mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-28 01:28:59 +00:00
f07e572f64
bcm2708: boot tested on RPi B+ v1.2 bcm2709: boot tested on RPi 3B v1.2 and RPi 4B v1.1 4G bcm2710: boot tested on RPi 3B v1.2 bcm2711: boot tested on RPi 4B v1.1 4G Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
284 lines
7.1 KiB
Diff
284 lines
7.1 KiB
Diff
From c46a59c99e53ab41096afcf7f7879bb12769346b Mon Sep 17 00:00:00 2001
|
|
From: Maxim Mikityanskiy <maxtram95@gmail.com>
|
|
Date: Sat, 27 Jun 2020 13:08:26 +0300
|
|
Subject: [PATCH] ARM: dts: Add Bluetooth nodes for Raspberry Pi
|
|
|
|
Add device tree nodes for Bluetooth on supported Raspberry Pi boards.
|
|
It's disabled by default and can be enabled by `krnbt=on` dtparam. It's
|
|
an alternative way of configuring Bluetooth, as compared to hciattach or
|
|
btattach. When the dtparam is enabled, the Bluetooth driver is probed
|
|
automatically and doesn't require any additional bring-up scripts.
|
|
|
|
Note that Raspberry Pi 3 B rev 1.2 doesn't have the required hardware
|
|
flow control pins of UART0 connected to the Bluetooth module, so the
|
|
user should decrease the baudrate by passing `krnbt_baudrate=921600`
|
|
dtparam to make it more stable. It resembles the behavior of the btuart
|
|
script from Raspbian.
|
|
|
|
The miniuart-bt overlay was modified to support Bluetooth probing with
|
|
device tree, too. It's disabled by default and can be enabled by
|
|
`krnbt=on` parameter of the miniuart-bt overlay.
|
|
|
|
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
|
|
---
|
|
arch/arm/boot/dts/bcm2708-rpi-bt.dtsi | 26 +++++++++++++++++++
|
|
arch/arm/boot/dts/bcm2708-rpi-zero-w.dts | 1 +
|
|
arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts | 1 +
|
|
arch/arm/boot/dts/bcm2710-rpi-3-b.dts | 1 +
|
|
arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 3 +--
|
|
arch/arm/boot/dts/bcm271x-rpi-bt.dtsi | 26 +++++++++++++++++++
|
|
arch/arm/boot/dts/overlays/README | 12 +++++++--
|
|
.../boot/dts/overlays/disable-bt-overlay.dts | 13 ++++++++--
|
|
.../boot/dts/overlays/miniuart-bt-overlay.dts | 21 ++++++++++++---
|
|
9 files changed, 94 insertions(+), 10 deletions(-)
|
|
create mode 100644 arch/arm/boot/dts/bcm2708-rpi-bt.dtsi
|
|
create mode 100644 arch/arm/boot/dts/bcm271x-rpi-bt.dtsi
|
|
|
|
--- /dev/null
|
|
+++ b/arch/arm/boot/dts/bcm2708-rpi-bt.dtsi
|
|
@@ -0,0 +1,26 @@
|
|
+// SPDX-License-Identifier: GPL-2.0
|
|
+
|
|
+&uart0 {
|
|
+ bt: bluetooth {
|
|
+ compatible = "brcm,bcm43438-bt";
|
|
+ max-speed = <3000000>;
|
|
+ shutdown-gpios = <&gpio 45 GPIO_ACTIVE_HIGH>;
|
|
+ status = "disabled";
|
|
+ };
|
|
+};
|
|
+
|
|
+&uart1 {
|
|
+ minibt: bluetooth {
|
|
+ compatible = "brcm,bcm43438-bt";
|
|
+ max-speed = <460800>;
|
|
+ shutdown-gpios = <&gpio 45 GPIO_ACTIVE_HIGH>;
|
|
+ status = "disabled";
|
|
+ };
|
|
+};
|
|
+
|
|
+/ {
|
|
+ __overrides__ {
|
|
+ krnbt = <&bt>,"status";
|
|
+ krnbt_baudrate = <&bt>,"max-speed:0";
|
|
+ };
|
|
+};
|
|
--- a/arch/arm/boot/dts/bcm2708-rpi-zero-w.dts
|
|
+++ b/arch/arm/boot/dts/bcm2708-rpi-zero-w.dts
|
|
@@ -4,6 +4,7 @@
|
|
#include "bcm2708-rpi.dtsi"
|
|
#include "bcm283x-rpi-csi1-2lane.dtsi"
|
|
#include "bcm283x-rpi-i2c0mux_0_28.dtsi"
|
|
+#include "bcm2708-rpi-bt.dtsi"
|
|
|
|
/ {
|
|
compatible = "raspberrypi,model-zero-w", "brcm,bcm2835";
|
|
--- a/arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts
|
|
+++ b/arch/arm/boot/dts/bcm2710-rpi-3-b-plus.dts
|
|
@@ -5,6 +5,7 @@
|
|
#include "bcm283x-rpi-lan7515.dtsi"
|
|
#include "bcm283x-rpi-csi1-2lane.dtsi"
|
|
#include "bcm283x-rpi-i2c0mux_0_44.dtsi"
|
|
+#include "bcm271x-rpi-bt.dtsi"
|
|
|
|
/ {
|
|
compatible = "raspberrypi,3-model-b-plus", "brcm,bcm2837";
|
|
--- a/arch/arm/boot/dts/bcm2710-rpi-3-b.dts
|
|
+++ b/arch/arm/boot/dts/bcm2710-rpi-3-b.dts
|
|
@@ -5,6 +5,7 @@
|
|
#include "bcm283x-rpi-smsc9514.dtsi"
|
|
#include "bcm283x-rpi-csi1-2lane.dtsi"
|
|
#include "bcm283x-rpi-i2c0mux_0_44.dtsi"
|
|
+#include "bcm271x-rpi-bt.dtsi"
|
|
|
|
/ {
|
|
compatible = "raspberrypi,3-model-b", "brcm,bcm2837";
|
|
--- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
|
|
+++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
|
|
@@ -182,6 +182,7 @@
|
|
// Downstream rpi- changes
|
|
|
|
#include "bcm270x.dtsi"
|
|
+#include "bcm271x-rpi-bt.dtsi"
|
|
|
|
/ {
|
|
soc {
|
|
@@ -250,8 +251,6 @@
|
|
&uart0 {
|
|
pinctrl-0 = <&uart0_pins &bt_pins>;
|
|
status = "okay";
|
|
-
|
|
- /delete-node/ bluetooth;
|
|
};
|
|
|
|
&uart1 {
|
|
--- /dev/null
|
|
+++ b/arch/arm/boot/dts/bcm271x-rpi-bt.dtsi
|
|
@@ -0,0 +1,26 @@
|
|
+// SPDX-License-Identifier: GPL-2.0
|
|
+
|
|
+&uart0 {
|
|
+ bt: bluetooth {
|
|
+ compatible = "brcm,bcm43438-bt";
|
|
+ max-speed = <3000000>;
|
|
+ shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
|
|
+ status = "disabled";
|
|
+ };
|
|
+};
|
|
+
|
|
+&uart1 {
|
|
+ minibt: bluetooth {
|
|
+ compatible = "brcm,bcm43438-bt";
|
|
+ max-speed = <460800>;
|
|
+ shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
|
|
+ status = "disabled";
|
|
+ };
|
|
+};
|
|
+
|
|
+/ {
|
|
+ __overrides__ {
|
|
+ krnbt = <&bt>,"status";
|
|
+ krnbt_baudrate = <&bt>,"max-speed:0";
|
|
+ };
|
|
+};
|
|
--- a/arch/arm/boot/dts/overlays/README
|
|
+++ b/arch/arm/boot/dts/overlays/README
|
|
@@ -162,6 +162,13 @@ Params:
|
|
i2s Set to "on" to enable the i2s interface
|
|
(default "off")
|
|
|
|
+ krnbt Set to "on" to enable autoprobing of Bluetooth
|
|
+ driver without need of hciattach/btattach
|
|
+ (default "off")
|
|
+
|
|
+ krnbt_baudrate Set the baudrate of the PL011 UART when used
|
|
+ with krnbt=on
|
|
+
|
|
spi Set to "on" to enable the spi interfaces
|
|
(default "off")
|
|
|
|
@@ -1764,8 +1771,9 @@ Info: Switch the onboard Bluetooth fun
|
|
in which case use /dev/serial1 instead because it will always be
|
|
correct. Furthermore, you must also set core_freq and core_freq_min to
|
|
the same value in config.txt or the miniuart will not work.
|
|
-Load: dtoverlay=miniuart-bt
|
|
-Params: <None>
|
|
+Load: dtoverlay=miniuart-bt,<param>=<val>
|
|
+Params: krnbt Set to "on" to enable autoprobing of Bluetooth
|
|
+ driver without need of hciattach/btattach
|
|
|
|
|
|
Name: mmc
|
|
--- a/arch/arm/boot/dts/overlays/disable-bt-overlay.dts
|
|
+++ b/arch/arm/boot/dts/overlays/disable-bt-overlay.dts
|
|
@@ -8,6 +8,8 @@
|
|
sudo systemctl disable hciuart
|
|
*/
|
|
|
|
+#include <dt-bindings/gpio/gpio.h>
|
|
+
|
|
/{
|
|
compatible = "brcm,bcm2835";
|
|
|
|
@@ -28,6 +30,13 @@
|
|
};
|
|
|
|
fragment@2 {
|
|
+ target = <&bt>;
|
|
+ __overlay__ {
|
|
+ status = "disabled";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@3 {
|
|
target = <&uart0_pins>;
|
|
__overlay__ {
|
|
brcm,pins;
|
|
@@ -36,7 +45,7 @@
|
|
};
|
|
};
|
|
|
|
- fragment@3 {
|
|
+ fragment@4 {
|
|
target = <&bt_pins>;
|
|
__overlay__ {
|
|
brcm,pins;
|
|
@@ -45,7 +54,7 @@
|
|
};
|
|
};
|
|
|
|
- fragment@4 {
|
|
+ fragment@5 {
|
|
target-path = "/aliases";
|
|
__overlay__ {
|
|
serial0 = "/soc/serial@7e201000";
|
|
--- a/arch/arm/boot/dts/overlays/miniuart-bt-overlay.dts
|
|
+++ b/arch/arm/boot/dts/overlays/miniuart-bt-overlay.dts
|
|
@@ -15,6 +15,8 @@
|
|
this overlay is used.
|
|
*/
|
|
|
|
+#include <dt-bindings/gpio/gpio.h>
|
|
+
|
|
/{
|
|
compatible = "brcm,bcm2835";
|
|
|
|
@@ -28,6 +30,13 @@
|
|
};
|
|
|
|
fragment@1 {
|
|
+ target = <&bt>;
|
|
+ __overlay__ {
|
|
+ status = "disabled";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@2 {
|
|
target = <&uart1>;
|
|
__overlay__ {
|
|
pinctrl-names = "default";
|
|
@@ -36,7 +45,7 @@
|
|
};
|
|
};
|
|
|
|
- fragment@2 {
|
|
+ fragment@3 {
|
|
target = <&uart0_pins>;
|
|
__overlay__ {
|
|
brcm,pins;
|
|
@@ -45,7 +54,7 @@
|
|
};
|
|
};
|
|
|
|
- fragment@3 {
|
|
+ fragment@4 {
|
|
target = <&uart1_pins>;
|
|
__overlay__ {
|
|
brcm,pins = <32 33>;
|
|
@@ -54,7 +63,7 @@
|
|
};
|
|
};
|
|
|
|
- fragment@4 {
|
|
+ fragment@5 {
|
|
target = <&gpio>;
|
|
__overlay__ {
|
|
fake_bt_cts: fake_bt_cts {
|
|
@@ -64,11 +73,15 @@
|
|
};
|
|
};
|
|
|
|
- fragment@5 {
|
|
+ fragment@6 {
|
|
target-path = "/aliases";
|
|
__overlay__ {
|
|
serial0 = "/soc/serial@7e201000";
|
|
serial1 = "/soc/serial@7e215040";
|
|
};
|
|
};
|
|
+
|
|
+ __overrides__ {
|
|
+ krnbt = <&minibt>,"status";
|
|
+ };
|
|
};
|