mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-28 09:39:00 +00:00
d4c999bb89
backport from wireless-drivers-next, replacing some existing patches in our tree (marked with '=' are those which were already present): f483039cf51a rt2x00: use simple_read_from_buffer() =5c656c71b1bf rt2800: move usb specific txdone/txstatus routines to rt2800lib =0b0d556e0ebb rt2800mmio: use txdone/txstatus routines from lib =5022efb50f62 rt2x00: do not check for txstatus timeout every time on tasklet =adf26a356f13 rt2x00: use different txstatus timeouts when flushing =0240564430c0 rt2800: flush and txstatus rework for rt2800mmio 6eba8fd22352 rt2x00: rt2400pci: mark expected switch fall-through 10bb92217747 rt2x00: rt2500pci: mark expected switch fall-through 916e6bbcfcff rt2x00: rt2800lib: mark expected switch fall-throughs 641dd8068ecb rt2x00: rt61pci: mark expected switch fall-through 750afb08ca71 cross-tree: phase out dma_zalloc_coherent() =c2e28ef7711f rt2x00: reduce tx power to nominal level on RT6352 a4296994eb80 rt2x00: Work around a firmware bug with shared keys 2587791d5758 rt2x00: no need to check return value of debugfs_create functions pending on linux-wireless: rt2x00: remove unneeded check rt2x00: remove confusing AGC register rt2800: enable TX_PIN_CFG_LNA_PE_ bits per band rt2800: enable TX_PIN_CFG_RFRX_EN only for MT7620 rt2800: comment and simplify AGC init for RT6352 rt2x00: do not print error when queue is full rt2800: partially restore old mmio txstatus behaviour rt2800: new flush implementation for SoC devices rt2800: move txstatus pending routine rt2800mmio: fetch tx status changes rt2800mmio: use timer and work for handling tx statuses timeouts rt2x00: remove last_nostatus_check rt2x00: remove not used entry field rt2x00mmio: remove legacy comment While at it also rename some existing patches now that there are separate folders with patches for each driver to make things a bit nicer to handle. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
33 lines
1.3 KiB
Diff
33 lines
1.3 KiB
Diff
From cb77f0f92f596a2ef54246db7321e319305e8156 Mon Sep 17 00:00:00 2001
|
|
From: Stanislaw Gruszka <sgruszka@redhat.com>
|
|
Date: Wed, 13 Feb 2019 11:09:16 +0100
|
|
Subject: [PATCH 19/28] rt2800: comment and simplify AGC init for RT6352
|
|
|
|
We do not need separate lines for calculating register values.
|
|
Also add comment that value is different than in vendor driver.
|
|
|
|
Suggested-by: Daniel Golle <daniel@makrotopia.org>
|
|
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
|
|
---
|
|
drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 9 ++++++---
|
|
1 file changed, 6 insertions(+), 3 deletions(-)
|
|
|
|
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
|
|
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
|
|
@@ -3989,9 +3989,12 @@ static void rt2800_config_channel(struct
|
|
rt2800_bbp_write(rt2x00dev, 195, 141);
|
|
rt2800_bbp_write(rt2x00dev, 196, reg);
|
|
|
|
- /* AGC init */
|
|
- reg = rf->channel <= 14 ? 0x1c : 0x24;
|
|
- reg += 2 * rt2x00dev->lna_gain;
|
|
+ /* AGC init.
|
|
+ * Despite the vendor driver using different values here for
|
|
+ * RT6352 chip, we use 0x1c for now. This may have to be changed
|
|
+ * once TSSI got implemented.
|
|
+ */
|
|
+ reg = (rf->channel <= 14 ? 0x1c : 0x24) + 2*rt2x00dev->lna_gain;
|
|
rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, reg);
|
|
|
|
rt2800_iq_calibrate(rt2x00dev, rf->channel);
|