlink_dir-842-c)
|
|
DEVICE_VARIANT := C2
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca9888-ct
|
|
endef
|
|
TARGET_DEVICES += dlink_dir-842-c2
|
|
|
|
define Device/dlink_dir-842-c3
|
|
$(Device/dlink_dir-842-c)
|
|
DEVICE_VARIANT := C3
|
|
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9888-ct
|
|
endef
|
|
TARGET_DEVICES += dlink_dir-842-c3
|
|
|
|
define Device/dlink_dir-859-a1
|
|
$(Device/seama)
|
|
SOC := qca9563
|
|
DEVICE_VENDOR := D-Link
|
|
DEVICE_MODEL := DIR-859
|
|
DEVICE_VARIANT := A1
|
|
IMAGE_SIZE := 15872k
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct
|
|
SEAMA_SIGNATURE := wrgac37_dlink.2013gui_dir859
|
|
endef
|
|
TARGET_DEVICES += dlink_dir-859-a1
|
|
|
|
define Device/elecom_wrc-1750ghbk2-i
|
|
SOC := qca9563
|
|
DEVICE_VENDOR := ELECOM
|
|
DEVICE_MODEL := WRC-1750GHBK2-I/C
|
|
IMAGE_SIZE := 15808k
|
|
KERNEL_INITRAMFS := $$(KERNEL) | pad-to 2 | \
|
|
add-elecom-factory-initramfs RN68 WRC-1750GHBK2
|
|
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
|
|
endef
|
|
TARGET_DEVICES += elecom_wrc-1750ghbk2-i
|
|
|
|
define Device/elecom_wrc-300ghbk2-i
|
|
SOC := qca9563
|
|
DEVICE_VENDOR := ELECOM
|
|
DEVICE_MODEL := WRC-300GHBK2-I
|
|
IMAGE_SIZE := 7616k
|
|
KERNEL_INITRAMFS := $$(KERNEL) | pad-to 2 | \
|
|
add-elecom-factory-initramfs RN51 WRC-300GHBK2-I
|
|
endef
|
|
TARGET_DEVICES += elecom_wrc-300ghbk2-i
|
|
|
|
define Device/embeddedwireless_dorin
|
|
SOC := ar9331
|
|
DEVICE_VENDOR := Embedded Wireless
|
|
DEVICE_MODEL := Dorin
|
|
DEVICE_PACKAGES := kmod-usb-chipidea2
|
|
IMAGE_SIZE := 16000k
|
|
endef
|
|
TARGET_DEVICES += embeddedwireless_dorin
|
|
|
|
define Device/engenius_ecb1750
|
|
SOC := qca9558
|
|
DEVICE_VENDOR := EnGenius
|
|
DEVICE_MODEL := ECB1750
|
|
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
|
|
IMAGE_SIZE := 15680k
|
|
IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
|
|
append-rootfs | pad-rootfs | check-size | \
|
|
senao-header -r 0x101 -p 0x6d -t 2
|
|
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \
|
|
append-metadata | check-size
|
|
endef
|
|
TARGET_DEVICES += engenius_ecb1750
|
|
|
|
define Device/engenius_epg5000
|
|
SOC := qca9558
|
|
DEVICE_VENDOR := EnGenius
|
|
DEVICE_MODEL := EPG5000
|
|
DEVICE_PACKAGES := ath10k-firmware-qca988x-ct kmod-ath10k-ct kmod-usb2
|
|
IMAGE_SIZE := 14656k
|
|
IMAGES += factory.dlf
|
|
IMAGE/factory.dlf := append-kernel | pad-to $$$$(BLOCKSIZE) | \
|
|
append-rootfs | pad-rootfs | check-size | \
|
|
senao-header -r 0x101 -p 0x71 -t 2
|
|
SUPPORTED_DEVICES += epg5000
|
|
endef
|
|
TARGET_DEVICES += engenius_epg5000
|
|
|
|
define Device/engenius_ews511ap
|
|
SOC := qca9531
|
|
DEVICE_VENDOR := EnGenius
|
|
DEVICE_MODEL := EWS511AP
|
|
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9887-ct
|
|
IMAGE_SIZE := 16000k
|
|
endef
|
|
TARGET_DEVICES += engenius_ews511ap
|
|
|
|
define Device/enterasys_ws-ap3705i
|
|
SOC := ar9344
|
|
DEVICE_VENDOR := Enterasys
|
|
DEVICE_MODEL := WS-AP3705i
|
|
IMAGE_SIZE := 30528k
|
|
endef
|
|
TARGET_DEVICES += enterasys_ws-ap3705i
|
|
|
|
define Device/etactica_eg200
|
|
SOC := ar9331
|
|
DEVICE_VENDOR := eTactica
|
|
DEVICE_MODEL := EG200
|
|
DEVICE_PACKAGES := kmod-usb-chipidea2 kmod-ledtrig-oneshot \
|
|
kmod-usb-serial kmod-usb-serial-ftdi kmod-usb-storage kmod-fs-ext4
|
|
IMAGE_SIZE := 16000k
|
|
SUPPORTED_DEVICES += rme-eg200
|
|
endef
|
|
TARGET_DEVICES += etactica_eg200
|
|
|
|
define Device/glinet_6408
|
|
$(Device/tplink-8mlzma)
|
|
SOC := ar9331
|
|
DEVICE_VENDOR := GL.iNet
|
|
DEVICE_MODEL := 6408
|
|
DEVICE_PACKAGES := kmod-usb2
|
|
IMAGE_SIZE := 8000k
|
|
TPLINK_HWID := 0x08000001
|
|
IMAGES := sysupgrade.bin
|
|
SUPPORTED_DEVICES += gl-inet
|
|
endef
|
|
TARGET_DEVICES += glinet_6408
|
|
|
|
define Device/glinet_6416
|
|
$(Device/tplink-16mlzma)
|
|
SOC := ar9331
|
|
DEVICE_VENDOR := GL.iNet
|
|
DEVICE_MODEL := 6416
|
|
DEVICE_PACKAGES := kmod-usb2
|
|
IMAGE_SIZE := 16192k
|
|
TPLINK_HWID := 0x08000001
|
|
IMAGES := sysupgrade.bin
|
|
SUPPORTED_DEVICES += gl-inet
|
|
endef
|
|
TARGET_DEVICES += glinet_6416
|
|
|
|
define Device/glinet_gl-ar150
|
|
SOC := ar9330
|
|
DEVICE_VENDOR := GL.iNet
|
|
DEVICE_MODEL := GL-AR150
|
|
DEVICE_PACKAGES := kmod-usb-chipidea2
|
|
IMAGE_SIZE := 16000k
|
|
SUPPORTED_DEVICES += gl-ar150
|
|
endef
|
|
TARGET_DEVICES += glinet_gl-ar150
|
|
|
|
define Device/glinet_gl-ar300m-common-nor
|
|
SOC := qca9531
|
|
DEVICE_VENDOR := GL.iNet
|
|
DEVICE_PACKAGES := kmod-usb2
|
|
IMAGE_SIZE := 16000k
|
|
SUPPORTED_DEVICES += gl-ar300m
|
|
endef
|
|
|
|
define Device/glinet_gl-ar300m-lite
|
|
$(Device/glinet_gl-ar300m-common-nor)
|
|
DEVICE_MODEL := GL-AR300M
|
|
DEVICE_VARIANT := Lite
|
|
endef
|
|
TARGET_DEVICES += glinet_gl-ar300m-lite
|
|
|
|
define Device/glinet_gl-ar300m16
|
|
$(Device/glinet_gl-ar300m-common-nor)
|
|
DEVICE_MODEL := GL-AR300M16
|
|
endef
|
|
TARGET_DEVICES += glinet_gl-ar300m16
|
|
|
|
define Device/glinet_gl-ar750
|
|
SOC := qca9531
|
|
DEVICE_VENDOR := GL.iNet
|
|
DEVICE_MODEL := GL-AR750
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca9887-ct
|
|
IMAGE_SIZE := 16000k
|
|
SUPPORTED_DEVICES += gl-ar750
|
|
endef
|
|
TARGET_DEVICES += glinet_gl-ar750
|
|
|
|
define Device/glinet_gl-x750
|
|
SOC := qca9531
|
|
DEVICE_VENDOR := GL.iNet
|
|
DEVICE_MODEL := GL-X750
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca9887-ct
|
|
IMAGE_SIZE := 16000k
|
|
endef
|
|
TARGET_DEVICES += glinet_gl-x750
|
|
|
|
define Device/iodata_etg3-r
|
|
SOC := ar9342
|
|
DEVICE_VENDOR := I-O DATA
|
|
DEVICE_MODEL := ETG3-R
|
|
IMAGE_SIZE := 7680k
|
|
DEVICE_PACKAGES := -iwinfo -kmod-ath9k -wpad-basic
|
|
endef
|
|
TARGET_DEVICES += iodata_etg3-r
|
|
|
|
define Device/iodata_wn-ac1167dgr
|
|
SOC := qca9557
|
|
DEVICE_VENDOR := I-O DATA
|
|
DEVICE_MODEL := WN-AC1167DGR
|
|
IMAGE_SIZE := 14656k
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
|
|
append-rootfs | pad-rootfs | check-size | \
|
|
senao-header -r 0x30a -p 0x61 -t 2
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca988x-ct
|
|
endef
|
|
TARGET_DEVICES += iodata_wn-ac1167dgr
|
|
|
|
define Device/iodata_wn-ac1600dgr
|
|
SOC := qca9557
|
|
DEVICE_VENDOR := I-O DATA
|
|
DEVICE_MODEL := WN-AC1600DGR
|
|
IMAGE_SIZE := 14656k
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
|
|
append-rootfs | pad-rootfs | check-size | \
|
|
senao-header -r 0x30a -p 0x60 -t 2 -v 200
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca988x-ct
|
|
endef
|
|
TARGET_DEVICES += iodata_wn-ac1600dgr
|
|
|
|
define Device/iodata_wn-ac1600dgr2
|
|
SOC := qca9557
|
|
DEVICE_VENDOR := I-O DATA
|
|
DEVICE_MODEL := WN-AC1600DGR2/DGR3
|
|
IMAGE_SIZE := 14656k
|
|
IMAGES += dgr2-dgr3-factory.bin
|
|
IMAGE/dgr2-dgr3-factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
|
|
append-rootfs | pad-rootfs | check-size | \
|
|
senao-header -r 0x30a -p 0x60 -t 2 -v 200
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca988x-ct
|
|
endef
|
|
TARGET_DEVICES += iodata_wn-ac1600dgr2
|
|
|
|
define Device/iodata_wn-ag300dgr
|
|
SOC := ar1022
|
|
DEVICE_VENDOR := I-O DATA
|
|
DEVICE_MODEL := WN-AG300DGR
|
|
IMAGE_SIZE := 15424k
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
|
|
append-rootfs | pad-rootfs | check-size | \
|
|
senao-header -r 0x30a -p 0x47 -t 2
|
|
DEVICE_PACKAGES := kmod-usb2
|
|
endef
|
|
TARGET_DEVICES += iodata_wn-ag300dgr
|
|
|
|
define Device/jjplus_ja76pf2
|
|
SOC := ar7161
|
|
DEVICE_VENDOR := jjPlus
|
|
DEVICE_MODEL := JA76PF2
|
|
DEVICE_PACKAGES += -kmod-ath9k -swconfig -wpad-mini -uboot-envtools fconfig
|
|
IMAGES := kernel.bin rootfs.bin
|
|
IMAGE/kernel.bin := append-kernel
|
|
IMAGE/rootfs.bin := append-rootfs | pad-rootfs
|
|
KERNEL := kernel-bin | append-dtb | lzma | pad-to $$(BLOCKSIZE)
|
|
KERNEL_INITRAMFS := kernel-bin | append-dtb
|
|
IMAGE_SIZE := 16000k
|
|
SUPPORTED_DEVICES += ja76pf2
|
|
endef
|
|
TARGET_DEVICES += jjplus_ja76pf2
|
|
|
|
define Device/librerouter_librerouter-v1
|
|
SOC := qca9558
|
|
DEVICE_VENDOR := Librerouter
|
|
DEVICE_MODEL := LibreRouter
|
|
DEVICE_VARIANT := v1
|
|
IMAGE_SIZE := 7936k
|
|
DEVICE_PACKAGES := kmod-usb2
|
|
endef
|
|
TARGET_DEVICES += librerouter_librerouter-v1
|
|
|
|
define Device/nec_wg1200cr
|
|
SOC := qca9563
|
|
DEVICE_VENDOR := NEC
|
|
DEVICE_MODEL := Aterm WG1200CR
|
|
IMAGE_SIZE := 7616k
|
|
SEAMA_MTDBLOCK := 6
|
|
SEAMA_SIGNATURE := wrgac72_necpf.2016gui_wg1200cr
|
|
IMAGES += factory.bin
|
|
IMAGE/default := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | append-rootfs
|
|
IMAGE/sysupgrade.bin := $$(IMAGE/default) | seama | pad-rootfs | \
|
|
append-metadata | check-size
|
|
IMAGE/factory.bin := $$(IMAGE/default) | pad-rootfs -x 64 | seama | \
|
|
seama-seal | nec-enc 9gsiy9nzep452pad | check-size
|
|
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9888-ct
|
|
endef
|
|
TARGET_DEVICES += nec_wg1200cr
|
|
|
|
define Device/nec_wg800hp
|
|
SOC := qca9563
|
|
DEVICE_VENDOR := NEC
|
|
DEVICE_MODEL := Aterm WG800HP
|
|
IMAGE_SIZE := 7104k
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
|
|
append-rootfs | pad-rootfs | check-size | \
|
|
xor-image -p 6A57190601121E4C004C1E1201061957 -x | nec-fw LASER_ATERM
|
|
DEVICE_PACKAGES := kmod-ath10k-ct-smallbuffers ath10k-firmware-qca9887-ct-full-htt
|
|
endef
|
|
TARGET_DEVICES += nec_wg800hp
|
|
|
|
define Device/netgear_ex6400_ex7300
|
|
SOC := qca9558
|
|
NETGEAR_KERNEL_MAGIC := 0x27051956
|
|
NETGEAR_BOARD_ID := EX7300series
|
|
NETGEAR_HW_ID := 29765104+16+0+128
|
|
IMAGE_SIZE := 15552k
|
|
IMAGE/default := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | \
|
|
netgear-rootfs | pad-rootfs
|
|
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca99x0-ct
|
|
$(Device/netgear_ath79)
|
|
endef
|
|
|
|
define Device/netgear_ex6400
|
|
$(Device/netgear_ex6400_ex7300)
|
|
DEVICE_MODEL := EX6400
|
|
endef
|
|
TARGET_DEVICES += netgear_ex6400
|
|
|
|
define Device/netgear_ex7300
|
|
$(Device/netgear_ex6400_ex7300)
|
|
DEVICE_MODEL := EX7300
|
|
endef
|
|
TARGET_DEVICES += netgear_ex7300
|
|
|
|
define Device/netgear_wndr3x00
|
|
SOC := ar7161
|
|
IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | netgear-squashfs | \
|
|
append-rootfs | pad-rootfs
|
|
DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport \
|
|
kmod-leds-reset kmod-owl-loader
|
|
$(Device/netgear_ath79)
|
|
endef
|
|
|
|
define Device/netgear_wndr3700
|
|
$(Device/netgear_wndr3x00)
|
|
DEVICE_MODEL := WNDR3700
|
|
DEVICE_VARIANT := v1
|
|
NETGEAR_KERNEL_MAGIC := 0x33373030
|
|
NETGEAR_BOARD_ID := WNDR3700
|
|
IMAGE_SIZE := 7680k
|
|
IMAGES += factory-NA.img
|
|
IMAGE/factory-NA.img := $$(IMAGE/default) | netgear-dni NA | \
|
|
check-size
|
|
SUPPORTED_DEVICES += wndr3700
|
|
endef
|
|
TARGET_DEVICES += netgear_wndr3700
|
|
|
|
define Device/netgear_wndr3700-v2
|
|
$(Device/netgear_wndr3x00)
|
|
DEVICE_MODEL := WNDR3700
|
|
DEVICE_VARIANT := v2
|
|
NETGEAR_KERNEL_MAGIC := 0x33373031
|
|
NETGEAR_BOARD_ID := WNDR3700v2
|
|
NETGEAR_HW_ID := 29763654+16+64
|
|
IMAGE_SIZE := 15872k
|
|
SUPPORTED_DEVICES += wndr3700 netgear,wndr3700v2
|
|
endef
|
|
TARGET_DEVICES += netgear_wndr3700-v2
|
|
|
|
define Device/netgear_wndr3800
|
|
$(Device/netgear_wndr3x00)
|
|
DEVICE_MODEL := WNDR3800
|
|
NETGEAR_KERNEL_MAGIC := 0x33373031
|
|
NETGEAR_BOARD_ID := WNDR3800
|
|
NETGEAR_HW_ID := 29763654+16+128
|
|
IMAGE_SIZE := 15872k
|
|
SUPPORTED_DEVICES += wndr3700
|
|
endef
|
|
TARGET_DEVICES += netgear_wndr3800
|
|
|
|
define Device/netgear_wndr3800ch
|
|
$(Device/netgear_wndr3x00)
|
|
DEVICE_MODEL := WNDR3800CH
|
|
NETGEAR_KERNEL_MAGIC := 0x33373031
|
|
NETGEAR_BOARD_ID := WNDR3800CH
|
|
NETGEAR_HW_ID := 29763654+16+128
|
|
IMAGE_SIZE := 15872k
|
|
SUPPORTED_DEVICES += wndr3700
|
|
endef
|
|
TARGET_DEVICES += netgear_wndr3800ch
|
|
|
|
define Device/netgear_wnr2200_common
|
|
SOC := ar7241
|
|
DEVICE_MODEL := WNR2200
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
|
|
NETGEAR_KERNEL_MAGIC := 0x32323030
|
|
NETGEAR_BOARD_ID := wnr2200
|
|
IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | netgear-squashfs | \
|
|
append-rootfs | pad-rootfs
|
|
$(Device/netgear_ath79)
|
|
endef
|
|
|
|
define Device/netgear_wnr2200-8m
|
|
$(Device/netgear_wnr2200_common)
|
|
DEVICE_VARIANT := 8M
|
|
NETGEAR_HW_ID := 29763600+08+64
|
|
IMAGE_SIZE := 7808k
|
|
IMAGES += factory-NA.img
|
|
IMAGE/factory-NA.img := $$(IMAGE/default) | netgear-dni NA | \
|
|
check-size
|
|
SUPPORTED_DEVICES += wnr2200
|
|
endef
|
|
TARGET_DEVICES += netgear_wnr2200-8m
|
|
|
|
define Device/netgear_wnr2200-16m
|
|
$(Device/netgear_wnr2200_common)
|
|
DEVICE_VARIANT := 16M
|
|
DEVICE_ALT0_VENDOR := NETGEAR
|
|
DEVICE_ALT0_MODEL := WNR2200
|
|
DEVICE_ALT0_VARIANT := CN/RU
|
|
NETGEAR_HW_ID :=
|
|
IMAGE_SIZE := 16000k
|
|
endef
|
|
TARGET_DEVICES += netgear_wnr2200-16m
|
|
|
|
define Device/ocedo_koala
|
|
SOC := qca9558
|
|
DEVICE_VENDOR := Ocedo
|
|
DEVICE_MODEL := Koala
|
|
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
|
|
SUPPORTED_DEVICES += koala
|
|
IMAGE_SIZE := 7424k
|
|
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \
|
|
append-metadata | check-size
|
|
endef
|
|
TARGET_DEVICES += ocedo_koala
|
|
|
|
define Device/ocedo_raccoon
|
|
SOC := ar9344
|
|
DEVICE_VENDOR := Ocedo
|
|
DEVICE_MODEL := Raccoon
|
|
IMAGE_SIZE := 7424k
|
|
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \
|
|
append-metadata | check-size
|
|
endef
|
|
TARGET_DEVICES += ocedo_raccoon
|
|
|
|
define Device/ocedo_ursus
|
|
SOC := qca9558
|
|
DEVICE_VENDOR := Ocedo
|
|
DEVICE_MODEL := Ursus
|
|
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
|
|
IMAGE_SIZE := 7424k
|
|
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \
|
|
append-metadata | check-size
|
|
endef
|
|
TARGET_DEVICES += ocedo_ursus
|
|
|
|
define Device/openmesh_om5p-ac-v2
|
|
SOC := qca9558
|
|
DEVICE_VENDOR := OpenMesh
|
|
DEVICE_MODEL := OM5P-AC
|
|
DEVICE_VARIANT := v2
|
|
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct om-watchdog
|
|
IMAGE_SIZE := 7808k
|
|
SUPPORTED_DEVICES += om5p-acv2
|
|
endef
|
|
TARGET_DEVICES += openmesh_om5p-ac-v2
|
|
|
|
define Device/pcs_cap324
|
|
SOC := ar9344
|
|
DEVICE_VENDOR := PowerCloud Systems
|
|
DEVICE_MODEL := CAP324
|
|
IMAGE_SIZE := 16000k
|
|
SUPPORTED_DEVICES += cap324
|
|
endef
|
|
TARGET_DEVICES += pcs_cap324
|
|
|
|
define Device/pcs_cr3000
|
|
SOC := ar9341
|
|
DEVICE_VENDOR := PowerCloud Systems
|
|
DEVICE_MODEL := CR3000
|
|
IMAGE_SIZE := 7808k
|
|
SUPPORTED_DEVICES += cr3000
|
|
endef
|
|
TARGET_DEVICES += pcs_cr3000
|
|
|
|
define Device/pcs_cr5000
|
|
SOC := ar9344
|
|
DEVICE_VENDOR := PowerCloud Systems
|
|
DEVICE_MODEL := CR5000
|
|
DEVICE_PACKAGES := kmod-usb2
|
|
IMAGE_SIZE := 7808k
|
|
SUPPORTED_DEVICES += cr5000
|
|
endef
|
|
TARGET_DEVICES += pcs_cr5000
|
|
|
|
define Device/phicomm_k2t
|
|
SOC := qca9563
|
|
DEVICE_VENDOR := Phicomm
|
|
DEVICE_MODEL := K2T
|
|
IMAGE_SIZE := 15744k
|
|
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \
|
|
append-metadata | check-size
|
|
DEVICE_PACKAGES := kmod-leds-reset kmod-ath10k-ct-smallbuffers ath10k-firmware-qca9888-ct
|
|
endef
|
|
TARGET_DEVICES += phicomm_k2t
|
|
|
|
define Device/pisen_ts-d084
|
|
$(Device/tplink-8mlzma)
|
|
SOC := ar9331
|
|
DEVICE_VENDOR := PISEN
|
|
DEVICE_MODEL := TS-D084
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-chipidea2
|
|
TPLINK_HWID := 0x07030101
|
|
endef
|
|
TARGET_DEVICES += pisen_ts-d084
|
|
|
|
define Device/pisen_wmb001n
|
|
SOC := ar9341
|
|
DEVICE_VENDOR := PISEN
|
|
DEVICE_MODEL := WMB001N
|
|
IMAGE_SIZE := 14080k
|
|
DEVICE_PACKAGES := kmod-i2c-gpio kmod-usb2
|
|
LOADER_TYPE := bin
|
|
LOADER_FLASH_OFFS := 0x20000
|
|
COMPILE := loader-$(1).bin loader-$(1).uImage
|
|
COMPILE/loader-$(1).bin := loader-okli-compile
|
|
COMPILE/loader-$(1).uImage := append-loader-okli $(1) | pad-to 64k | lzma | \
|
|
uImage lzma
|
|
KERNEL := kernel-bin | append-dtb | lzma | uImage lzma -M 0x4f4b4c49
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | pisen_wmb001n-factory $(1)
|
|
endef
|
|
TARGET_DEVICES += pisen_wmb001n
|
|
|
|
define Device/pisen_wmm003n
|
|
$(Device/tplink-8mlzma)
|
|
SOC := ar9331
|
|
DEVICE_VENDOR := PISEN
|
|
DEVICE_MODEL := Cloud Easy Power (WMM003N)
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-chipidea2
|
|
TPLINK_HWID := 0x07030101
|
|
endef
|
|
TARGET_DEVICES += pisen_wmm003n
|
|
|
|
define Device/qihoo_c301
|
|
$(Device/seama)
|
|
SOC := ar9344
|
|
DEVICE_VENDOR := Qihoo
|
|
DEVICE_MODEL := C301
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca988x-ct \
|
|
uboot-envtools
|
|
IMAGE_SIZE := 15744k
|
|
SEAMA_SIGNATURE := wrgac26_qihoo360_360rg
|
|
SUPPORTED_DEVICES += qihoo-c301
|
|
endef
|
|
TARGET_DEVICES += qihoo_c301
|
|
|
|
define Device/rosinson_wr818
|
|
SOC := qca9563
|
|
DEVICE_VENDOR := Rosinson
|
|
DEVICE_MODEL := WR818
|
|
IMAGE_SIZE := 15872k
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
|
|
endef
|
|
TARGET_DEVICES += rosinson_wr818
|
|
|
|
define Device/siemens_ws-ap3610
|
|
SOC := ar7161
|
|
DEVICE_VENDOR := Siemens
|
|
DEVICE_MODEL := WS-AP3610
|
|
IMAGE_SIZE := 14336k
|
|
BLOCKSIZE := 256k
|
|
LOADER_TYPE := bin
|
|
LOADER_FLASH_OFFS := 0x82000
|
|
COMPILE := loader-$(1).bin
|
|
COMPILE/loader-$(1).bin := loader-okli-compile
|
|
KERNEL := kernel-bin | append-dtb | lzma | uImage lzma -M 0x4f4b4c49 | loader-okli $(1) 8128 | uImage none
|
|
KERNEL_INITRAMFS := kernel-bin | append-dtb | uImage none
|
|
endef
|
|
TARGET_DEVICES += siemens_ws-ap3610
|
|
|
|
define Device/sitecom_wlr-7100
|
|
SOC := ar1022
|
|
DEVICE_VENDOR := Sitecom
|
|
DEVICE_MODEL := WLR-7100
|
|
DEVICE_VARIANT := v1 002
|
|
DEVICE_PACKAGES := ath10k-firmware-qca988x-ct kmod-ath10k-ct-smallbuffers kmod-usb2
|
|
IMAGES += factory.dlf
|
|
IMAGE/factory.dlf := append-kernel | pad-to $$$$(BLOCKSIZE) | \
|
|
append-rootfs | pad-rootfs | check-size | \
|
|
senao-header -r 0x222 -p 0x53 -t 2
|
|
IMAGE_SIZE := 7488k
|
|
endef
|
|
TARGET_DEVICES += sitecom_wlr-7100
|
|
|
|
define Device/sitecom_wlr-8100
|
|
SOC := qca9558
|
|
DEVICE_VENDOR := Sitecom
|
|
DEVICE_MODEL := WLR-8100
|
|
DEVICE_ALT0_VENDOR := Sitecom
|
|
DEVICE_ALT0_MODEL := X8 AC1750
|
|
DEVICE_PACKAGES := ath10k-firmware-qca988x-ct kmod-ath10k-ct kmod-usb2 kmod-usb3
|
|
SUPPORTED_DEVICES += wlr8100
|
|
IMAGES += factory.dlf
|
|
IMAGE/factory.dlf := append-kernel | pad-to $$$$(BLOCKSIZE) | \
|
|
append-rootfs | pad-rootfs | check-size | \
|
|
senao-header -r 0x222 -p 0x56 -t 2
|
|
IMAGE_SIZE := 15424k
|
|
endef
|
|
TARGET_DEVICES += sitecom_wlr-8100
|
|
|
|
define Device/teltonika_rut955
|
|
SOC := ar9344
|
|
DEVICE_VENDOR := Teltonika
|
|
DEVICE_MODEL := RUT955
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-acm kmod-usb-net-qmi-wwan \
|
|
kmod-usb-serial-option kmod-hwmon-mcp3021 uqmi -uboot-envtools
|
|
IMAGE_SIZE := 15552k
|
|
TPLINK_HWID := 0x35000001
|
|
TPLINK_HWREV := 0x1
|
|
TPLINK_HEADER_VERSION := 1
|
|
KERNEL := kernel-bin | append-dtb | lzma | tplink-v1-header
|
|
KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | uImage lzma
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs |\
|
|
pad-rootfs | teltonika-fw-fake-checksum | append-string master |\
|
|
append-md5sum-bin | check-size
|
|
IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) |\
|
|
append-rootfs | pad-rootfs | append-metadata |\
|
|
check-size
|
|
endef
|
|
TARGET_DEVICES += teltonika_rut955
|
|
|
|
define Device/teltonika_rut955-h7v3c0
|
|
$(Device/teltonika_rut955)
|
|
DEVICE_VARIANT := H7V3C0
|
|
endef
|
|
TARGET_DEVICES += teltonika_rut955-h7v3c0
|
|
|
|
define Device/trendnet_tew-823dru
|
|
SOC := qca9558
|
|
DEVICE_VENDOR := Trendnet
|
|
DEVICE_MODEL := TEW-823DRU
|
|
DEVICE_VARIANT := v1.0R
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca988x-ct
|
|
SUPPORTED_DEVICES += tew-823dru
|
|
IMAGE_SIZE := 15296k
|
|
IMAGES := factory.bin sysupgrade.bin
|
|
IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | \
|
|
pad-rootfs
|
|
IMAGE/factory.bin := $$(IMAGE/default) | pad-offset $$$$(IMAGE_SIZE) 26 | \
|
|
append-string 00AP135AR9558-RT-131129-00 | check-size
|
|
IMAGE/sysupgrade.bin := $$(IMAGE/default) | append-metadata | \
|
|
check-size
|
|
endef
|
|
TARGET_DEVICES += trendnet_tew-823dru
|
|
|
|
define Device/wd_mynet-n750
|
|
$(Device/seama)
|
|
SOC := ar9344
|
|
DEVICE_VENDOR := Western Digital
|
|
DEVICE_MODEL := My Net N750
|
|
IMAGE_SIZE := 15872k
|
|
DEVICE_PACKAGES := kmod-usb2
|
|
SEAMA_SIGNATURE := wrgnd13_wd_av
|
|
SUPPORTED_DEVICES += mynet-n750
|
|
endef
|
|
TARGET_DEVICES += wd_mynet-n750
|
|
|
|
define Device/wd_mynet-wifi-rangeextender
|
|
SOC := ar9344
|
|
DEVICE_VENDOR := Western Digital
|
|
DEVICE_MODEL := My Net Wi-Fi Range Extender
|
|
DEVICE_PACKAGES := rssileds nvram -swconfig
|
|
IMAGE_SIZE := 7808k
|
|
ADDPATTERN_ID := mynet-rext
|
|
ADDPATTERN_VERSION := 1.00.01
|
|
IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | cybertan-trx | \
|
|
addpattern | append-metadata
|
|
SUPPORTED_DEVICES += mynet-rext
|
|
endef
|
|
TARGET_DEVICES += wd_mynet-wifi-rangeextender
|
|
|
|
define Device/winchannel_wb2000
|
|
SOC := ar9344
|
|
DEVICE_VENDOR := Winchannel
|
|
DEVICE_MODEL := WB2000
|
|
IMAGE_SIZE := 15872k
|
|
DEVICE_PACKAGES := kmod-i2c-gpio kmod-rtc-ds1307 kmod-usb2 \
|
|
kmod-usb-ledtrig-usbport
|
|
endef
|
|
TARGET_DEVICES += winchannel_wb2000
|
|
|
|
define Device/xiaomi_mi-router-4q
|
|
SOC := qca9561
|
|
DEVICE_VENDOR := Xiaomi
|
|
DEVICE_MODEL := Mi Router 4Q
|
|
IMAGE_SIZE := 14336k
|
|
endef
|
|
TARGET_DEVICES += xiaomi_mi-router-4q
|
|
|
|
define Device/yuncore_a770
|
|
SOC := qca9531
|
|
DEVICE_VENDOR := YunCore
|
|
DEVICE_MODEL := A770
|
|
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9887-ct
|
|
IMAGE_SIZE := 16000k
|
|
IMAGES += tftp.bin
|
|
IMAGE/tftp.bin := $$(IMAGE/sysupgrade.bin) | yuncore-tftp-header-16m
|
|
endef
|
|
TARGET_DEVICES += yuncore_a770
|
|
|
|
define Device/yuncore_a782
|
|
SOC := qca9563
|
|
DEVICE_VENDOR := YunCore
|
|
DEVICE_MODEL := A782
|
|
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9888-ct
|
|
IMAGE_SIZE := 16000k
|
|
IMAGES += tftp.bin
|
|
IMAGE/tftp.bin := $$(IMAGE/sysupgrade.bin) | yuncore-tftp-header-16m
|
|
endef
|
|
TARGET_DEVICES += yuncore_a782
|
|
|
|
define Device/yuncore_xd4200
|
|
SOC := qca9563
|
|
DEVICE_VENDOR := YunCore
|
|
DEVICE_MODEL := XD4200
|
|
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9888-ct
|
|
IMAGE_SIZE := 16000k
|
|
IMAGES += tftp.bin
|
|
IMAGE/tftp.bin := $$(IMAGE/sysupgrade.bin) | yuncore-tftp-header-16m
|
|
endef
|
|
TARGET_DEVICES += yuncore_xd4200
|
|
|
|
define Device/zbtlink_zbt-wd323
|
|
SOC := ar9344
|
|
DEVICE_VENDOR := ZBT
|
|
DEVICE_MODEL := WD323
|
|
IMAGE_SIZE := 16000k
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-i2c-gpio kmod-rtc-pcf8563 \
|
|
kmod-usb-serial kmod-usb-serial-cp210x uqmi
|
|
endef
|
|
TARGET_DEVICES += zbtlink_zbt-wd323
|