openwrt/target/linux/ramips/dts/WSR-600.dts
Rosen Penev 02f815d190 ramips: Fix WiFi after 5f7396ebef
That commit exposed a bug in the DTS files used by mt7621 where the wrong
reg value for pcie1 (and potentially pcie2) was being used. This was
causing WiFi failures for interfaces in pcie1.

eg. 2.4GHz working but not 5GHz.

As all of these dts entries are already specified in mt7621.dtsi, remove
them.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2018-05-30 06:33:56 +02:00

181 lines
2.9 KiB
Plaintext

/dts-v1/;
#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "buffalo,wsr-600dhp", "mediatek,mt7621-soc";
model = "Buffalo WSR-600DHP";
memory@0 {
device_type = "memory";
reg = <0x0 0x4000000>;
};
chosen {
bootargs = "console=ttyS0,57600";
};
gpio-leds {
compatible = "gpio-leds";
power {
label = "wsr-600:green:power";
gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
};
wifi_o {
label = "wsr-600:orange:wifi";
gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
};
diag {
label = "wsr-600:orange:diag";
gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
};
wifi_g {
label = "wsr-600:green:wifi";
gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
};
router_o {
label = "wsr-600:orange:router";
gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
};
router_g {
label = "wsr-600:green:router";
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
};
internet_o {
label = "wsr-600:orange:internet";
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
};
internet_g {
label = "wsr-600:green:internet";
gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
power {
label = "power";
gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
};
reset {
label = "reset";
gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
aoss {
label = "aoss";
gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
auto {
label = "mode";
gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
linux,code = <BTN_0>;
linux,input-type = <EV_SW>;
};
ap {
label = "ap";
gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
linux,code = <BTN_0>;
linux,input-type = <EV_SW>;
};
router {
label = "router";
gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
linux,code = <BTN_0>;
linux,input-type = <EV_SW>;
};
};
gpio_poweroff {
compatible = "gpio-poweroff";
gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
};
};
&spi0 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
m25p,chunked-io = <32>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0xfb0000>;
};
};
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "i2c", "uart2", "uart3", "rgmii2", "sdhci";
ralink,function = "gpio";
};
};
};
&pcie {
status = "okay";
pcie0 {
rt5592@0,0 {
ralink,mtd-eeprom = <&factory 0x8000>;
};
};
pcie1 {
mt76@1,0 {
mediatek,mtd-eeprom = <&factory 0x0000>;
};
};
};
&xhci {
status = "disabled";
};