mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-29 10:08:59 +00:00
02629d8f87
Targets were build tested and patches are refreshed. Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 42463
127 lines
4.1 KiB
Diff
127 lines
4.1 KiB
Diff
From 5a58dbf4d82c29f7e6d89abc3520bed1aa2af05c Mon Sep 17 00:00:00 2001
|
|
From: Andy Gross <agross@codeaurora.org>
|
|
Date: Thu, 24 Apr 2014 11:31:20 -0500
|
|
Subject: [PATCH 088/182] soc: qcom: Add device tree binding for GSBI
|
|
|
|
Add device tree binding support for the QCOM GSBI driver.
|
|
|
|
Signed-off-by: Andy Gross <agross@codeaurora.org>
|
|
Signed-off-by: Kumar Gala <galak@codeaurora.org>
|
|
---
|
|
.../devicetree/bindings/soc/qcom/qcom,gsbi.txt | 78 ++++++++++++++++++++
|
|
include/dt-bindings/soc/qcom,gsbi.h | 26 +++++++
|
|
2 files changed, 104 insertions(+)
|
|
create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt
|
|
create mode 100644 include/dt-bindings/soc/qcom,gsbi.h
|
|
|
|
--- /dev/null
|
|
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt
|
|
@@ -0,0 +1,78 @@
|
|
+QCOM GSBI (General Serial Bus Interface) Driver
|
|
+
|
|
+The GSBI controller is modeled as a node with zero or more child nodes, each
|
|
+representing a serial sub-node device that is mux'd as part of the GSBI
|
|
+configuration settings. The mode setting will govern the input/output mode of
|
|
+the 4 GSBI IOs.
|
|
+
|
|
+Required properties:
|
|
+- compatible: must contain "qcom,gsbi-v1.0.0" for APQ8064/IPQ8064
|
|
+- reg: Address range for GSBI registers
|
|
+- clocks: required clock
|
|
+- clock-names: must contain "iface" entry
|
|
+- qcom,mode : indicates MUX value for configuration of the serial interface.
|
|
+ Please reference dt-bindings/soc/qcom,gsbi.h for valid mux values.
|
|
+
|
|
+Optional properties:
|
|
+- qcom,crci : indicates CRCI MUX value for QUP CRCI ports. Please reference
|
|
+ dt-bindings/soc/qcom,gsbi.h for valid CRCI mux values.
|
|
+
|
|
+Required properties if child node exists:
|
|
+- #address-cells: Must be 1
|
|
+- #size-cells: Must be 1
|
|
+- ranges: Must be present
|
|
+
|
|
+Properties for children:
|
|
+
|
|
+A GSBI controller node can contain 0 or more child nodes representing serial
|
|
+devices. These serial devices can be a QCOM UART, I2C controller, spi
|
|
+controller, or some combination of aforementioned devices.
|
|
+
|
|
+See the following for child node definitions:
|
|
+Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt
|
|
+Documentation/devicetree/bindings/spi/qcom,spi-qup.txt
|
|
+Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt
|
|
+
|
|
+Example for APQ8064:
|
|
+
|
|
+#include <dt-bindings/soc/qcom,gsbi.h>
|
|
+
|
|
+ gsbi4@16300000 {
|
|
+ compatible = "qcom,gsbi-v1.0.0";
|
|
+ reg = <0x16300000 0x100>;
|
|
+ clocks = <&gcc GSBI4_H_CLK>;
|
|
+ clock-names = "iface";
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <1>;
|
|
+ ranges;
|
|
+ qcom,mode = <GSBI_PROT_I2C_UART>;
|
|
+ qcom,crci = <GSBI_CRCI_QUP>;
|
|
+
|
|
+ /* child nodes go under here */
|
|
+
|
|
+ i2c_qup4: i2c@16380000 {
|
|
+ compatible = "qcom,i2c-qup-v1.1.1";
|
|
+ reg = <0x16380000 0x1000>;
|
|
+ interrupts = <0 153 0>;
|
|
+
|
|
+ clocks = <&gcc GSBI4_QUP_CLK>, <&gcc GSBI4_H_CLK>;
|
|
+ clock-names = "core", "iface";
|
|
+
|
|
+ clock-frequency = <200000>;
|
|
+
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ };
|
|
+
|
|
+ uart4: serial@16340000 {
|
|
+ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
|
|
+ reg = <0x16340000 0x1000>,
|
|
+ <0x16300000 0x1000>;
|
|
+ interrupts = <0 152 0x0>;
|
|
+ clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>;
|
|
+ clock-names = "core", "iface";
|
|
+ status = "ok";
|
|
+ };
|
|
+ };
|
|
+
|
|
--- /dev/null
|
|
+++ b/include/dt-bindings/soc/qcom,gsbi.h
|
|
@@ -0,0 +1,26 @@
|
|
+/* Copyright (c) 2013, The Linux Foundation. All rights reserved.
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License version 2 and
|
|
+ * only version 2 as published by the Free Software Foundation.
|
|
+ *
|
|
+ * This program is distributed in the hope that it will be useful,
|
|
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
+ * GNU General Public License for more details.
|
|
+ */
|
|
+#ifndef __DT_BINDINGS_QCOM_GSBI_H
|
|
+#define __DT_BINDINGS_QCOM_GSBI_H
|
|
+
|
|
+#define GSBI_PROT_IDLE 0
|
|
+#define GSBI_PROT_I2C_UIM 1
|
|
+#define GSBI_PROT_I2C 2
|
|
+#define GSBI_PROT_SPI 3
|
|
+#define GSBI_PROT_UART_W_FC 4
|
|
+#define GSBI_PROT_UIM 5
|
|
+#define GSBI_PROT_I2C_UART 6
|
|
+
|
|
+#define GSBI_CRCI_QUP 0
|
|
+#define GSBI_CRCI_UART 1
|
|
+
|
|
+#endif
|