openwrt/target/linux/kirkwood/patches-6.1/114-ctera-c-200-v1.patch
Pawel Dembicki 5b14a352d9 kirkwood: backport fix Ctera C200 V1 ubi part name to 6.1
From the original Patch:
|In 749237967a downstream dts was replaced with upstream accepted
|patch. But in upstream version last partition was called "rootfs"
|instead "ubi". OpenWrt require "ubi" label for ubi rootfs.
|This patch restore proper label.
|
|Fixes: 749237967a ("kirkwood: Replace dtses with upstream accepted")
|
|Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
(patch  updated to include 6.1, dropped label properties)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2023-12-15 17:59:35 +01:00

59 lines
1.3 KiB
Diff

--- a/arch/arm/boot/dts/kirkwood-c200-v1.dts
+++ b/arch/arm/boot/dts/kirkwood-c200-v1.dts
@@ -14,6 +14,14 @@
model = "Ctera C200 V1";
compatible = "ctera,c200-v1", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+ aliases {
+ led-boot = &led_status_green;
+ led-failsafe = &led_status_red;
+ led-running = &led_status_green;
+ led-upgrade = &led_status_red;
+ };
+
chosen {
bootargs = "console=ttyS0,115200";
stdout-path = &uart0;
@@ -78,6 +86,7 @@
function-enumerator = <1>;
color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "ata1";
};
led-2 {
@@ -85,6 +94,7 @@
function-enumerator = <2>;
color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "ata2";
};
led-3 {
@@ -94,13 +104,13 @@
gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
};
- led-4 {
+ led_status_red: led-4 {
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_RED>;
gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
};
- led-5 {
+ led_status_green: led-5 {
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
@@ -240,7 +250,7 @@
};
partition@7a00000 {
- label = "rootfs";
+ label = "ubi";
reg = <0x7a00000 0x8600000>;
};
};