mirror of
https://github.com/openwrt/openwrt.git
synced 2025-01-05 05:24:20 +00:00
480003e9eb
The Helios 4 is a NAS from Kobol that is powered by an Armada 38x MicroSOM from Solidrun, similarly to Clearfog. This device has: -Armada 38x CPU (dual core ARMv7 1.6 Ghz) -2 GB of ECC RAM -Gigabit ethernet (Marvell) -2x USB 3.0 ports -4x Sata 3.0 ports -i2c header (J9 |>GND|SDA|SCL|VCC) -2x 3-pin fan headers with PWM -micro-usb port is a TTL/UART to USB converter connected to TTL -MicroSD card slot -System, 4xSata and 1xUSB LEDs NOT WORKING: fan control Fan Control requires a kernel patch that is available in the Armbian project (the "default firmware" of this device) and named mvebu-gpio-remove-hardcoded -timer-assignment This patch isn't acceptable by OpenWrt, it should be upstreamed. I also have that patch in my own local OpenWrt builds, in case you want a more clean and less confusing patch for upstreaming. To install, write the disk image on a micro SD card with dd or win32 disk imager, insert the card in the slot. Check that the dip switch battery for boot selection is as follows Switch 1 and 2 down/off, switches 3, 4, 5 up/on. Signed-off-by: Alberto Bursi <bobafetthotmail@gmail.com>
11 lines
314 B
Diff
11 lines
314 B
Diff
--- a/arch/arm/mach-mvebu/Kconfig
|
|
+++ b/arch/arm/mach-mvebu/Kconfig
|
|
@@ -68,6 +68,7 @@
|
|
select HAVE_SMP
|
|
select MACH_MVEBU_V7
|
|
select PINCTRL_ARMADA_38X
|
|
+ select ARCH_WANT_LIBATA_LEDS
|
|
help
|
|
Say 'Y' here if you want your kernel to support boards based
|
|
on the Marvell Armada 380/385 SoC with device tree.
|