openwrt/target/linux/ath79/dts/qca9563_tplink_eap225-v3.dts
Sander Vanheule 9320516613 ath79: move ethernet phy node for TP-Link EAP devices
Move the ethernet phy definition from the eap2x5-1port include to the
device-specific DTS files. This is to prepare for new devices that have
a different ethernet phy, at another MDIO address.

Signed-off-by: Sander Vanheule <sander@svanheule.net>
2022-06-16 21:39:32 +02:00

61 lines
1.0 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qca9563_tplink_eap2x5-1port.dtsi"
/ {
compatible = "tplink,eap225-v3", "qca,qca9563";
model = "TP-Link EAP225 v3";
aliases {
led-boot = &led_status_green;
led-failsafe = &led_status_amber;
led-running = &led_status_green;
led-upgrade = &led_status_amber;
};
leds {
compatible = "gpio-leds";
led_status_green: status_green {
label = "green:status";
gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
led_status_amber: status_amber {
label = "amber:status";
gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
};
};
};
&art {
calibration_ath10k: calibration@5000 {
reg = <0x5000 0x2f20>;
};
};
&eth0 {
phy-handle = <&phy4>;
phy-mode = "sgmii";
};
&mdio0 {
phy4: ethernet-phy@4 {
reg = <4>;
reset-gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
};
&pcie {
wifi@0,0 {
compatible = "qcom,ath10k";
reg = <0 0 0 0 0>;
mac-address-increment = <1>;
nvmem-cells = <&macaddr_info_8>, <&calibration_ath10k>;
nvmem-cell-names = "mac-address", "calibration";
};
};