mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-23 15:32:33 +00:00
f5919b65d4
Patch generation process: - rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable - git format-patch v4.14.89 Patches skipped during rebase: - lan78xx: Read MAC address from DT if present - lan78xx: Enable LEDs and auto-negotiation - Revert "softirq: Let ksoftirqd do its job" - sc16is7xx: Fix for multi-channel stall - lan78xx: Ignore DT MAC address if already valid - lan78xx: Simple patch to prevent some crashes - tcp_write_queue_purge clears all the SKBs in the write queue - Revert "lan78xx: Simple patch to prevent some crashes" - lan78xx: Connect phy early - Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro - Revert "Revert "softirq: Let ksoftirqd do its job"" - ASoC: cs4265: SOC_SINGLE register value error fix - Revert "ASoC: cs4265: SOC_SINGLE register value error fix" - Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends" - Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"" Patches dropped after rebase: - net: Add non-mainline source for rtl8192cu wlan - net: Fix rtl8192cu build errors on other platforms - brcm: adds support for BCM43341 wifi - brcmfmac: Mute expected startup 'errors' - ARM64: Fix build break for RTL8187/RTL8192CU wifi - ARM64: Enable RTL8187/RTL8192CU wifi in build config - This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator - brcmfmac: add CLM download support - brcmfmac: request_firmware_direct is quieter - Sets the BCDC priority to constant 0 - brcmfmac: Disable ARP offloading when promiscuous - brcmfmac: Avoid possible out-of-bounds read - brcmfmac: Delete redundant length check - net: rtl8192cu: Normalize indentation - net: rtl8192cu: Fix implicit fallthrough warnings - Revert "Sets the BCDC priority to constant 0" - media: cxd2880: Bump to match 4.18.y version - media: cxd2880-spi: Bump to match 4.18.y version - Revert "mm: alloc_contig: re-allow CMA to compact FS pages" - Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages"" - cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with MEDIA_SUBDRV_AUTOSELECT - 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch - 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch Make I2C built-in instead of modular as in upstream defconfig; also the easiest way to get MFD_ARIZONA enabled, which is required by kmod-sound-soc-rpi-cirrus. Add missing compatible strings from 4.9/960-add-rasbperrypi-compatible.patch, using upstream names for compute modules. Add extra patch to enable the LEDs on lan78xx. Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y) Runtime-tested: bcm2708, bcm2710 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
340 lines
10 KiB
Diff
340 lines
10 KiB
Diff
From 50e9c65f5062bba726f94374127ea89f78102aa3 Mon Sep 17 00:00:00 2001
|
|
From: Phil Elwell <phil@raspberrypi.org>
|
|
Date: Wed, 28 Feb 2018 22:28:14 +0000
|
|
Subject: [PATCH 236/454] Removing (broken) RaspiDac3 support...
|
|
|
|
...at the request of the author.
|
|
|
|
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
|
|
---
|
|
arch/arm/boot/dts/overlays/Makefile | 1 -
|
|
arch/arm/boot/dts/overlays/README | 6 -
|
|
.../boot/dts/overlays/raspidac3-overlay.dts | 49 -----
|
|
arch/arm/configs/bcm2709_defconfig | 1 -
|
|
arch/arm/configs/bcmrpi_defconfig | 1 -
|
|
arch/arm64/configs/bcmrpi3_defconfig | 1 -
|
|
sound/soc/bcm/Kconfig | 8 -
|
|
sound/soc/bcm/Makefile | 2 -
|
|
sound/soc/bcm/raspidac3.c | 172 ------------------
|
|
9 files changed, 241 deletions(-)
|
|
delete mode 100644 arch/arm/boot/dts/overlays/raspidac3-overlay.dts
|
|
delete mode 100644 sound/soc/bcm/raspidac3.c
|
|
|
|
--- a/arch/arm/boot/dts/overlays/Makefile
|
|
+++ b/arch/arm/boot/dts/overlays/Makefile
|
|
@@ -89,7 +89,6 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
|
|
pwm-2chan.dtbo \
|
|
pwm-ir-tx.dtbo \
|
|
qca7000.dtbo \
|
|
- raspidac3.dtbo \
|
|
rotary-encoder.dtbo \
|
|
rpi-backlight.dtbo \
|
|
rpi-cirrus-wm5102.dtbo \
|
|
--- a/arch/arm/boot/dts/overlays/README
|
|
+++ b/arch/arm/boot/dts/overlays/README
|
|
@@ -1350,12 +1350,6 @@ Params: int_pin GPIO pin
|
|
speed SPI bus speed (default 12 MHz)
|
|
|
|
|
|
-Name: raspidac3
|
|
-Info: Configures the RaspiDAV Rev.3x audio card
|
|
-Load: dtoverlay=raspidac3
|
|
-Params: <None>
|
|
-
|
|
-
|
|
Name: rotary-encoder
|
|
Info: Overlay for GPIO connected rotary encoder.
|
|
Load: dtoverlay=rotary-encoder,<param>=<val>
|
|
--- a/arch/arm/boot/dts/overlays/raspidac3-overlay.dts
|
|
+++ /dev/null
|
|
@@ -1,49 +0,0 @@
|
|
-// Definitions for RaspiDACv3
|
|
-/dts-v1/;
|
|
-/plugin/;
|
|
-
|
|
-/ {
|
|
- compatible = "brcm,bcm2708";
|
|
-
|
|
- fragment@0 {
|
|
- target = <&i2s>;
|
|
- __overlay__ {
|
|
- status = "okay";
|
|
- };
|
|
- };
|
|
-
|
|
- fragment@1 {
|
|
- target = <&i2c1>;
|
|
- __overlay__ {
|
|
- #address-cells = <1>;
|
|
- #size-cells = <0>;
|
|
- status = "okay";
|
|
-
|
|
- pcm5122@4c {
|
|
- #sound-dai-cells = <0>;
|
|
- compatible = "ti,pcm5122";
|
|
- reg = <0x4c>;
|
|
- AVDD-supply = <&vdd_3v3_reg>;
|
|
- DVDD-supply = <&vdd_3v3_reg>;
|
|
- CPVDD-supply = <&vdd_3v3_reg>;
|
|
- status = "okay";
|
|
- };
|
|
-
|
|
- tpa6130a2: tpa6130a2@60 {
|
|
- compatible = "ti,tpa6130a2";
|
|
- reg = <0x60>;
|
|
- Vdd-supply = <&vdd_3v3_reg>;
|
|
- status = "okay";
|
|
- };
|
|
- };
|
|
- };
|
|
-
|
|
- fragment@2 {
|
|
- target = <&sound>;
|
|
- __overlay__ {
|
|
- compatible = "jg,raspidacv3";
|
|
- i2s-controller = <&i2s>;
|
|
- status = "okay";
|
|
- };
|
|
- };
|
|
-};
|
|
--- a/arch/arm/configs/bcm2709_defconfig
|
|
+++ b/arch/arm/configs/bcm2709_defconfig
|
|
@@ -879,7 +879,6 @@ CONFIG_SND_BCM2708_SOC_JUSTBOOM_DAC=m
|
|
CONFIG_SND_BCM2708_SOC_JUSTBOOM_DIGI=m
|
|
CONFIG_SND_BCM2708_SOC_IQAUDIO_DAC=m
|
|
CONFIG_SND_BCM2708_SOC_IQAUDIO_DIGI=m
|
|
-CONFIG_SND_BCM2708_SOC_RASPIDAC3=m
|
|
CONFIG_SND_BCM2708_SOC_ADAU1977_ADC=m
|
|
CONFIG_SND_AUDIOINJECTOR_PI_SOUNDCARD=m
|
|
CONFIG_SND_AUDIOINJECTOR_OCTO_SOUNDCARD=m
|
|
--- a/arch/arm/configs/bcmrpi_defconfig
|
|
+++ b/arch/arm/configs/bcmrpi_defconfig
|
|
@@ -872,7 +872,6 @@ CONFIG_SND_BCM2708_SOC_JUSTBOOM_DAC=m
|
|
CONFIG_SND_BCM2708_SOC_JUSTBOOM_DIGI=m
|
|
CONFIG_SND_BCM2708_SOC_IQAUDIO_DAC=m
|
|
CONFIG_SND_BCM2708_SOC_IQAUDIO_DIGI=m
|
|
-CONFIG_SND_BCM2708_SOC_RASPIDAC3=m
|
|
CONFIG_SND_BCM2708_SOC_ADAU1977_ADC=m
|
|
CONFIG_SND_AUDIOINJECTOR_PI_SOUNDCARD=m
|
|
CONFIG_SND_AUDIOINJECTOR_OCTO_SOUNDCARD=m
|
|
--- a/arch/arm64/configs/bcmrpi3_defconfig
|
|
+++ b/arch/arm64/configs/bcmrpi3_defconfig
|
|
@@ -861,7 +861,6 @@ CONFIG_SND_BCM2708_SOC_JUSTBOOM_DAC=m
|
|
CONFIG_SND_BCM2708_SOC_JUSTBOOM_DIGI=m
|
|
CONFIG_SND_BCM2708_SOC_IQAUDIO_DAC=m
|
|
CONFIG_SND_BCM2708_SOC_IQAUDIO_DIGI=m
|
|
-CONFIG_SND_BCM2708_SOC_RASPIDAC3=m
|
|
CONFIG_SND_BCM2708_SOC_ADAU1977_ADC=m
|
|
CONFIG_SND_AUDIOINJECTOR_PI_SOUNDCARD=m
|
|
CONFIG_SND_DIGIDAC1_SOUNDCARD=m
|
|
--- a/sound/soc/bcm/Kconfig
|
|
+++ b/sound/soc/bcm/Kconfig
|
|
@@ -104,14 +104,6 @@ config SND_BCM2708_SOC_IQAUDIO_DIGI
|
|
help
|
|
Say Y or M if you want to add support for IQAudIO Digital IO board.
|
|
|
|
-config SND_BCM2708_SOC_RASPIDAC3
|
|
- tristate "Support for RaspiDAC Rev.3x"
|
|
- depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S
|
|
- select SND_SOC_PCM512x_I2C
|
|
- select SND_SOC_TPA6130A2
|
|
- help
|
|
- Say Y or M if you want to add support for RaspiDAC Rev.3x.
|
|
-
|
|
config SND_BCM2708_SOC_ADAU1977_ADC
|
|
tristate "Support for ADAU1977 ADC"
|
|
depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S
|
|
--- a/sound/soc/bcm/Makefile
|
|
+++ b/sound/soc/bcm/Makefile
|
|
@@ -25,7 +25,6 @@ snd-soc-rpi-dac-objs := rpi-dac.o
|
|
snd-soc-rpi-proto-objs := rpi-proto.o
|
|
snd-soc-iqaudio-dac-objs := iqaudio-dac.o
|
|
snd-soc-iqaudio-digi-objs := iqaudio_digi.o
|
|
-snd-soc-raspidac3-objs := raspidac3.o
|
|
snd-soc-audioinjector-pi-soundcard-objs := audioinjector-pi-soundcard.o
|
|
snd-soc-audioinjector-octo-soundcard-objs := audioinjector-octo-soundcard.o
|
|
snd-soc-digidac1-soundcard-objs := digidac1-soundcard.o
|
|
@@ -52,7 +51,6 @@ obj-$(CONFIG_SND_BCM2708_SOC_RPI_DAC) +=
|
|
obj-$(CONFIG_SND_BCM2708_SOC_RPI_PROTO) += snd-soc-rpi-proto.o
|
|
obj-$(CONFIG_SND_BCM2708_SOC_IQAUDIO_DAC) += snd-soc-iqaudio-dac.o
|
|
obj-$(CONFIG_SND_BCM2708_SOC_IQAUDIO_DIGI) += snd-soc-iqaudio-digi.o
|
|
-obj-$(CONFIG_SND_BCM2708_SOC_RASPIDAC3) += snd-soc-raspidac3.o
|
|
obj-$(CONFIG_SND_AUDIOINJECTOR_PI_SOUNDCARD) += snd-soc-audioinjector-pi-soundcard.o
|
|
obj-$(CONFIG_SND_AUDIOINJECTOR_OCTO_SOUNDCARD) += snd-soc-audioinjector-octo-soundcard.o
|
|
obj-$(CONFIG_SND_DIGIDAC1_SOUNDCARD) += snd-soc-digidac1-soundcard.o
|
|
--- a/sound/soc/bcm/raspidac3.c
|
|
+++ /dev/null
|
|
@@ -1,172 +0,0 @@
|
|
-/*
|
|
- * ASoC Driver for RaspiDAC v3
|
|
- *
|
|
- * Author: Jan Grulich <jan@grulich.eu>
|
|
- * Copyright 2015
|
|
- * based on code by Daniel Matuschek <daniel@hifiberry.com>
|
|
- * based on code by Florian Meier <florian.meier@koalo.de>
|
|
- *
|
|
- * This program is free software; you can redistribute it and/or
|
|
- * modify it under the terms of the GNU General Public License
|
|
- * version 2 as published by the Free Software Foundation.
|
|
- *
|
|
- * This program is distributed in the hope that it will be useful, but
|
|
- * WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
- * General Public License for more details.
|
|
- */
|
|
-
|
|
-#include <linux/module.h>
|
|
-#include <linux/platform_device.h>
|
|
-
|
|
-#include <sound/core.h>
|
|
-#include <sound/pcm.h>
|
|
-#include <sound/pcm_params.h>
|
|
-#include <sound/soc.h>
|
|
-#include <sound/jack.h>
|
|
-#include <sound/soc-dapm.h>
|
|
-
|
|
-#include "../codecs/pcm512x.h"
|
|
-#include "../codecs/tpa6130a2.h"
|
|
-
|
|
-/* sound card init */
|
|
-static int snd_rpi_raspidac3_init(struct snd_soc_pcm_runtime *rtd)
|
|
-{
|
|
- int ret;
|
|
- struct snd_soc_card *card = rtd->card;
|
|
- struct snd_soc_codec *codec = rtd->codec;
|
|
- snd_soc_update_bits(codec, PCM512x_GPIO_EN, 0x08, 0x08);
|
|
- snd_soc_update_bits(codec, PCM512x_GPIO_OUTPUT_4, 0xf, 0x02);
|
|
- snd_soc_update_bits(codec, PCM512x_GPIO_CONTROL_1, 0x08,0x00);
|
|
-
|
|
- ret = snd_soc_limit_volume(card, "Digital Playback Volume", 207);
|
|
- if (ret < 0)
|
|
- dev_warn(card->dev, "Failed to set volume limit: %d\n", ret);
|
|
- else {
|
|
- struct snd_kcontrol *kctl;
|
|
-
|
|
- ret = snd_soc_limit_volume(card,
|
|
- "TPA6130A2 Headphone Playback Volume",
|
|
- 54);
|
|
- if (ret < 0)
|
|
- dev_warn(card->dev, "Failed to set TPA6130A2 volume limit: %d\n",
|
|
- ret);
|
|
- kctl = snd_soc_card_get_kcontrol(card,
|
|
- "TPA6130A2 Headphone Playback Volume");
|
|
- if (kctl) {
|
|
- strcpy(kctl->id.name, "Headphones Playback Volume");
|
|
- /* disable the volume dB scale so alsamixer works */
|
|
- kctl->vd[0].access = SNDRV_CTL_ELEM_ACCESS_READWRITE;
|
|
- }
|
|
-
|
|
- kctl = snd_soc_card_get_kcontrol(card,
|
|
- "TPA6130A2 Headphone Playback Switch");
|
|
- if (kctl)
|
|
- strcpy(kctl->id.name, "Headphones Playback Switch");
|
|
- }
|
|
-
|
|
- return 0;
|
|
-}
|
|
-
|
|
-/* startup */
|
|
-static int snd_rpi_raspidac3_startup(struct snd_pcm_substream *substream) {
|
|
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
|
|
- struct snd_soc_codec *codec = rtd->codec;
|
|
- snd_soc_update_bits(codec, PCM512x_GPIO_CONTROL_1, 0x08,0x08);
|
|
- return 0;
|
|
-}
|
|
-
|
|
-/* shutdown */
|
|
-static void snd_rpi_raspidac3_shutdown(struct snd_pcm_substream *substream) {
|
|
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
|
|
- struct snd_soc_codec *codec = rtd->codec;
|
|
- snd_soc_update_bits(codec, PCM512x_GPIO_CONTROL_1, 0x08,0x00);
|
|
-}
|
|
-
|
|
-/* machine stream operations */
|
|
-static struct snd_soc_ops snd_rpi_raspidac3_ops = {
|
|
- .startup = snd_rpi_raspidac3_startup,
|
|
- .shutdown = snd_rpi_raspidac3_shutdown,
|
|
-};
|
|
-
|
|
-/* interface setup */
|
|
-static struct snd_soc_dai_link snd_rpi_raspidac3_dai[] = {
|
|
-{
|
|
- .name = "RaspiDAC Rev.3x",
|
|
- .stream_name = "RaspiDAC HiFi",
|
|
- .cpu_dai_name = "bcm2708-i2s.0",
|
|
- .codec_dai_name = "pcm512x-hifi",
|
|
- .platform_name = "bcm2708-i2s.0",
|
|
- .codec_name = "pcm512x.1-004c",
|
|
- .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
|
|
- SND_SOC_DAIFMT_CBS_CFS,
|
|
- .ops = &snd_rpi_raspidac3_ops,
|
|
- .init = snd_rpi_raspidac3_init,
|
|
-},
|
|
-};
|
|
-
|
|
-/* audio machine driver */
|
|
-static struct snd_soc_card snd_rpi_raspidac3 = {
|
|
- .name = "RaspiDAC Rev.3x HiFi Audio Card",
|
|
- .owner = THIS_MODULE,
|
|
- .dai_link = snd_rpi_raspidac3_dai,
|
|
- .num_links = ARRAY_SIZE(snd_rpi_raspidac3_dai),
|
|
-};
|
|
-
|
|
-/* sound card test */
|
|
-static int snd_rpi_raspidac3_probe(struct platform_device *pdev)
|
|
-{
|
|
- int ret = 0;
|
|
-
|
|
- snd_rpi_raspidac3.dev = &pdev->dev;
|
|
-
|
|
- if (pdev->dev.of_node) {
|
|
- struct device_node *i2s_node;
|
|
- struct snd_soc_dai_link *dai = &snd_rpi_raspidac3_dai[0];
|
|
- i2s_node = of_parse_phandle(pdev->dev.of_node,
|
|
- "i2s-controller", 0);
|
|
-
|
|
- if (i2s_node) {
|
|
- dai->cpu_dai_name = NULL;
|
|
- dai->cpu_of_node = i2s_node;
|
|
- dai->platform_name = NULL;
|
|
- dai->platform_of_node = i2s_node;
|
|
- }
|
|
- }
|
|
-
|
|
- ret = snd_soc_register_card(&snd_rpi_raspidac3);
|
|
- if (ret && ret != -EPROBE_DEFER)
|
|
- dev_err(&pdev->dev,
|
|
- "snd_soc_register_card() failed: %d\n", ret);
|
|
-
|
|
- return ret;
|
|
-}
|
|
-
|
|
-/* sound card disconnect */
|
|
-static int snd_rpi_raspidac3_remove(struct platform_device *pdev)
|
|
-{
|
|
- return snd_soc_unregister_card(&snd_rpi_raspidac3);
|
|
-}
|
|
-
|
|
-static const struct of_device_id raspidac3_of_match[] = {
|
|
- { .compatible = "jg,raspidacv3", },
|
|
- {},
|
|
-};
|
|
-MODULE_DEVICE_TABLE(of, raspidac3_of_match);
|
|
-
|
|
-/* sound card platform driver */
|
|
-static struct platform_driver snd_rpi_raspidac3_driver = {
|
|
- .driver = {
|
|
- .name = "snd-rpi-raspidac3",
|
|
- .owner = THIS_MODULE,
|
|
- .of_match_table = raspidac3_of_match,
|
|
- },
|
|
- .probe = snd_rpi_raspidac3_probe,
|
|
- .remove = snd_rpi_raspidac3_remove,
|
|
-};
|
|
-
|
|
-module_platform_driver(snd_rpi_raspidac3_driver);
|
|
-
|
|
-MODULE_AUTHOR("Jan Grulich <jan@grulich.eu>");
|
|
-MODULE_DESCRIPTION("ASoC Driver for RaspiDAC Rev.3x");
|
|
-MODULE_LICENSE("GPL v2");
|