openwrt/package/boot/uboot-envtools/files
Daniel Gimpelevich f61e754522 ath79: add support for Netgear EX6400 and EX7300
This is sold as a dual-band 802.11ac range extender. It has a sliding
switch for Extender mode or Access Point mode, a WPS button, a recessed
Reset button, a hard-power button, and a multitude of LED's, some
multiplexed via an NXP 74AHC164D chip. The internal serial header pinout is
Vcc, Tx, Rx, GND, with GND closest to the corner of the board. You may
connect at 115200 bps, 8 data bits, no parity, 1 stop bit.

Specification:
- System-On-Chip: QCA9558
- CPU/Speed: 720 MHz
- Flash-Chip: Winbond 25Q128FVSG
- Flash size: 16 MiB
- RAM: 128 MiB
- Wireless No1: QCA9558 on-chip 2.4GHz 802.11bgn, 3x3
- Wireless No2: QCA99x0 chip 5GHz 802.11an+ac, 4x4
- PHY: Atheros AR8035-A

Installation:
If you can get to the stock firmware's firmware upgrade option, just feed
it the factory.img and boot as usual. As an alternative, TFTP the
factory.img to the bootloader.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
[whitespace fix in DTS and reorder of make variables]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-04-09 11:09:26 +02:00
..
apm821xx apm821xx: add support for the Netgear WNDAP620 and WNDAP660 2018-11-26 12:05:46 +01:00
ar71xx uboot-envtools: Add domywifi dw33d support 2019-01-02 22:24:52 +01:00
ath79 ath79: add support for Netgear EX6400 and EX7300 2019-04-09 11:09:26 +02:00
cns3xxx treewide: use the generic board_name function 2017-07-15 23:13:34 +02:00
imx6 uboot-envtools: imx6: Add support for Toradex Apalis board family 2019-04-08 18:37:03 +02:00
ipq40xx uboot-envtools: add support for ALFA Network AP120C-AC 2019-02-26 00:16:22 +01:00
ipq806x uboot-envtools: adds r7800 uboot env support 2018-10-07 02:12:06 +02:00
kirkwood kirkwood: add support for Iomega Storcenter ix2-200 2018-07-30 15:21:00 +02:00
lantiq lantiq: use the compatible string as board name 2017-12-16 23:33:56 +01:00
layerscape uboot-envtools: add configuration for Traverse LS1043 boards. 2018-07-30 10:53:57 +02:00
mpc85xx mpc85xx: add support for OCEDO Panda 2019-01-26 17:10:19 +01:00
mvebu mvebu: add support for WRT32X (venom) 2018-05-14 17:20:10 +02:00
mxs uboot-envtools: fix configuration for I2SE Duckbills 2018-12-18 20:17:22 +01:00
oxnas uboot-envtools: oxnas: sync with current oxnas/ox820 DTS 2019-03-01 03:36:53 +01:00
pistachio pistachio: remove custom board detection override 2017-03-22 11:43:22 +01:00
ramips ramips: Xiaomi MIR3G: detect board name from DTS 2019-03-21 00:57:54 +01:00
uboot-envtools.sh move boot related packages to their own folder 2012-10-16 13:44:25 +00:00