Sander Vanheule 7a875d155e ath79: prepare for 1-port TP-Link EAP2x5 devices ... TP-Link has developed a number of access points based on the AP152 reference board. In the EAP-series of 802.11ac access points, this includes the following devices with one ethernet port: * EAP225 v1/v2 * EAP225 v3 * EAP225-Outdoor v1 * EAP245 v1 Since the only differences between these devices are the ath10k wireless radios and LEDs, a common base is provided for the overlapping support requirements. Hardware commonalities: * SoC: QCA9563-AL3A MIPS 74kc v5.0 @ 775MHz, AHB @ 258MHz * RAM: 128MiB DDR2 @ 650MHz * Flash: 16MiB SPI NOR * Wi-Fi 2.4GHz: provided by SoC * Wi-Fi 5Ghz: ath10k chip on PCIe * Ethernet: AR8033-AL1A, one 1GbE port (802.3at PoE) Signed-off-by: Sander Vanheule <sander@svanheule.net>		2020-11-23 22:53:15 +01:00
..
base-files/etc/hotplug.d/ieee80211	ath79: add WiFi migration for AR913x	2020-09-28 16:23:03 +02:00
dts	ath79: prepare for 1-port TP-Link EAP2x5 devices	2020-11-23 22:53:15 +01:00
files	ath79: add QCA956x SERDES init workaround	2020-11-23 22:53:15 +01:00
generic	ath79: move the squashfs feature to the parent target	2020-11-23 13:20:53 +01:00
image	ath79: add support for ALFA Network Pi-WiFi4	2020-11-18 23:49:34 +01:00
mikrotik	ath79: move the squashfs feature to the parent target	2020-11-23 13:20:53 +01:00
nand	ath79: move the squashfs feature to the parent target	2020-11-23 13:20:53 +01:00
patches-5.4	ath79: drop upstreamed patch	2020-11-01 15:29:06 +01:00
tiny	ath79: move the squashfs feature to the parent target	2020-11-23 13:20:53 +01:00
config-5.4	ath79: enable elf mtd splitter	2020-09-09 20:41:50 +03:00
Makefile	ath79: move the squashfs feature to the parent target	2020-11-23 13:20:53 +01:00
modules.mk