openwrt/target/linux/ar71xx/files/arch/mips/ath79/mach-gs-minibox-v32.c
Pau Escrich 15f16bf05b ar71xx: add support for Gainstrong MiniBox V3.2
Adds MiniBox V3.2 ar71xx target (QCA99531 + QCA9887)
Info: http://oolite.cn/minibox-v3-2-qca9531-qca9887-module-pin-specification.html
Reference patch: http://oolite.cn/wp-content/uploads/2017/09/minibox_v3_cc15.05_20160325.patch
Installation: Upload firmware to uboot via HTTP at 192.168.1.1 (press button for 5 seconds)

Signed-off-by: Pau Escrich <p4u@dabax.net>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(daniel@makrotopia.org: rebased and fixed conflicts, fixed LED name,
                        added ath10k eeprom)
2018-11-15 19:49:51 +01:00

122 lines
3.6 KiB
C

/*
* Atheros GS_MINIBOX_V3.2 reference board support
*
* Copyright (c) 2018 OpenWRT.org
* Copyright (c) 2013 The Linux Foundation. All rights reserved.
* Copyright (c) 2012 Gabor Juhos <juhosg@openwrt.org>
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
*/
#include <linux/pci.h>
#include <linux/platform_device.h>
#include <linux/ath9k_platform.h>
#include <linux/ar8216_platform.h>
#include <asm/mach-ath79/ar71xx_regs.h>
#include "common.h"
#include "dev-eth.h"
#include "dev-ap9x-pci.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-m25p80.h"
#include "dev-spi.h"
#include "dev-usb.h"
#include "dev-wmac.h"
#include "machtypes.h"
#include "pci.h"
#define GS_MINIBOX_V3_GPIO_LED_STATUS 14
#define GS_MINIBOX_V3_GPIO_BTN_RST 17
#define GS_MINIBOX_V3_KEYS_POLL_INTERVAL 20 /* msecs */
#define GS_MINIBOX_V3_KEYS_DEBOUNCE_INTERVAL (3 * GS_MINIBOX_V3_KEYS_POLL_INTERVAL)
#define GS_MINIBOX_V3_MAC0_OFFSET 0
#define GS_MINIBOX_V3_MAC1_OFFSET 6
#define GS_MINIBOX_V3_WMAC_CALDATA_OFFSET 0x1000
static const char *gs_minibox_v3_part_probes[] = {
"tp-link",
NULL,
};
static struct flash_platform_data gs_minibox_v3_flash_data = {
.part_probes = gs_minibox_v3_part_probes,
};
static struct gpio_led gs_minibox_v3_leds_gpio[] __initdata = {
{
.name = "minibox_v3.2:green:system",
.gpio = GS_MINIBOX_V3_GPIO_LED_STATUS,
.active_low = 1,
},
};
static struct gpio_keys_button gs_minibox_v3_gpio_keys[] __initdata = {
{
.desc = "reset button",
.type = EV_KEY,
.code = KEY_RESTART,
.debounce_interval = GS_MINIBOX_V3_KEYS_DEBOUNCE_INTERVAL,
.gpio = GS_MINIBOX_V3_GPIO_BTN_RST,
.active_low = 1,
},
};
static void __init gs_minibox_v3_gpio_led_setup(void)
{
ath79_register_leds_gpio(-1, ARRAY_SIZE(gs_minibox_v3_leds_gpio),
gs_minibox_v3_leds_gpio);
ath79_register_gpio_keys_polled(-1, GS_MINIBOX_V3_KEYS_POLL_INTERVAL,
ARRAY_SIZE(gs_minibox_v3_gpio_keys),
gs_minibox_v3_gpio_keys);
}
static void __init gs_minibox_v3_setup(void)
{
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
ath79_register_m25p80(&gs_minibox_v3_flash_data);
gs_minibox_v3_gpio_led_setup();
ath79_register_usb();
ath79_register_wmac(art + GS_MINIBOX_V3_WMAC_CALDATA_OFFSET, NULL);
ath79_register_mdio(0, 0x0);
ath79_register_mdio(1, 0x0);
ath79_init_mac(ath79_eth0_data.mac_addr, art + GS_MINIBOX_V3_MAC0_OFFSET, 0);
ath79_init_mac(ath79_eth1_data.mac_addr, art + GS_MINIBOX_V3_MAC1_OFFSET, 0);
/* WAN port */
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
ath79_eth0_data.speed = SPEED_100;
ath79_eth0_data.duplex = DUPLEX_FULL;
ath79_eth0_data.phy_mask = BIT(4);
ath79_register_eth(0);
/* LAN ports */
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
ath79_eth1_data.speed = SPEED_1000;
ath79_eth1_data.duplex = DUPLEX_FULL;
ath79_switch_data.phy_poll_mask |= BIT(4);
ath79_switch_data.phy4_mii_en = 1;
ath79_register_eth(1);
ath79_register_pci();
}
MIPS_MACHINE(ATH79_MACH_GS_MINIBOX_V32, "MINIBOX-V3.2", "Minibox V3.2",
gs_minibox_v3_setup);