mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-25 00:11:13 +00:00
7d7aa2fd92
This change makes the names of Broadcom targets consistent by using the common notation based on SoC/CPU ID (which is used internally anyway), bcmXXXX instead of brcmXXXX. This is even used for target TITLE in make menuconfig already, only the short target name used brcm so far. Despite, since subtargets range from bcm2708 to bcm2711, it seems appropriate to use bcm27xx instead of bcm2708 (again, as already done for BOARDNAME). This also renames the packages brcm2708-userland and brcm2708-gpu-fw. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Acked-by: Álvaro Fernández Rojas <noltari@gmail.com>
49 lines
2.1 KiB
Diff
49 lines
2.1 KiB
Diff
From 4ebec374d97c0bba1e41558071bfa062894b07a0 Mon Sep 17 00:00:00 2001
|
|
From: Phil Elwell <phil@raspberrypi.org>
|
|
Date: Fri, 20 Jul 2018 22:03:41 +0100
|
|
Subject: [PATCH] bcm2835-dma: Add support for per-channel flags
|
|
|
|
Add the ability to interpret the high bits of the dreq specifier as
|
|
flags to be included in the DMA_CS register. The motivation for this
|
|
change is the ability to set the DISDEBUG flag for SD card transfers
|
|
to avoid corruption when using the VPU debugger.
|
|
|
|
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
|
|
---
|
|
drivers/dma/bcm2835-dma.c | 10 ++++++++--
|
|
1 file changed, 8 insertions(+), 2 deletions(-)
|
|
|
|
--- a/drivers/dma/bcm2835-dma.c
|
|
+++ b/drivers/dma/bcm2835-dma.c
|
|
@@ -146,6 +146,10 @@ struct bcm2835_desc {
|
|
#define BCM2835_DMA_S_DREQ BIT(10) /* enable SREQ for source */
|
|
#define BCM2835_DMA_S_IGNORE BIT(11) /* ignore source reads - read 0 */
|
|
#define BCM2835_DMA_BURST_LENGTH(x) ((x & 15) << 12)
|
|
+#define BCM2835_DMA_CS_FLAGS(x) (x & (BCM2835_DMA_PRIORITY(15) | \
|
|
+ BCM2835_DMA_PANIC_PRIORITY(15) | \
|
|
+ BCM2835_DMA_WAIT_FOR_WRITES | \
|
|
+ BCM2835_DMA_DIS_DEBUG))
|
|
#define BCM2835_DMA_PER_MAP(x) ((x & 31) << 16) /* REQ source */
|
|
#define BCM2835_DMA_WAIT(x) ((x & 31) << 21) /* add DMA-wait cycles */
|
|
#define BCM2835_DMA_NO_WIDE_BURSTS BIT(26) /* no 2 beat write bursts */
|
|
@@ -461,7 +465,8 @@ static void bcm2835_dma_start_desc(struc
|
|
c->desc = d = to_bcm2835_dma_desc(&vd->tx);
|
|
|
|
writel(d->cb_list[0].paddr, c->chan_base + BCM2835_DMA_ADDR);
|
|
- writel(BCM2835_DMA_ACTIVE, c->chan_base + BCM2835_DMA_CS);
|
|
+ writel(BCM2835_DMA_ACTIVE | BCM2835_DMA_CS_FLAGS(c->dreq),
|
|
+ c->chan_base + BCM2835_DMA_CS);
|
|
}
|
|
|
|
static irqreturn_t bcm2835_dma_callback(int irq, void *data)
|
|
@@ -488,7 +493,8 @@ static irqreturn_t bcm2835_dma_callback(
|
|
* if this IRQ handler is threaded.) If the channel is finished, it
|
|
* will remain idle despite the ACTIVE flag being set.
|
|
*/
|
|
- writel(BCM2835_DMA_INT | BCM2835_DMA_ACTIVE,
|
|
+ writel(BCM2835_DMA_INT | BCM2835_DMA_ACTIVE |
|
|
+ BCM2835_DMA_CS_FLAGS(c->dreq),
|
|
c->chan_base + BCM2835_DMA_CS);
|
|
|
|
d = c->desc;
|