David Bauer 7bf6b59724 ramips: various Netgear R6120 fixes ... The R6120 has no 5GHz WLAN LED, the assigned GPIO in fact controls the WAN LED. Renames the LED accordingly in the device-tree. Removes the 5GHz WLAN LED trigger. Adds the correct WAN port LED trigger. ---- Currently, the MAC address for the Netgear R6120 is read from the NVRAM partition. The offset for the MAC address however is not consistent across devices or firmware versions. Switch to using the factory partition like all other Netgear devices do. ---- The LAN ports of the R6120 are labled in reverse on the casing. Adjust LuCI switchport numbering accordingly. ---- The WiFi eeprom offsets for the R6120 are currently wrong (5GHz offset is bigger than the partition itself). Fixes poor performance on 2.4 and 5 GHz. Signed-off-by: David Bauer <mail@david-bauer.net>		2019-02-14 16:56:14 +01:00
..
board.d	ramips: various Netgear R6120 fixes	2019-02-14 16:56:14 +01:00
hotplug.d	ramips: add support for DLINK DWR-922-E2	2018-12-29 16:03:30 +01:00
init.d	ramips: move wifi related interrupts off the main core on SMP systems	2019-01-29 11:27:02 +01:00
uci-defaults	ramips: use generic board detection for D-Link DAP-1522 A1	2018-02-20 19:25:17 +01:00
inittab	image / basefiles: make console password configurable	2016-04-18 21:53:07 +02:00