mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-23 15:32:33 +00:00
f5919b65d4
Patch generation process: - rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable - git format-patch v4.14.89 Patches skipped during rebase: - lan78xx: Read MAC address from DT if present - lan78xx: Enable LEDs and auto-negotiation - Revert "softirq: Let ksoftirqd do its job" - sc16is7xx: Fix for multi-channel stall - lan78xx: Ignore DT MAC address if already valid - lan78xx: Simple patch to prevent some crashes - tcp_write_queue_purge clears all the SKBs in the write queue - Revert "lan78xx: Simple patch to prevent some crashes" - lan78xx: Connect phy early - Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro - Revert "Revert "softirq: Let ksoftirqd do its job"" - ASoC: cs4265: SOC_SINGLE register value error fix - Revert "ASoC: cs4265: SOC_SINGLE register value error fix" - Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends" - Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"" Patches dropped after rebase: - net: Add non-mainline source for rtl8192cu wlan - net: Fix rtl8192cu build errors on other platforms - brcm: adds support for BCM43341 wifi - brcmfmac: Mute expected startup 'errors' - ARM64: Fix build break for RTL8187/RTL8192CU wifi - ARM64: Enable RTL8187/RTL8192CU wifi in build config - This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator - brcmfmac: add CLM download support - brcmfmac: request_firmware_direct is quieter - Sets the BCDC priority to constant 0 - brcmfmac: Disable ARP offloading when promiscuous - brcmfmac: Avoid possible out-of-bounds read - brcmfmac: Delete redundant length check - net: rtl8192cu: Normalize indentation - net: rtl8192cu: Fix implicit fallthrough warnings - Revert "Sets the BCDC priority to constant 0" - media: cxd2880: Bump to match 4.18.y version - media: cxd2880-spi: Bump to match 4.18.y version - Revert "mm: alloc_contig: re-allow CMA to compact FS pages" - Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages"" - cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with MEDIA_SUBDRV_AUTOSELECT - 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch - 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch Make I2C built-in instead of modular as in upstream defconfig; also the easiest way to get MFD_ARIZONA enabled, which is required by kmod-sound-soc-rpi-cirrus. Add missing compatible strings from 4.9/960-add-rasbperrypi-compatible.patch, using upstream names for compute modules. Add extra patch to enable the LEDs on lan78xx. Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y) Runtime-tested: bcm2708, bcm2710 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
48 lines
1.7 KiB
Diff
48 lines
1.7 KiB
Diff
From 61ad2796b48891e5a3e52d290cb51a44259b5799 Mon Sep 17 00:00:00 2001
|
|
From: hdoverobinson <hdoverobinson@gmail.com>
|
|
Date: Tue, 13 Mar 2018 06:58:39 -0400
|
|
Subject: [PATCH 247/454] added capture_clear option to pps-gpio via dtoverlay
|
|
(#2433)
|
|
|
|
---
|
|
arch/arm/boot/dts/overlays/README | 5 ++++-
|
|
arch/arm/boot/dts/overlays/pps-gpio-overlay.dts | 1 +
|
|
drivers/pps/clients/pps-gpio.c | 3 +++
|
|
3 files changed, 8 insertions(+), 1 deletion(-)
|
|
|
|
--- a/arch/arm/boot/dts/overlays/README
|
|
+++ b/arch/arm/boot/dts/overlays/README
|
|
@@ -1287,7 +1287,10 @@ Info: Configures the pps-gpio (pulse-p
|
|
Load: dtoverlay=pps-gpio,<param>=<val>
|
|
Params: gpiopin Input GPIO (default "18")
|
|
assert_falling_edge When present, assert is indicated by a falling
|
|
- edge, rather than by a rising edge
|
|
+ edge, rather than by a rising edge (default
|
|
+ off)
|
|
+ capture_clear Generate clear events on the trailing edge
|
|
+ (default off)
|
|
|
|
|
|
Name: pwm
|
|
--- a/arch/arm/boot/dts/overlays/pps-gpio-overlay.dts
|
|
+++ b/arch/arm/boot/dts/overlays/pps-gpio-overlay.dts
|
|
@@ -33,5 +33,6 @@
|
|
<&pps_pins>,"brcm,pins:0",
|
|
<&pps_pins>,"reg:0";
|
|
assert_falling_edge = <&pps>,"assert-falling-edge?";
|
|
+ capture_clear = <&pps>,"capture-clear?";
|
|
};
|
|
};
|
|
--- a/drivers/pps/clients/pps-gpio.c
|
|
+++ b/drivers/pps/clients/pps-gpio.c
|
|
@@ -119,6 +119,9 @@ static int pps_gpio_probe(struct platfor
|
|
|
|
if (of_get_property(np, "assert-falling-edge", NULL))
|
|
data->assert_falling_edge = true;
|
|
+
|
|
+ if (of_get_property(np, "capture-clear", NULL))
|
|
+ data->capture_clear = true;
|
|
}
|
|
|
|
/* GPIO setup */
|