openwrt/target/linux/ath79
INAGAKI Hiroshi 7768f11534 ath79: add support for ELECOM WRC-300GHBK2-I
ELECOM WRC-300GHBK2-I is a 2.4 GHz wireless router, based on Qualcomm
Atheros QCA9563.

Specification:

- Qualcomm Atheros QCA9563
- 64 MB of RAM (DDR2)
- 8 MB of Flash (SPI-NOR)
- 2T2R 2.4 GHz wifi
  - SoC internal
- 5x 10/100/1000 Mbps Ethernet
- 3x LEDs, 4x keys(connected to GPIO: 3x)
- UART header on PCB
  - TX, GND, RX, Vcc from ethernet port side
  - 115200n8

Flash instruction using factory image:

1. Boot the WRC-300GHBK2-I normaly and connect the computer to its
LAN port
2. Access to "http://192.168.2.1/" and open firmware update page
("ファームウェア更新 手動更新(アップデート)")
3. Select the OpenWrt factory image and click apply ("適用") button
to perform firmware update
4. On the (initramfs) factory image, execute "mtd erase firmware" to
erase stock firmware and execute sysupgrade with squashfs-sysupgrade
image for WRC-300GHBK2-I
5. Wait ~150 seconds to complete flashing

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
2018-09-10 09:30:28 +02:00
..
base-files ath79: add support for ELECOM WRC-300GHBK2-I 2018-09-10 09:30:28 +02:00
dts ath79: add support for ELECOM WRC-300GHBK2-I 2018-09-10 09:30:28 +02:00
files ath79: port cybertan_part from ar71xx 2018-09-10 09:07:11 +02:00
generic ath79: initial support for Ubiquiti RouterStation and RouterStation Pro 2018-08-27 19:31:17 +02:00
image ath79: add support for ELECOM WRC-300GHBK2-I 2018-09-10 09:30:28 +02:00
nand ath79: add initial nand support for gl-ar300m 2018-06-18 20:29:38 +02:00
patches-4.14 ath79: port cybertan_part from ar71xx 2018-09-10 09:07:11 +02:00
tiny ath79: add support for TP-Link TL-WR941N/ND v2/v3 2018-08-14 10:19:37 +02:00
config-4.14 ath79: port cybertan_part from ar71xx 2018-09-10 09:07:11 +02:00
Makefile ath79: add initial nand support for gl-ar300m 2018-06-18 20:29:38 +02:00
modules.mk