Stijn Tintel 7c240ee279 qoriq: use FIT uImage for Firebox M300 kernel ... This requires U-Boot environment changes: setenv OpenWrt_kernel watchguard_firebox-m300-fit-uImage.itb setenv loadaddr 0x20000000 setenv wgBootSysA 'setenv bootargs root=/dev/mmcblk0p2 rw rootdelay=2 console=$consoledev,$baudrate fsl_dpaa_fman.fsl_fm_max_frm=1530; mmc dev 0; ext2load mmc 0:1 $loadaddr $OpenWrt_kernel; bootm $loadaddr' Trying to sysupgrade an image containing this change on an M300 already running OpenWrt will fail with the following error: Tue Jun 14 12:06:21 EEST 2022 upgrade: The device is supported, but the config is incompatible to the new image (1.0->1.1). Please upgrade without keeping config (sysupgrade -n). Tue Jun 14 12:06:21 EEST 2022 upgrade: Kernel switched to FIT uImage. Update U-Boot environment. Tue Jun 14 12:06:21 EEST 2022 upgrade: Reading partition table from bootdisk... Tue Jun 14 12:06:21 EEST 2022 upgrade: Extract boot sector from the image Tue Jun 14 12:06:21 EEST 2022 upgrade: Reading partition table from image... Image check failed. This is to prevent rendering your device unbootable. Make the U-Boot environment changes as instruced above, and then flash the image using sysupgrade -F. The config can be kept, there is no need to use -n. After the new image booted successfully, you can increase the compat_version: uci set system.@system[0].compat_version='1.1' uci commit Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> (cherry picked from commit c4b499bc03)		2022-06-29 01:42:23 +03:00
..
base-files	qoriq: add support for WatchGuard Firebox M300	2021-12-21 21:37:46 +02:00
files/arch/powerpc/boot/dts/fsl	qoriq: add support for WatchGuard Firebox M300	2021-12-21 21:37:46 +02:00
generic	qoriq: Expand generic subtarget description	2022-01-05 10:54:59 +02:00
image	qoriq: use FIT uImage for Firebox M300 kernel	2022-06-29 01:42:23 +03:00
config-5.10	generic: enable CRYPTO_LIB_BLAKE2S[_X86|_ARM]	2022-06-27 22:34:07 +02:00
Makefile