openwrt/target/linux/ar71xx/patches-4.9/435-spi-vsc7385_driver.patch
Hauke Mehrtens 7bbf4117c6 ar71xx: Add kernel 4.9 support
This add support for kernel 4.9 to the ar71xx target.
It was compile tested with the generic, NAND and mikrotik subtarget.
Multiple members of the community tested it on their boards and did not
report any major problem so far.

Especially the NAND part received some changes to adapt to the new
kernel APIs. The serial driver hack used for the Arduino Yun was not
ported because the kernel changed there a lot.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-10-11 22:32:39 +02:00

25 lines
814 B
Diff

--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -768,6 +768,11 @@ config SPI_RB4XX_CPLD
SPI driver for the Xilinx CPLD chip present on the
MikroTik RB4xx boards.
+config SPI_VSC7385
+ tristate "Vitesse VSC7385 ethernet switch driver"
+ help
+ SPI driver for the Vitesse VSC7385 ethernet switch.
+
#
# Add new SPI protocol masters in alphabetical order above this line
#
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -99,6 +99,7 @@ spi-thunderx-objs := spi-cavium.o spi-
obj-$(CONFIG_SPI_THUNDERX) += spi-thunderx.o
obj-$(CONFIG_SPI_TOPCLIFF_PCH) += spi-topcliff-pch.o
obj-$(CONFIG_SPI_TXX9) += spi-txx9.o
+obj-$(CONFIG_SPI_VSC7385) += spi-vsc7385.o
obj-$(CONFIG_SPI_XCOMM) += spi-xcomm.o
obj-$(CONFIG_SPI_XILINX) += spi-xilinx.o
obj-$(CONFIG_SPI_XLP) += spi-xlp.o