mirror of
https://github.com/openwrt/openwrt.git
synced 2025-01-13 16:31:09 +00:00
51b9aef553
SOC: IPQ4019 CPU: Quad-core ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d DRAM: 256 MB NAND: 128 MiB Macronix MX30LF1G18AC ETH: Qualcomm Atheros QCA8075 Gigabit Switch (4x LAN, 1x WAN) USB: 1x 3.0 (via Synopsys DesignWare DWC3 controller in the SoC) WLAN1: Qualcomm Atheros QCA4019 2.4GHz 802.11bgn 2x2:2 WLAN2: Qualcomm Atheros QCA9984 5GHz 802.11nac 4x4:4 INPUT: 1x WPS, 1x Reset LEDS: Status, WIFI1, WIFI2, WAN (red & blue), 4x LAN This board is very similar to the RT-ACRH13/RT-AC58U. It must be flashed with an intermediary initramfs image, the jffs2 ubi volume deleted, and then finally a sysupgrade with the final image performed. Signed-off-by: Joshua Roys <roysjosh@gmail.com> (added ALT0) Signed-off-by: Christian Lamparter <chunkeey@gmail.com> |
||
---|---|---|
.. | ||
104-clk-fix-apss-cpu-overclocking.patch | ||
105-ipq40xx-fix-sleep-clock.patch | ||
300-clk-qcom-ipq4019-add-ess-reset.patch | ||
301-arm-compressed-add-appended-DTB-section.patch | ||
302-arm-compressed-set-ipq40xx-watchdog-to-allow-boot.patch | ||
400-mmc-sdhci-sdhci-msm-use-sdhci_set_clock-instead-of-s.patch | ||
702-dts-ipq4019-add-PHY-switch-nodes.patch | ||
703-net-IPQ4019-needs-rfs-vlan_tag-callbacks-in.patch | ||
705-net-add-qualcomm-ar40xx-phy.patch | ||
706-dt-bindings-net-add-QCA807x-PHY.patch | ||
707-net-phy-Add-Qualcom-QCA807x-driver.patch | ||
708-arm-dts-ipq4019-QCA807x-properties.patch | ||
710-net-add-qualcomm-essedma-ethernet-driver.patch | ||
711-dts-ipq4019-add-ethernet-essedma-node.patch | ||
850-soc-add-qualcomm-syscon.patch | ||
900-dts-ipq4019-ap-dk01.1.patch | ||
901-arm-boot-add-dts-files.patch | ||
902-dts-ipq4019-ap-dk04.1.patch | ||
997-device_tree_cmdline.patch | ||
0001-v5.12-ARM-dts-qcom-ipq4019-add-USB-devicetree-nodes.patch | ||
0002-v5.12-ARM-dts-qcom-ipq4019-add-more-labels.patch | ||
0003-v5.12-ARM-dts-qcom-ipq4019-add-SDHCI-VQMMC-LDO-node.patch |