Jan-Niklas Burfeind 6cd1035d8d ramips: add support for Wavlink WS-WN572HP3 4G ... Wavlink WS-WN572HP3 4G is an 802.11ac dual-band outdoor router with LTE support. Specifications; * Soc: MT7621DAT * RAM: 128MiB * Flash: NOR 16MiB GD-25Q128ESIG3 * Wi-Fi: * MT7613BEN: 5GHz * MT7603EN: 2.4GHz * Ethernet: 2x 1GbE * USB: None - only used internally * LTE Modem: Quectel EC200T-EU * UART: 115200 baud * LEDs: * 7 blue at the front * 1 Power * 2 LAN / WAN * 1 Status * 3 RSSI (annotated 4G) * 1 green at the bottom (4G LED) * Buttons: 1 reset button Installation: * press and hold the reset button while powering on the device * keep it pressed for ten seconds * connect to 192.168.10.1 via webbrowser (chromium/chrome works, at least Firefox 106.0.3 does not) * upload the sysupgrade image, confirm the checksum, wait 2 minutes until the device reboots Revert to stock firmware: * same as installation but use the recovery image for WL-WN572HP3 Signed-off-by: Jan-Niklas Burfeind <git@aiyionpri.me> Acked-by: Arınç ÜNAL <arinc.unal@arinc9.com> (cherry picked from commit dce66899bf)		2022-12-09 00:19:44 +01:00
..
base-files	ramips: add support for Wavlink WS-WN572HP3 4G	2022-12-09 00:19:44 +01:00
config-5.10	kernel: mtd: backport SafeLoader parser	2022-10-27 12:34:19 +02:00
target.mk	mt7621: mikrotik: use vmlinuz (zBoot ELF)	2020-10-29 21:35:03 +08:00