ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-24 15:56:49 +00:00
Code Issues Actions 6 Packages Projects Releases Wiki Activity
7d3789de99
openwrt/package/firmware/ipq-wifi/Makefile
George Witt 9b33645566 ipq807x: add support for TP-Link EAP660 HD v1 
Specifications:
* SoC: Qualcomm IPQ8072A (64-bit Quad-core Arm Cortex-A53 @ 2200MHz)
* Memory: 2x ESMT M15T4G16256A-DEBG2G (1 GiB DDR3-1866 13-13-13)
* Serial Port: 3v3 TTL 115200n8
* Wi-Fi: QCN5054 (4x4 5 GHz 802.11ax)
* Wi-Fi: QCN5024 (4x4 2.4 GHz 802.11b/g/n/ax)
* Ethernet: QCA8081 (10/100/1000/2.5GBASE-T)
* Flash: Winbond W29N01HZSINF (128 MiB)
* LEDs: 1x Blue Status (GPIO 42 Active High)
* Buttons: 1x Reset (GPIO 50 Active Low)

Installation Instructions (Serial+TFTP):
1. Solder 4 pin header to JP1 and bridge pads of R58 and R62.
2. Connect 3V3 TTL port to TX, RX, and GND, which are positions 1, 2,
   and 3 respectively. Be sure to crossover TX and RX.
3. Copy RAM firmware image
   openwrt-qualcommax-ipq807x-tplink_eap660hd-v1-initramfs-uImage.itb
   to TFTP server root, available at 192.168.10.1.
4. Connect PoE ethernet cable to the RJ45 port and hold Ctrl+B in the
   serial console (115200 baud) until autoboot is halted.
5. Run the following commands in the U-boot prompt:
   # tftpboot 0x44000000 openwrt-qualcommax-ipq807x-tplink_eap660hd-v1-initramfs-uImage.itb
   # bootm
   You may need to type Ctrl+C and Enter before running these commands
   to clear invisible characters from the buffer.
6. Run the following command in a terminal to copy the sysupgrade image
   to be installed (check IP address):
   $ scp openwrt-qualcommax-ipq807x-tplink_eap660hd-v1-squashfs-sysupgrade.bin root@192.168.1.1:/tmp/
7. Activate the OpenWrt serial console and run the following commands:
   # cd /tmp
   # sysupgrade -n openwrt-qualcommax-ipq807x-tplink_eap660hd-v1-squashfs-sysupgrade.bin
8. The AP will reboot and OpenWrt will be successfully installed.

Signed-off-by: George Witt <george.witt@nltsproject.org>
Link: https://github.com/openwrt/openwrt/pull/15832
Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-09-08 12:01:19 +02:00

195 lines
7.5 KiB
Makefile
Raw Blame History

include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/version.mk
PKG_NAME:=ipq-wifi
PKG_RELEASE:=1
PKG_SOURCE_PROTO:=git
PKG_SOURCE_URL=$(PROJECT_GIT)/project/firmware/qca-wireless.git
PKG_SOURCE_DATE:=2024-07-04
PKG_SOURCE_VERSION:=fcdb2e74a6e4518266679292071c8f47f87b4df2
PKG_MIRROR_HASH:=bfa2388468eb74221c7d1696089bb8ad3ca2b3b27ebff657f1962a6bbe6ccc11
PKG_FLAGS:=nonshared
include $(INCLUDE_DIR)/package.mk
define Build/Compile
endef
# Use ath10k-bdencoder from https://github.com/qca/qca-swiss-army-knife.git
# to generate the board-* files here.
#
# This is intended to be used on an interim basis until device-specific
# board data for new devices is available through the upstream compilation
#
# Please send a mail with your device-specific board files upstream.
# You can find instructions and examples on the linux-wireless wiki:
# <https://wireless.wiki.kernel.org/en/users/drivers/ath10k/boardfiles>
ALLWIFIBOARDS:= \
8devices_mango \
arcadyan_aw1000 \
asus_rt-ax89x \
buffalo_wxr-5950ax12 \
cambiumnetworks_xe34 \
cmcc_rm2-6 \
compex_wpq873 \
dynalink_dl-wrx36 \
edgecore_eap102 \
edimax_cax1800 \
linksys_mx4200 \
linksys_mx5300 \
linksys_mx8500 \
linksys_whw03 \
netgear_lbr20 \
netgear_rax120v2 \
netgear_sxk80 \
netgear_wax214 \
netgear_wax218 \
netgear_wax620 \
netgear_wax630 \
prpl_haze \
qnap_301w \
redmi_ax6 \
spectrum_sax1v1k \
tplink_eap660hd-v1 \
wallys_dr40x9 \
xiaomi_ax3600 \
xiaomi_ax9000 \
yyets_le1 \
yuncore_ax880 \
yuncore_fap650 \
zbtlink_zbt-z800ax \
zte_mf269 \
zte_mf287 \
zte_mf287plus \
zyxel_nbg7815
ALLWIFIPACKAGES:=$(foreach BOARD,$(ALLWIFIBOARDS),ipq-wifi-$(BOARD))
define Package/ipq-wifi-default
SUBMENU:=ath10k Board-Specific Overrides
SECTION:=firmware
CATEGORY:=Firmware
DEPENDS:=@(TARGET_ipq40xx||TARGET_ipq806x||TARGET_qualcommax)
TITLE:=Custom Board
endef
define ipq-wifi-install-one-to
$(INSTALL_DIR) $(2)/lib/firmware/ath10k/$(3)/
$(INSTALL_DATA) $(1) $(2)/lib/firmware/ath10k/$(3)/board-2.bin
endef
define ipq-wifi-install-ath11-one-to
$(INSTALL_DIR) $(2)/lib/firmware/ath11k/$(3)/
$(INSTALL_DATA) $(1) $(2)/lib/firmware/ath11k/$(3)/board-2.bin
endef
define ipq-wifi-install-one
$(if $(filter $(suffix $(1)),.QCA4019 .qca4019),\
$(call ipq-wifi-install-one-to,$(1),$(2),QCA4019/hw1.0),\
$(if $(filter $(suffix $(1)),.QCA9888 .qca9888),\
$(call ipq-wifi-install-one-to,$(1),$(2),QCA9888/hw2.0),\
$(if $(filter $(suffix $(1)),.QCA9889 .qca9889),\
$(call ipq-wifi-install-one-to,$(1),$(2),QCA9887/hw1.0),\
$(if $(filter $(suffix $(1)),.QCA9984 .qca9984),\
$(call ipq-wifi-install-one-to,$(1),$(2),QCA9984/hw1.0),\
$(if $(filter $(suffix $(1)),.QCA99X0 .qca99x0),\
$(call ipq-wifi-install-one-to,$(1),$(2),QCA99X0/hw2.0),\
$(if $(filter $(suffix $(1)),.IPQ6018 .ipq6018),\
$(call ipq-wifi-install-ath11-one-to,$(1),$(2),IPQ6018/hw1.0),\
$(if $(filter $(suffix $(1)),.IPQ8074 .ipq8074),\
$(call ipq-wifi-install-ath11-one-to,$(1),$(2),IPQ8074/hw2.0),\
$(if $(filter $(suffix $(1)),.QCN9074 .qcn9074),\
$(call ipq-wifi-install-ath11-one-to,$(1),$(2),QCN9074/hw1.0),\
$(error Unrecognized board-file suffix '$(suffix $(1))' for '$(1)')\
))))))))
endef
# Blank line required at end of above define due to foreach context
define generate-ipq-wifi-package
define Package/ipq-wifi-$(1)
$(call Package/ipq-wifi-default)
TITLE:=board-2.bin Overrides for $(2)
CONFLICTS:=$(PREV_BOARD)
endef
define Package/ipq-wifi-$(1)/description
The $(2) requires board-specific, reference ("cal") data
that is not yet present in the upstream wireless firmware distribution.
This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.
This is package is only necessary for the $(2).
Do not install it for any other device!
endef
define Package/ipq-wifi-$(1)/install-overlay
$$$$(foreach IPQ_WIFI_BOARD_FILE,$$$$(wildcard $(PKG_BUILD_DIR)/board-$(1).*),\
$$$$(call ipq-wifi-install-one,$$$$(IPQ_WIFI_BOARD_FILE),$$(1)))
endef
PREV_BOARD+=ipq-wifi-$(1)
endef
# To add local files for testing:
# 1. create a new directory in the ipq-wifi package directory called "files".
# 2. place there the needed board files.
#
# To send a board file upstream:
# 1. create a pull request in https://github.com/openwrt/firmware_qca-wireless or
# send a patch to the mailing list adding the tag firmware/qca-wireless before
# the PATCH tag.
# 2. create a pull request in the main openwrt repository bumping the ipq-wifi
# package to the new version and adding the required lines to add the board file.
#
# Changes needed to the ipq-wifi Makefile:
# 1. Add board name to ALLWIFIBOARDS
# 2. Add $(eval $(call generate-ipq-wifi-package,<devicename>,<display name>))
#
# Board files should follow this name structure:
# board-<devicename>.<qca4019|qca9888|qca9889|qca9984|qca99x0|ipq8074>
$(eval $(call generate-ipq-wifi-package,8devices_mango,8devices Mango))
$(eval $(call generate-ipq-wifi-package,arcadyan_aw1000,Arcadyan AW1000))
$(eval $(call generate-ipq-wifi-package,asus_rt-ax89x,Asus RT-AX89X))
$(eval $(call generate-ipq-wifi-package,buffalo_wxr-5950ax12,Buffalo WXR-5950AX12))
$(eval $(call generate-ipq-wifi-package,cambiumnetworks_xe34,Cambium Networks XE3-4))
$(eval $(call generate-ipq-wifi-package,cmcc_rm2-6,CMCC RM2-6))
$(eval $(call generate-ipq-wifi-package,compex_wpq873,Compex WPQ-873))
$(eval $(call generate-ipq-wifi-package,dynalink_dl-wrx36,Dynalink DL-WRX36))
$(eval $(call generate-ipq-wifi-package,edgecore_eap102,Edgecore EAP102))
$(eval $(call generate-ipq-wifi-package,edimax_cax1800,Edimax CAX1800))
$(eval $(call generate-ipq-wifi-package,linksys_mx4200,Linksys MX4200))
$(eval $(call generate-ipq-wifi-package,linksys_mx5300,Linksys MX5300))
$(eval $(call generate-ipq-wifi-package,linksys_mx8500,Linksys MX8500))
$(eval $(call generate-ipq-wifi-package,linksys_whw03,Linksys WHW03))
$(eval $(call generate-ipq-wifi-package,netgear_lbr20,Netgear LBR20))
$(eval $(call generate-ipq-wifi-package,netgear_rax120v2,Netgear RAX120v2))
$(eval $(call generate-ipq-wifi-package,netgear_sxk80,Netgear SXK80))
$(eval $(call generate-ipq-wifi-package,netgear_wax214,Netgear WAX214))
$(eval $(call generate-ipq-wifi-package,netgear_wax218,Netgear WAX218))
$(eval $(call generate-ipq-wifi-package,netgear_wax620,Netgear WAX620))
$(eval $(call generate-ipq-wifi-package,netgear_wax630,Netgear WAX630))
$(eval $(call generate-ipq-wifi-package,qnap_301w,QNAP 301w))
$(eval $(call generate-ipq-wifi-package,prpl_haze,prpl Haze))
$(eval $(call generate-ipq-wifi-package,redmi_ax6,Redmi AX6))
$(eval $(call generate-ipq-wifi-package,spectrum_sax1v1k,Spectrum SAX1V1K))
$(eval $(call generate-ipq-wifi-package,tplink_eap660hd-v1,TP-Link EAP660 HD v1))
$(eval $(call generate-ipq-wifi-package,wallys_dr40x9,Wallys DR40X9))
$(eval $(call generate-ipq-wifi-package,xiaomi_ax3600,Xiaomi AX3600))
$(eval $(call generate-ipq-wifi-package,xiaomi_ax9000,Xiaomi AX9000))
$(eval $(call generate-ipq-wifi-package,yyets_le1,YYeTs LE1))
$(eval $(call generate-ipq-wifi-package,yuncore_ax880,Yuncore AX880))
$(eval $(call generate-ipq-wifi-package,yuncore_fap650,Yuncore FAP650))
$(eval $(call generate-ipq-wifi-package,zbtlink_zbt-z800ax,Zbtlink ZBT-Z800AX))
$(eval $(call generate-ipq-wifi-package,zte_mf269,ZTE MF269))
$(eval $(call generate-ipq-wifi-package,zte_mf287,ZTE MF287))
$(eval $(call generate-ipq-wifi-package,zte_mf287plus,ZTE MF287Plus))
$(eval $(call generate-ipq-wifi-package,zyxel_nbg7815,Zyxel NBG7815))
$(foreach PACKAGE,$(ALLWIFIPACKAGES),$(eval $(call BuildPackage,$(PACKAGE))))
Reference in New Issue View Git Blame Copy Permalink