mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-30 10:39:04 +00:00
92e0baba42
Flash layouts for GS108Tv3, GS110TPPv1, GS308Tv1 and GS310TPv1 are almost identical, except for the uimage header magic. Move the flash layout to the common dtsi, and only place the magic value in the device dts files. Signed-off-by: Sander Vanheule <sander@svanheule.net>
142 lines
2.4 KiB
Plaintext
142 lines
2.4 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
|
|
#include "rtl838x.dtsi"
|
|
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
/ {
|
|
compatible = "realtek,rtl838x-soc";
|
|
|
|
memory@0 {
|
|
device_type = "memory";
|
|
reg = <0x0 0x8000000>;
|
|
};
|
|
|
|
keys {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinmux_disable_sys_led>;
|
|
|
|
compatible = "gpio-keys";
|
|
|
|
mode {
|
|
label = "reset";
|
|
gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_RESTART>;
|
|
};
|
|
};
|
|
|
|
gpio-restart {
|
|
compatible = "gpio-restart";
|
|
gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
|
|
open-source;
|
|
};
|
|
|
|
gpio1: rtl8231-gpio {
|
|
compatible = "realtek,rtl8231-gpio";
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
indirect-access-bus-id = <31>;
|
|
};
|
|
};
|
|
|
|
ðernet0 {
|
|
mdio: mdio-bus {
|
|
compatible = "realtek,rtl838x-mdio";
|
|
regmap = <ðernet0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
INTERNAL_PHY(8)
|
|
INTERNAL_PHY(9)
|
|
INTERNAL_PHY(10)
|
|
INTERNAL_PHY(11)
|
|
INTERNAL_PHY(12)
|
|
INTERNAL_PHY(13)
|
|
INTERNAL_PHY(14)
|
|
INTERNAL_PHY(15)
|
|
};
|
|
};
|
|
|
|
&spi0 {
|
|
status = "okay";
|
|
|
|
flash@0 {
|
|
compatible = "jedec,spi-nor";
|
|
reg = <0>;
|
|
spi-max-frequency = <50000000>;
|
|
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "u-boot";
|
|
reg = <0x0000000 0x00e0000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@e0000 {
|
|
label = "u-boot-env";
|
|
reg = <0x00e0000 0x0010000>;
|
|
};
|
|
|
|
partition@f0000 {
|
|
label = "u-boot-env2";
|
|
reg = <0x00f0000 0x0010000>;
|
|
};
|
|
|
|
partition@100000 {
|
|
label = "jffs";
|
|
reg = <0x0100000 0x0100000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@200000 {
|
|
label = "jffs2";
|
|
reg = <0x0200000 0x0100000>;
|
|
read-only;
|
|
};
|
|
|
|
firmware: partition@300000 {
|
|
label = "firmware";
|
|
compatible = "openwrt,uimage", "denx,uimage";
|
|
reg = <0x0300000 0x0e80000>;
|
|
};
|
|
|
|
partition@1180000 {
|
|
label = "runtime2";
|
|
reg = <0x1180000 0x0e80000>;
|
|
read-only;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&switch0 {
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
SWITCH_PORT(8, 1, internal)
|
|
SWITCH_PORT(9, 2, internal)
|
|
SWITCH_PORT(10, 3, internal)
|
|
SWITCH_PORT(11, 4, internal)
|
|
SWITCH_PORT(12, 5, internal)
|
|
SWITCH_PORT(13, 6, internal)
|
|
SWITCH_PORT(14, 7, internal)
|
|
SWITCH_PORT(15, 8, internal)
|
|
|
|
port@28 {
|
|
ethernet = <ðernet0>;
|
|
reg = <28>;
|
|
phy-mode = "internal";
|
|
fixed-link {
|
|
speed = <1000>;
|
|
full-duplex;
|
|
};
|
|
};
|
|
};
|
|
};
|