mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-20 06:08:08 +00:00
252197f014
Devices with PCIe-Switches like the WNDR4700, MR24 and WNDAP660 need to have the interrupts property specified in the device-tree for the legacy pci interrupt signaling method to work. If the proper interrupt value is not specified, the default INTA IRQ 12 is taken for all devices. This is especially bad, if the device is setup to use INTC, because these interrupts will not be serviced. Russell Senior reported his experience on the MR24: "The symptom is client devices can't see the beacons. Wifi ifaces appear, can scan and hear other networks, but clients can't see the MR24's SSIDs." (The interrupts-property on the WNDAP620 was optional since it uses INTA by default. Likewise the MX60W is in the same category) Reported-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
200 lines
3.2 KiB
Plaintext
200 lines
3.2 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Device Tree Source for Meraki MX60/MX60W (Buckminster)
|
|
*
|
|
* Copyright (C) 2016 Chris Blake <chrisrblake93@gmail.com>
|
|
*
|
|
* Based on Cisco Meraki DTS extracted from release wired-12-217818
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include "apm82181.dtsi"
|
|
|
|
/ {
|
|
model = "Meraki MX60/MX60W Security Appliance";
|
|
compatible = "meraki,mx60", "meraki,buckminster", "apm,bluestone";
|
|
|
|
aliases {
|
|
serial0 = &UART1;
|
|
led-boot = &status;
|
|
led-failsafe = &failsafe;
|
|
led-running = &status;
|
|
led-upgrade = &status;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "/plb/opb/serial@ef600400";
|
|
};
|
|
};
|
|
|
|
&CRYPTO {
|
|
status = "okay";
|
|
};
|
|
|
|
&PKA {
|
|
status = "okay";
|
|
};
|
|
|
|
&TRNG {
|
|
status = "okay";
|
|
};
|
|
|
|
&USBOTG0 {
|
|
status = "okay";
|
|
dr_mode = "host";
|
|
};
|
|
|
|
&EBC0 {
|
|
/* Buckminster has 1GiB of NAND */
|
|
ndfc@1,0 {
|
|
status = "okay";
|
|
nand {
|
|
partition@0 {
|
|
label = "u-boot";
|
|
reg = <0x00000000 0x00100000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@100000 {
|
|
label = "u-boot-env";
|
|
reg = <0x00100000 0x00100000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@200000 {
|
|
label = "oops";
|
|
reg = <0x00200000 0x00040000>;
|
|
};
|
|
|
|
partition@240000 {
|
|
label = "ubi";
|
|
reg = <0x00240000 0x3fdc0000>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&UART1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&GPIO0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&IIC0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&EMAC0 {
|
|
status = "okay";
|
|
phy-handle = <&phy0>;
|
|
|
|
mdio {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
phy0: ethernet-phy@0 {
|
|
compatible = "ethernet-phy-id004d.d034";
|
|
reg = <0>;
|
|
qca,mib-poll-interval = <500>;
|
|
|
|
qca,ar8327-initvals = <
|
|
0x0010 0x40000000
|
|
0x0624 0x007f7f7f
|
|
0x0004 0x07a00000 /* PAD0_MODE */
|
|
0x000c 0x01000000 /* PAD6_MODE */
|
|
0x007c 0x0000007e /* PORT0_STATUS */
|
|
>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&POB0 {
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
status: power-green {
|
|
label = "mx60:green:power";
|
|
gpios = <&GPIO0 18 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
failsafe: power-orange {
|
|
label = "mx60:orange:power";
|
|
gpios = <&GPIO0 19 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
wan-green {
|
|
label = "mx60:green:wan";
|
|
gpios = <&GPIO0 17 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
wan-orange {
|
|
label = "mx60:orange:wan";
|
|
gpios = <&GPIO0 15 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
lan1 {
|
|
label = "mx60:green:lan1";
|
|
gpios = <&GPIO0 20 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
lan2 {
|
|
label = "mx60:green:lan2";
|
|
gpios = <&GPIO0 21 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
lan3 {
|
|
label = "mx60:green:lan3";
|
|
gpios = <&GPIO0 22 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
lan4 {
|
|
label = "mx60:green:lan4";
|
|
gpios = <&GPIO0 23 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
keys {
|
|
compatible = "gpio-keys";
|
|
|
|
reset {
|
|
label = "Reset button";
|
|
linux,code = <KEY_RESTART>;
|
|
gpios = <&GPIO0 16 GPIO_ACTIVE_LOW>;
|
|
interrupt-parent = <&UIC1>;
|
|
interrupts = <0x15 IRQ_TYPE_EDGE_FALLING>;
|
|
debounce-interval = <60>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&PCIE0 {
|
|
/* Leave this enabled as u-boot on the MX60 will disable it for us */
|
|
status = "okay";
|
|
|
|
/*
|
|
* relevant lspci topology:
|
|
*
|
|
* -+-[0000:40]---00.0-[41-7f]----00.0
|
|
*/
|
|
|
|
bridge@64,0 {
|
|
reg = <0x00400000 0 0 0 0>;
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
wifi0: wifi@65,0 {
|
|
/* Atheros AR9380 2.4/5GHz */
|
|
compatible = "pci168c,0030";
|
|
reg = <0x00410000 0 0 0 0>;
|
|
interrupts = <1>; /* INTA */
|
|
};
|
|
};
|
|
};
|
|
|
|
&MSI {
|
|
status = "okay";
|
|
};
|