This repository is a mirror of https://git.openwrt.org/openwrt/openwrt.git It is for reference only and is not active for check-ins. We will continue to accept Pull Requests here. They will be merged via staging trees then into openwrt.git.
Go to file
Daniel Golle 7c459ac1d5 mac80211: rt2x00: experimental improvements for MT7620 wifi
Serge Vasilugin reports:

To improve mt7620 built-in wifi performance some changes:
1. Correct BW20/BW40 switching (see comments with mark (1))
2. Correct TX_SW_CFG1 MAC reg from v3 of vendor driver see
	https://gitlab.com/dm38/padavan-ng/-/blob/master/trunk/proprietary/rt_wifi/rtpci/3.0.X.X/mt76x2/chips/rt6352.c#L531
3. Set bbp66 for all chains.
4. US_CYC_CNT init based on Programming guide, default value was 33 (pci),
   set chipset bus clock with fallback to cpu clock/3.
5. Don't overwrite default values for mt7620.
6. Correct some typos.
7. Add support for external LNA:
    a) RF and BBP regs never be corrected for this mode
    b) eLNA is driven the same way as ePA with mt7620's pin PA
	but vendor driver explicitly pin PA to gpio mode (for forrect calibration?)
	so I'm not sure that request for pa_pin in dts-file will be enough

First 5 changes (really 2) improve performance for boards w/o eLNA/ePA.
Changes 7 add support for eLNA

Configuration w/o eLAN/ePA and with eLNA show results
tx/rx (from router point of view) for each stream:
 35-40/30-35 Mbps for HT20
 65-70/60-65 Mbps for HT40

Yes. Max results for 2T2R client is 140-145/135-140
with peaks 160/150, It correspond to mediatek driver results.
Boards with ePA untested.

Reported-by: Serge Vasilugin <vasilugin@yandex.ru>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
[directly include v3 of the patchset submitted upstream]
(cherry picked from commit 31a6605de0)
(cherry picked from commit e785ca05e9)
(cherry picked from commit 412fcf3d44)
2022-09-19 02:48:26 +01:00
.github CI: move logs/ to GITHUB_WORKSPACE 2022-03-09 14:24:49 +01:00
config scripts: always check certificates 2022-09-16 18:50:46 +02:00
include kernel: bump 5.10 to 5.10.143 2022-09-17 15:58:25 +02:00
LICENSES LICENSES: include all used licenses in LICENSES directory 2021-02-14 19:21:38 +01:00
package mac80211: rt2x00: experimental improvements for MT7620 wifi 2022-09-19 02:48:26 +01:00
scripts scripts/download.pl: fix downloads with wget 2022-09-16 18:50:46 +02:00
target mac80211: rt2x00: experimental improvements for MT7620 wifi 2022-09-19 02:48:26 +01:00
toolchain toolchain: Update glibc 2.34 to recent HEAD 2022-08-14 21:06:53 +02:00
tools tools: remove xxd package 2022-09-16 18:50:46 +02:00
.gitattributes
.gitignore .gitgnore: add llvm-bpf 2021-11-21 18:18:01 +01:00
BSDmakefile build: use SPDX license tags 2021-02-05 14:54:47 +01:00
Config.in build: scripts/config - update to kconfig-v5.14 2022-02-19 13:10:01 +01:00
COPYING COPYING: add COPYING file to specify project licenses 2021-02-14 19:21:38 +01:00
feeds.conf.default OpenWrt v22.03.0: revert to branch defaults 2022-09-03 18:49:08 +02:00
Makefile build: don't remove BUILD_LOG_DIR in _clean 2022-05-01 13:23:12 +02:00
README.md README: mention video feed 2021-10-19 15:47:44 -10:00
rules.mk scripts: always check certificates 2022-09-16 18:50:46 +02:00

OpenWrt logo

OpenWrt Project is a Linux operating system targeting embedded devices. Instead of trying to create a single, static firmware, OpenWrt provides a fully writable filesystem with package management. This frees you from the application selection and configuration provided by the vendor and allows you to customize the device through the use of packages to suit any application. For developers, OpenWrt is the framework to build an application without having to build a complete firmware around it; for users this means the ability for full customization, to use the device in ways never envisioned.

Sunshine!

Development

To build your own firmware you need a GNU/Linux, BSD or MacOSX system (case sensitive filesystem required). Cygwin is unsupported because of the lack of a case sensitive file system.

Requirements

You need the following tools to compile OpenWrt, the package names vary between distributions. A complete list with distribution specific packages is found in the Build System Setup documentation.

binutils bzip2 diff find flex gawk gcc-6+ getopt grep install libc-dev libz-dev
make4.1+ perl python3.6+ rsync subversion unzip which

Quickstart

  1. Run ./scripts/feeds update -a to obtain all the latest package definitions defined in feeds.conf / feeds.conf.default

  2. Run ./scripts/feeds install -a to install symlinks for all obtained packages into package/feeds/

  3. Run make menuconfig to select your preferred configuration for the toolchain, target system & firmware packages.

  4. Run make to build your firmware. This will download all sources, build the cross-compile toolchain and then cross-compile the GNU/Linux kernel & all chosen applications for your target system.

The main repository uses multiple sub-repositories to manage packages of different categories. All packages are installed via the OpenWrt package manager called opkg. If you're looking to develop the web interface or port packages to OpenWrt, please find the fitting repository below.

  • LuCI Web Interface: Modern and modular interface to control the device via a web browser.

  • OpenWrt Packages: Community repository of ported packages.

  • OpenWrt Routing: Packages specifically focused on (mesh) routing.

  • OpenWrt Video: Packages specifically focused on display servers and clients (Xorg and Wayland).

Support Information

For a list of supported devices see the OpenWrt Hardware Database

Documentation

Support Community

  • Forum: For usage, projects, discussions and hardware advise.
  • Support Chat: Channel #openwrt on oftc.net.

Developer Community

License

OpenWrt is licensed under GPL-2.0