ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-27 09:12:39 +00:00
Code Issues Actions 4 Packages Projects Releases Wiki Activity
7ae0f74bcd
openwrt/target/linux/layerscape/patches-5.4/302-dts-0007-arm64-dts-ls1043a-accumulated-change-for-ls1043a-boa.patch
Hauke Mehrtens 3da861ccca kernel: bump 5.4 to 5.4.111 
Refreshed all patches.

The following patches were manually changed:
* 610-netfilter_match_bypass_default_checks.patch
* 611-netfilter_match_bypass_default_table.patch
* 802-can-0002-can-rx-offload-fix-long-lines.patch
* 802-can-0003-can-rx-offload-can_rx_offload_compare-fix-typo.patch
* 802-can-0004-can-rx-offload-can_rx_offload_irq_offload_timestamp-.patch
* 802-can-0005-can-rx-offload-can_rx_offload_reset-remove-no-op-fun.patch
* 802-can-0006-can-rx-offload-Prepare-for-CAN-FD-support.patch
* 802-can-0018-can-flexcan-use-struct-canfd_frame-for-CAN-classic-f.patch

The can-dev.ko model was moved in the upstream kernel.

Compile-tested on: x86/64, armvirt/64, ath79/generic
Runtime-tested on: x86/64, armvirt/64, ath79/generic

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2021-04-11 17:35:12 +02:00

575 lines
14 KiB
Diff
Raw Blame History

From 794b9e55c77bf0ef34dfdb3b151a845c004b3ce3 Mon Sep 17 00:00:00 2001
From: Li Yang <leoyang.li@nxp.com>
Date: Thu, 2 May 2019 16:01:01 -0500
Subject: [PATCH] arm64: dts: ls1043a: accumulated change for ls1043a boards
commit 118e2f48ee8da3f5547c24888bd6fdb78f03b7ce
Author: Peng Ma <peng.ma@nxp.com>
Date: Wed Jul 25 08:53:07 2018 +0000
dts: fsl-ls1021a, fsl-ls1043a, fsl-ls1046a: add multi block node
support
add block-offset to support different virtual block offset for qdma
base on soc;
the interrupt named "qdma-queueN(N:0,1,2,3)" correspond to a virtual
block,N based on block number of qdma;
Signed-off-by: Peng Ma <peng.ma@nxp.com>
Author: Zhang Ying-22455 <ying.zhang22455@nxp.com>
Date: Mon Apr 2 16:22:40 2018 +0800
arm64: dts: ls1043a: add dts entry for A-010650
Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
commit a47e4bd0b5d076feb6d81601c16d5b79e53a92c8
Author: Rajesh Bhagat <rajesh.bhagat@freescale.com>
Date: Wed Jan 27 11:37:25 2016 +0530
arm64: dts: ls1043a: Add configure-gfladj property to USB3 node
Add "configure-gfladj" boolean property to USB3 node. This property
is used to determine whether frame length adjustent is required
or not
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
commit 38566bbd5ca6747b30d2f0c251bbcfe0723df8c6
Author: Changming Huang <jerry.huang@nxp.com>
Date: Wed Apr 19 12:49:50 2017 +0800
arm/arm64: dts: Add property snps incr burst type adjustment for
INCR burst type for dwc3
Signed-off-by: yinbo.zhu <yinbo.zhu@nxp.com>
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
commit 8632d84e0fe187aa023a24f0dad0040c53e12450
Author: Abhimanyu Saini <abhimanyu.saini@nxp.com>
Date: Thu Jan 25 11:31:13 2018 +0530
arm64: dts: freescale: ls1043a: Modify DT nodes for qspi
Signed-off-by: Abhimanyu Saini <abhimanyu.saini@nxp.com>
commit b1dc1ebed79e9aaab75fd06837d794ec2f1b624d
Author: Ran Wang <ran.wang_1@nxp.com>
Date: Fri Jan 5 15:14:48 2018 +0800
arm64: dts: ls1043a: Enable usb3-lpm-capable for usb3 node
Enable USB3 HW LPM feature for ls1043a and active patch for
snps erratum A-010131. It will disable U1/U2 temperary when
initiate U3 request.
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
commit 9b17a5fcf8da5656ff99ebef3d63ba040e9f676d
Author: Zhang Ying-22455 <ying.zhang22455@nxp.com>
Date: Tue Jun 13 13:14:26 2017 +0800
arm64: dts: correct the register range of dcfg
Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
commit f60e39fd51ad702e3a2613faaca40871a4763735
Author: Zhang Ying-22455 <ying.zhang22455@nxp.com>
Date: Tue Aug 22 18:04:02 2017 +0800
arm64: dts: ls1043a: add pcf85263 rtc nodes
Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
commit 67c82e3c7b376139d7cee624589bedbc311f8868
Author: jiaheng.fan <jiaheng.fan@nxp.com>
Date: Thu May 11 17:36:33 2017 +0800
arm64: dts: ls1021/ls1043/ls1046: add qdma nodes
Signed-off-by: jiaheng.fan <jiaheng.fan@nxp.com>
commit c6d9c2498ee83669f9853100301edff9a5905caf
Author: Wang Dongsheng <dongsheng.wang@nxp.com>
Date: Fri Apr 21 13:26:07 2017 +0800
arm64: dts: ls1043a: add ftm0 nodes
Add rcpm and ftm0 nodes. The Power Management related features
need these nodes.
Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
commit 3bcdc4de0a1c9e6f4a4ddc916e8efe8044d8bbfd
Author: Po Liu <po.liu@nxp.com>
Date: Fri Sep 30 17:11:36 2016 +0800
arm64: dts: ls1043/ls2080: add pcie aer/pme interrupt-name property
Some platforms(NXP Layerscape for example) aer/pme interrupts was
not
MSI/MSI-X/INTx but using interrupt line independently. This patch
add "aer", "pme" interrupt-names for aer/pme interrupt.
With the interrupt-names "aer", "pme" code could probe aer/pme
interrupt
line for pcie root port, replace the aer/pme interrupt service irqs.
This is intend to fixup the Layerscape platforms which aer/pmes
interrupts
was not MSI/MSI-X/INTx, but using interrupt line independently.
Since the interrupt-names "intr" never been used. Remove it.
Signed-off-by: Po Liu <po.liu@nxp.com>
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
commit 4d20ecf029f1255520b30c103e1724c618b981c7
Author: Zhao Qiang <qiang.zhao@nxp.com>
Date: Sun Jun 12 15:51:44 2016 +0800
arm64: dts: ls1043ardb: add ds26522 node
add ds26522 node to fsl-ls1043a-rdb.dts
Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
commit ca470562646ab058814fc4a1195016fb3266cdf5
Author: Zhao Qiang <qiang.zhao@nxp.com>
Date: Sun Jun 12 15:44:11 2016 +0800
arm64: dts: ls1043ardb: add qe node
Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
---
arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts | 162 ++++++++++++++++++++++
arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts | 36 +++++
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 108 +++++++++++++--
3 files changed, 295 insertions(+), 11 deletions(-)
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
@@ -24,6 +24,22 @@
serial1 = &duart1;
serial2 = &duart2;
serial3 = &duart3;
+ sgmii_riser_s1_p1 = &sgmii_phy_s1_p1;
+ sgmii_riser_s2_p1 = &sgmii_phy_s2_p1;
+ sgmii_riser_s3_p1 = &sgmii_phy_s3_p1;
+ sgmii_riser_s4_p1 = &sgmii_phy_s4_p1;
+ qsgmii_s1_p1 = &qsgmii_phy_s1_p1;
+ qsgmii_s1_p2 = &qsgmii_phy_s1_p2;
+ qsgmii_s1_p3 = &qsgmii_phy_s1_p3;
+ qsgmii_s1_p4 = &qsgmii_phy_s1_p4;
+ qsgmii_s2_p1 = &qsgmii_phy_s2_p1;
+ qsgmii_s2_p2 = &qsgmii_phy_s2_p2;
+ qsgmii_s2_p3 = &qsgmii_phy_s2_p3;
+ qsgmii_s2_p4 = &qsgmii_phy_s2_p4;
+ emi1_slot1 = &ls1043mdio_s1;
+ emi1_slot2 = &ls1043mdio_s2;
+ emi1_slot3 = &ls1043mdio_s3;
+ emi1_slot4 = &ls1043mdio_s4;
};
chosen {
@@ -64,6 +80,8 @@
fpga: board-control@2,0 {
compatible = "fsl,ls1043aqds-fpga", "fsl,fpga-qixis";
reg = <0x2 0x0 0x0000100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
};
};
@@ -149,3 +167,147 @@
};
#include "fsl-ls1043-post.dtsi"
+
+&fman0 {
+ ethernet@e0000 {
+ phy-handle = <&qsgmii_phy_s2_p1>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e2000 {
+ phy-handle = <&qsgmii_phy_s2_p2>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@e4000 {
+ phy-handle = <&rgmii_phy1>;
+ phy-connection-type = "rgmii";
+ };
+
+ ethernet@e6000 {
+ phy-handle = <&rgmii_phy2>;
+ phy-connection-type = "rgmii";
+ };
+
+ ethernet@e8000 {
+ phy-handle = <&qsgmii_phy_s2_p3>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@ea000 {
+ phy-handle = <&qsgmii_phy_s2_p4>;
+ phy-connection-type = "sgmii";
+ };
+
+ ethernet@f0000 { /* DTSEC9/10GEC1 */
+ fixed-link = <1 1 10000 0 0>;
+ phy-connection-type = "xgmii";
+ };
+};
+
+&fpga {
+ mdio-mux-emi1 {
+ compatible = "mdio-mux-mmioreg", "mdio-mux";
+ mdio-parent-bus = <&mdio0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x54 1>; /* BRDCFG4 */
+ mux-mask = <0xe0>; /* EMI1 */
+
+ /* On-board RGMII1 PHY */
+ ls1043mdio0: mdio@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rgmii_phy1: ethernet-phy@1 { /* MAC3 */
+ reg = <0x1>;
+ };
+ };
+
+ /* On-board RGMII2 PHY */
+ ls1043mdio1: mdio@1 {
+ reg = <0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rgmii_phy2: ethernet-phy@2 { /* MAC4 */
+ reg = <0x2>;
+ };
+ };
+
+ /* Slot 1 */
+ ls1043mdio_s1: mdio@2 {
+ reg = <0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ qsgmii_phy_s1_p1: ethernet-phy@4 {
+ reg = <0x4>;
+ };
+ qsgmii_phy_s1_p2: ethernet-phy@5 {
+ reg = <0x5>;
+ };
+ qsgmii_phy_s1_p3: ethernet-phy@6 {
+ reg = <0x6>;
+ };
+ qsgmii_phy_s1_p4: ethernet-phy@7 {
+ reg = <0x7>;
+ };
+
+ sgmii_phy_s1_p1: ethernet-phy@1c {
+ reg = <0x1c>;
+ };
+ };
+
+ /* Slot 2 */
+ ls1043mdio_s2: mdio@3 {
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ qsgmii_phy_s2_p1: ethernet-phy@8 {
+ reg = <0x8>;
+ };
+ qsgmii_phy_s2_p2: ethernet-phy@9 {
+ reg = <0x9>;
+ };
+ qsgmii_phy_s2_p3: ethernet-phy@a {
+ reg = <0xa>;
+ };
+ qsgmii_phy_s2_p4: ethernet-phy@b {
+ reg = <0xb>;
+ };
+
+ sgmii_phy_s2_p1: ethernet-phy@1c {
+ reg = <0x1c>;
+ };
+ };
+
+ /* Slot 3 */
+ ls1043mdio_s3: mdio@4 {
+ reg = <0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sgmii_phy_s3_p1: ethernet-phy@1c {
+ reg = <0x1c>;
+ };
+ };
+
+ /* Slot 4 */
+ ls1043mdio_s4: mdio@5 {
+ reg = <0xa0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sgmii_phy_s4_p1: ethernet-phy@1c {
+ reg = <0x1c>;
+ };
+ };
+ };
+};
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
@@ -49,6 +49,10 @@
compatible = "pericom,pt7c4338";
reg = <0x68>;
};
+ rtc@51 {
+ compatible = "nxp,pcf85263";
+ reg = <0x51>;
+ };
};
&ifc {
@@ -94,6 +98,38 @@
reg = <0>;
spi-max-frequency = <1000000>; /* input clock */
};
+
+ slic@2 {
+ compatible = "maxim,ds26522";
+ reg = <2>;
+ spi-max-frequency = <2000000>;
+ fsl,spi-cs-sck-delay = <100>;
+ fsl,spi-sck-cs-delay = <50>;
+ };
+
+ slic@3 {
+ compatible = "maxim,ds26522";
+ reg = <3>;
+ spi-max-frequency = <2000000>;
+ fsl,spi-cs-sck-delay = <100>;
+ fsl,spi-sck-cs-delay = <50>;
+ };
+};
+
+&uqe {
+ ucc_hdlc: ucc@2000 {
+ compatible = "fsl,ucc-hdlc";
+ rx-clock-name = "clk8";
+ tx-clock-name = "clk9";
+ fsl,rx-sync-clock = "rsync_pin";
+ fsl,tx-sync-clock = "tsync_pin";
+ fsl,tx-timeslot-mask = <0xfffffffe>;
+ fsl,rx-timeslot-mask = <0xfffffffe>;
+ fsl,tdm-framer-type = "e1";
+ fsl,tdm-id = <0>;
+ fsl,siram-entry-id = <0>;
+ fsl,tdm-interface;
+ };
};
&duart0 {
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -278,7 +278,7 @@
dcfg: dcfg@1ee0000 {
compatible = "fsl,ls1043a-dcfg", "syscon";
- reg = <0x0 0x1ee0000 0x0 0x10000>;
+ reg = <0x0 0x1ee0000 0x0 0x1000>;
big-endian;
};
@@ -412,7 +412,7 @@
};
i2c0: i2c@2180000 {
- compatible = "fsl,vf610-i2c";
+ compatible = "fsl,vf610-i2c", "fsl,ls1043a-vf610-i2c";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x2180000 0x0 0x10000>;
@@ -422,6 +422,7 @@
dmas = <&edma0 1 39>,
<&edma0 1 38>;
dma-names = "tx", "rx";
+ scl-gpios = <&gpio4 12 0>;
status = "disabled";
};
@@ -526,6 +527,72 @@
#interrupt-cells = <2>;
};
+ uqe: uqe@2400000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "qe";
+ compatible = "fsl,qe", "simple-bus";
+ ranges = <0x0 0x0 0x2400000 0x40000>;
+ reg = <0x0 0x2400000 0x0 0x480>;
+ brg-frequency = <100000000>;
+ bus-frequency = <200000000>;
+
+ fsl,qe-num-riscs = <1>;
+ fsl,qe-num-snums = <28>;
+
+ qeic: qeic@80 {
+ compatible = "fsl,qe-ic";
+ reg = <0x80 0x80>;
+ #address-cells = <0>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupts = <0 77 0x04 0 77 0x04>;
+ };
+
+ si1: si@700 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,ls1043-qe-si",
+ "fsl,t1040-qe-si";
+ reg = <0x700 0x80>;
+ };
+
+ siram1: siram@1000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,ls1043-qe-siram",
+ "fsl,t1040-qe-siram";
+ reg = <0x1000 0x800>;
+ };
+
+ ucc@2000 {
+ cell-index = <1>;
+ reg = <0x2000 0x200>;
+ interrupts = <32>;
+ interrupt-parent = <&qeic>;
+ };
+
+ ucc@2200 {
+ cell-index = <3>;
+ reg = <0x2200 0x200>;
+ interrupts = <34>;
+ interrupt-parent = <&qeic>;
+ };
+
+ muram@10000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,qe-muram", "fsl,cpm-muram";
+ ranges = <0x0 0x10000 0x6000>;
+
+ data-only@0 {
+ compatible = "fsl,qe-muram-data",
+ "fsl,cpm-muram-data";
+ reg = <0x0 0x6000>;
+ };
+ };
+ };
+
lpuart0: serial@2950000 {
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2950000 0x0 0x1000>;
@@ -580,6 +647,16 @@
status = "disabled";
};
+ ftm0: ftm0@29d0000 {
+ compatible = "fsl,ftm-alarm";
+ reg = <0x0 0x29d0000 0x0 0x10000>,
+ <0x0 0x1ee2140 0x0 0x4>;
+ reg-names = "ftm", "FlexTimer1";
+ interrupts = <0 86 0x4>;
+ big-endian;
+ status = "okay";
+ };
+
wdog0: wdog@2ad0000 {
compatible = "fsl,ls1043a-wdt", "fsl,imx21-wdt";
reg = <0x0 0x2ad0000 0x0 0x10000>;
@@ -612,7 +689,10 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
+ usb3-lpm-capable;
+ snps,dis-u1u2-when-u3-quirk;
snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+ configure-gfladj;
};
usb1: usb3@3000000 {
@@ -622,7 +702,10 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
+ usb3-lpm-capable;
+ snps,dis-u1u2-when-u3-quirk;
snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+ configure-gfladj;
};
usb2: usb3@3100000 {
@@ -632,7 +715,10 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
+ usb3-lpm-capable;
+ snps,dis-u1u2-when-u3-quirk;
snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+ configure-gfladj;
};
sata: sata@3200000 {
@@ -671,9 +757,9 @@
reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */
0x40 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
- interrupts = <0 118 0x4>, /* controller interrupt */
- <0 117 0x4>; /* PME interrupt */
- interrupt-names = "intr", "pme";
+ interrupts = <0 117 0x4>, /* PME interrupt */
+ <0 118 0x4>; /* aer interrupt */
+ interrupt-names = "pme", "aer";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
@@ -697,9 +783,9 @@
reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */
0x48 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
- interrupts = <0 128 0x4>,
- <0 127 0x4>;
- interrupt-names = "intr", "pme";
+ interrupts = <0 127 0x4>,
+ <0 128 0x4>;
+ interrupt-names = "pme", "aer";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
@@ -723,9 +809,9 @@
reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */
0x50 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
- interrupts = <0 162 0x4>,
- <0 161 0x4>;
- interrupt-names = "intr", "pme";
+ interrupts = <0 161 0x4>,
+ <0 162 0x4>;
+ interrupt-names = "pme", "aer";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
Reference in New Issue View Git Blame Copy Permalink