openwrt/target/linux/ramips
Chuanhong Guo 7950e1b9f4 ramips: Add support for Phicomm K2G
Specification:
- SoC: MediaTek MT7620A
- Flash: 8 MB
- RAM: 64 MB
- Ethernet: 4 FE ports and 1 GE port (RTL8211F on port 5)
- Wireless radio: MT7620 for 2.4G and MT7612E for 5G, both equipped with external PA.
- UART: 1 x UART on PCB - 57600 8N1

Flash instruction:
The U-boot is based on Ralink SDK so we can flash the firmware using UART:
1. Configure PC with a static IP address and setup an TFTP server.
2. Put the firmware into the tftp directory.
3. Connect the UART line as described on the PCB.
4. Power up the device and press 2, follow the instruction to
   set device and tftp server IP address and input the firmware
   file name. U-boot will then load the firmware and write it into
   the flash.

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2018-06-21 22:01:33 +02:00
..
base-files ramips: Add support for Phicomm K2G 2018-06-21 22:01:33 +02:00
dts ramips: Add support for Phicomm K2G 2018-06-21 22:01:33 +02:00
files-4.14/drivers Revert "ramips: Move PCI driver to files directory" 2018-06-01 21:03:27 +02:00
image ramips: Add support for Phicomm K2G 2018-06-21 22:01:33 +02:00
mt76x8 kernel: enable THIN_ARCHIVES by default 2018-05-24 17:24:31 +02:00
mt7620 kernel: enable THIN_ARCHIVES by default 2018-05-24 17:24:31 +02:00
mt7621 ramips: Add support for Mikrotik RouterBOARD RBM33g 2018-06-21 06:55:10 +02:00
patches-4.14 kernel: bump 4.14 to 4.14.48 for 18.06 2018-06-07 09:03:24 +02:00
rt288x kernel: enable THIN_ARCHIVES by default 2018-05-24 17:24:31 +02:00
rt305x ramips: add dwr-512 jboot firmware configuration 2018-04-08 09:51:06 +02:00
rt3883 kernel: enable THIN_ARCHIVES by default 2018-05-24 17:24:31 +02:00
Makefile ramips: switch to linux 4.14 2018-04-06 18:07:43 +02:00
modules.mk ramips: rename pwm kernel module 2018-04-08 12:35:33 +02:00