openwrt/target/linux/ramips/dts/mt7621_keenetic_kn-3010.dts

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "mt7621.dtsi"

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

/ {
	compatible = "keenetic,kn-3010", "mediatek,mt7621-soc";
	model = "Keenetic KN-3010";

	aliases {
		led-boot = &led_power;
		led-failsafe = &led_power;
		led-running = &led_power;
		led-upgrade = &led_power;
		label-mac-device = &gmac0;
	};

	chosen {
		bootargs = "console=ttyS0,115200";
	};

	leds {
		compatible = "gpio-leds";

		led_power: power {
			label = "green:power";
			gpios = <&gpio 45 GPIO_ACTIVE_HIGH>;
		};

		internet {
			label = "green:internet";
			gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
		};

		wifi2 {
			label = "green:wifi2";
			gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
			linux,default-trigger = "phy0tpt";
		};

		wifi5 {
			label = "green:wifi5";
			gpios = <&gpio 48 GPIO_ACTIVE_LOW>;
			linux,default-trigger = "phy1tpt";
		};
	};

	keys {
		compatible = "gpio-keys";

		fn {
			label = "fn";
			gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
			linux,code = <BTN_0>;
		};

		reset {
			label = "reset";
			gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_RESTART>;
		};

		wps {
			label = "wps";
			gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_WPS_BUTTON>;
		};
	};

	virtual_flash {
		compatible = "mtd-concat";
		devices = <&firmware1 &firmware2>;

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			partition@0 {
				compatible = "denx,uimage";
				label = "firmware";
				reg = <0x0 0x1ec0000>;
			};
		};
	};
};

&state_default {
	gpio {
		groups = "uart3", "sdhci";
		function = "gpio";
	};
};

&xhci {
	status = "disabled";
};

&spi0 {
	status = "okay";

	flash@0 {
		compatible = "jedec,spi-nor";
		reg = <0>;
		spi-max-frequency = <31000000>;

		partitions: partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			partition@0 {
				label = "u-boot";
				reg = <0x0 0x30000>;
				read-only;
			};

			partition@30000 {
				label = "u-config";
				reg = <0x30000 0x10000>;
				read-only;
			};

			factory: partition@40000 {
				label = "rf-eeprom";
				reg = <0x40000 0x10000>;
				read-only;
			};

			firmware1: partition@50000 {
				label = "firmware_1";
				reg = <0x50000 0xf60000>;
			};

			partition@fb0000 {
				label = "config_1";
				reg = <0xfb0000 0x40000>;
				read-only;
			};

			partition@ff0000 {
				label = "dump";
				reg = <0xff0000 0x10000>;
				read-only;
			};

			partition@1000000 {
				label = "u-state";
				reg = <0x1000000 0x30000>;
				read-only;
			};

			partition@1030000 {
				label = "u-config_res";
				reg = <0x1030000 0x10000>;
				read-only;
			};

			partition@1040000 {
				label = "rf-eeprom_res";
				reg = <0x1040000 0x10000>;
				read-only;
			};

			firmware2: partition@1050000 {
				label = "firmware_2";
				reg = <0x1050000 0xf60000>;
			};

			partition@1fb0000 {
				label = "config_2";
				reg = <0x1fb0000 0x40000>;
				read-only;
			};
		};
	};
};

&mdio {
	ethphy0: ethernet-phy@0 {
		reg = <0>;
	};
};

&gmac0 {
	nvmem-cells = <&macaddr_factory_4>;
	nvmem-cell-names = "mac-address";
};

&gmac1 {
	status = "okay";
	label = "wan";
	phy-handle = <&ethphy0>;

	nvmem-cells = <&macaddr_factory_28>;
	nvmem-cell-names = "mac-address";
};

&switch0 {
	ports {
		port@1 {
			status = "okay";
			label = "lan1";
		};

		port@2 {
			status = "okay";
			label = "lan2";
		};

		port@3 {
			status = "okay";
			label = "lan3";
		};

		port@4 {
			status = "okay";
			label = "lan4";
		};
	};
};

&pcie {
	status = "okay";
};

&pcie0 {
	wifi@0,0 {
		compatible = "mediatek,mt76";
		reg = <0x0000 0 0 0 0>;
		mediatek,mtd-eeprom = <&factory 0x0000>;
		ieee80211-freq-limit = <2400000 2500000>;
	};
};

&pcie1 {
	wifi@0,0 {
		compatible = "mediatek,mt76";
		reg = <0x0000 0 0 0 0>;
		mediatek,mtd-eeprom = <&factory 0x0400>;
		ieee80211-freq-limit = <5000000 6000000>;
	};
};

&factory {
	compatible = "nvmem-cells";
	#address-cells = <1>;
	#size-cells = <1>;

	macaddr_factory_4: macaddr@4 {
		reg = <0x4 0x6>;
	};

	macaddr_factory_28: macaddr@28 {
		reg = <0x28 0x6>;
	};
};