mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-30 10:39:04 +00:00
76d079204d
Changelogs: * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.12 * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.13 * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.14 Build tested on brcm63xx and ipq806x, runtested on brcm63xx. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 45711
286 lines
6.0 KiB
Diff
286 lines
6.0 KiB
Diff
From a32d6e7c8fca6371a2614924b89981bc912b6378 Mon Sep 17 00:00:00 2001
|
|
From: Mathieu Olivari <mathieu@codeaurora.org>
|
|
Date: Tue, 7 Apr 2015 19:58:58 -0700
|
|
Subject: [PATCH] ARM: dts: qcom: add initial DB149 device-tree
|
|
|
|
Add basic DB149 (IPQ806x based platform) device-tree. It supports UART,
|
|
SATA, USB2, USB3 and NOR flash.
|
|
|
|
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
|
|
---
|
|
arch/arm/boot/dts/Makefile | 1 +
|
|
arch/arm/boot/dts/qcom-ipq8064-db149.dts | 257 +++++++++++++++++++++++++++++++
|
|
2 files changed, 258 insertions(+)
|
|
create mode 100644 arch/arm/boot/dts/qcom-ipq8064-db149.dts
|
|
|
|
--- a/arch/arm/boot/dts/Makefile
|
|
+++ b/arch/arm/boot/dts/Makefile
|
|
@@ -360,6 +360,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
|
|
qcom-apq8084-ifc6540.dtb \
|
|
qcom-apq8084-mtp.dtb \
|
|
qcom-ipq8064-ap148.dtb \
|
|
+ qcom-ipq8064-db149.dtb \
|
|
qcom-msm8660-surf.dtb \
|
|
qcom-msm8960-cdp.dtb \
|
|
qcom-msm8974-sony-xperia-honami.dtb
|
|
--- /dev/null
|
|
+++ b/arch/arm/boot/dts/qcom-ipq8064-db149.dts
|
|
@@ -0,0 +1,257 @@
|
|
+#include "qcom-ipq8064-v1.0.dtsi"
|
|
+
|
|
+/ {
|
|
+ model = "Qualcomm IPQ8064/DB149";
|
|
+ compatible = "qcom,ipq8064-db149", "qcom,ipq8064";
|
|
+
|
|
+ reserved-memory {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <1>;
|
|
+ ranges;
|
|
+ rsvd@41200000 {
|
|
+ reg = <0x41200000 0x300000>;
|
|
+ no-map;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ alias {
|
|
+ serial0 = &uart2;
|
|
+ };
|
|
+
|
|
+ chosen {
|
|
+ linux,stdout-path = "serial0:115200n8";
|
|
+ };
|
|
+
|
|
+ aliases {
|
|
+ mdio-gpio0 = &mdio0;
|
|
+ };
|
|
+
|
|
+ soc {
|
|
+ pinmux@800000 {
|
|
+ pinctrl-0 = <&mdio0_pins &rgmii0_pinmux>;
|
|
+ pinctrl-names = "default";
|
|
+
|
|
+ i2c4_pins: i2c4_pinmux {
|
|
+ pins = "gpio12", "gpio13";
|
|
+ function = "gsbi4";
|
|
+ bias-disable;
|
|
+ };
|
|
+
|
|
+ spi_pins: spi_pins {
|
|
+ mux {
|
|
+ pins = "gpio18", "gpio19", "gpio21";
|
|
+ function = "gsbi5";
|
|
+ drive-strength = <10>;
|
|
+ bias-none;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ mdio0_pins: mdio0_pins {
|
|
+ mux {
|
|
+ pins = "gpio0", "gpio1";
|
|
+ function = "gpio";
|
|
+ drive-strength = <8>;
|
|
+ bias-disable;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ rgmii0_pinmux: rgmii0_pinmux {
|
|
+ mux {
|
|
+ pins = "gpio2", "gpio66";
|
|
+ drive-strength = <8>;
|
|
+ bias-disable;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ gsbi2: gsbi@12480000 {
|
|
+ qcom,mode = <GSBI_PROT_I2C_UART>;
|
|
+ status = "ok";
|
|
+ uart2: serial@12490000 {
|
|
+ status = "ok";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ gsbi5: gsbi@1a200000 {
|
|
+ qcom,mode = <GSBI_PROT_SPI>;
|
|
+ status = "ok";
|
|
+
|
|
+ spi4: spi@1a280000 {
|
|
+ status = "ok";
|
|
+ spi-max-frequency = <50000000>;
|
|
+
|
|
+ pinctrl-0 = <&spi_pins>;
|
|
+ pinctrl-names = "default";
|
|
+
|
|
+ cs-gpios = <&qcom_pinmux 20 0>;
|
|
+
|
|
+ flash: m25p80@0 {
|
|
+ compatible = "s25fl256s1";
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <1>;
|
|
+ spi-max-frequency = <50000000>;
|
|
+ reg = <0>;
|
|
+ m25p,fast-read;
|
|
+
|
|
+ partition@0 {
|
|
+ label = "lowlevel_init";
|
|
+ reg = <0x0 0x1b0000>;
|
|
+ };
|
|
+
|
|
+ partition@1 {
|
|
+ label = "u-boot";
|
|
+ reg = <0x1b0000 0x80000>;
|
|
+ };
|
|
+
|
|
+ partition@2 {
|
|
+ label = "u-boot-env";
|
|
+ reg = <0x230000 0x40000>;
|
|
+ };
|
|
+
|
|
+ partition@3 {
|
|
+ label = "caldata";
|
|
+ reg = <0x270000 0x40000>;
|
|
+ };
|
|
+
|
|
+ partition@4 {
|
|
+ label = "firmware";
|
|
+ reg = <0x2b0000 0x1d50000>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ sata-phy@1b400000 {
|
|
+ status = "ok";
|
|
+ };
|
|
+
|
|
+ sata@29000000 {
|
|
+ status = "ok";
|
|
+ };
|
|
+
|
|
+ phy@100f8800 { /* USB3 port 1 HS phy */
|
|
+ status = "ok";
|
|
+ };
|
|
+
|
|
+ phy@100f8830 { /* USB3 port 1 SS phy */
|
|
+ status = "ok";
|
|
+ };
|
|
+
|
|
+ phy@110f8800 { /* USB3 port 0 HS phy */
|
|
+ status = "ok";
|
|
+ };
|
|
+
|
|
+ phy@110f8830 { /* USB3 port 0 SS phy */
|
|
+ status = "ok";
|
|
+ };
|
|
+
|
|
+ usb30@0 {
|
|
+ status = "ok";
|
|
+ };
|
|
+
|
|
+ usb30@1 {
|
|
+ status = "ok";
|
|
+ };
|
|
+
|
|
+ mdio0: mdio {
|
|
+ compatible = "virtual,mdio-gpio";
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+ gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
|
|
+
|
|
+ phy0: ethernet-phy@0 {
|
|
+ device_type = "ethernet-phy";
|
|
+ reg = <0>;
|
|
+ qca,ar8327-initvals = <
|
|
+ 0x00004 0x7600000 /* PAD0_MODE */
|
|
+ 0x00008 0x1000000 /* PAD5_MODE */
|
|
+ 0x0000c 0x80 /* PAD6_MODE */
|
|
+ 0x000e4 0xaa545 /* MAC_POWER_SEL */
|
|
+ 0x000e0 0xc74164de /* SGMII_CTRL */
|
|
+ 0x0007c 0x4e /* PORT0_STATUS */
|
|
+ 0x00094 0x4e /* PORT6_STATUS */
|
|
+ >;
|
|
+ };
|
|
+
|
|
+ phy4: ethernet-phy@4 {
|
|
+ device_type = "ethernet-phy";
|
|
+ reg = <4>;
|
|
+ };
|
|
+
|
|
+ phy6: ethernet-phy@6 {
|
|
+ device_type = "ethernet-phy";
|
|
+ reg = <6>;
|
|
+ };
|
|
+
|
|
+ phy7: ethernet-phy@7 {
|
|
+ device_type = "ethernet-phy";
|
|
+ reg = <7>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ nss-gmac-common {
|
|
+ reg = <0x03000000 0x0000FFFF 0x1bb00000 0x0000FFFF 0x00900000 0x00004000>;
|
|
+ reg-names = "nss_reg_base" , "qsgmii_reg_base", "clk_ctl_base";
|
|
+ };
|
|
+
|
|
+ gmac0: ethernet@37000000 {
|
|
+ status = "ok";
|
|
+ phy-mode = "rgmii";
|
|
+ qcom,id = <0>;
|
|
+ qcom,phy_mdio_addr = <4>;
|
|
+ qcom,poll_required = <1>;
|
|
+ qcom,rgmii_delay = <1>;
|
|
+ qcom,emulation = <0>;
|
|
+ qcom,forced_speed = <1000>;
|
|
+ qcom,forced_duplex = <1>;
|
|
+ qcom,socver = <0>;
|
|
+ local-mac-address = [000000000000];
|
|
+ mdiobus = <&mdio0>;
|
|
+ };
|
|
+
|
|
+ gmac1: ethernet@37200000 {
|
|
+ status = "ok";
|
|
+ phy-mode = "sgmii";
|
|
+ qcom,id = <1>;
|
|
+ qcom,phy_mdio_addr = <0>;
|
|
+ qcom,poll_required = <0>;
|
|
+ qcom,rgmii_delay = <0>;
|
|
+ qcom,emulation = <0>;
|
|
+ qcom,forced_speed = <1000>;
|
|
+ qcom,forced_duplex = <1>;
|
|
+ qcom,socver = <0>;
|
|
+ local-mac-address = [000000000000];
|
|
+ mdiobus = <&mdio0>;
|
|
+ };
|
|
+
|
|
+ gmac2: ethernet@37400000 {
|
|
+ status = "ok";
|
|
+ phy-mode = "sgmii";
|
|
+ qcom,id = <2>;
|
|
+ qcom,phy_mdio_addr = <6>;
|
|
+ qcom,poll_required = <1>;
|
|
+ qcom,rgmii_delay = <0>;
|
|
+ qcom,emulation = <0>;
|
|
+ qcom,forced_speed = <0>;
|
|
+ qcom,forced_duplex = <0>;
|
|
+ qcom,socver = <0>;
|
|
+ local-mac-address = [000000000000];
|
|
+ mdiobus = <&mdio0>;
|
|
+ };
|
|
+
|
|
+ gmac3: ethernet@37600000 {
|
|
+ status = "ok";
|
|
+ phy-mode = "sgmii";
|
|
+ qcom,id = <3>;
|
|
+ qcom,phy_mdio_addr = <7>;
|
|
+ qcom,poll_required = <1>;
|
|
+ qcom,rgmii_delay = <0>;
|
|
+ qcom,emulation = <0>;
|
|
+ qcom,forced_speed = <0>;
|
|
+ qcom,forced_duplex = <0>;
|
|
+ qcom,socver = <0>;
|
|
+ local-mac-address = [000000000000];
|
|
+ mdiobus = <&mdio0>;
|
|
+ };
|
|
+ };
|
|
+};
|