mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-28 01:28:59 +00:00
b5f32064ed
Qualcomm Atheros IPQ807x is a modern WiSoC featuring: * Quad Core ARMv8 Cortex A-53 * @ 2.2 GHz (IPQ8072A/4A/6A/8A) Codename Hawkeye * @ 1.4 GHz (IPQ8070A/1A) Codename Acorn * Dual Band simultaneaous IEEE 802.11ax * 5G: 8x8/80 or 4x4/160MHz (IPQ8074A/8A) * 5G: 4x4/80 or 2x2/160MHz (IPQ8071A/2A/6A) * 5G: 2x2/80MHz (IPQ8070A) * 2G: 4x4/40MHz (IPQ8072A/4A/6A/8A) * 2G: 2x2/40MHz (IPQ8070A/1A) * 1x PSGMII via QCA8072/5 (Max 5x 1GbE ports) * 2x SGMII/USXGMII (1/2.5/5/10 GbE) on Hawkeye * 2x SGMII/USXGMII (1/2.5/5 GbE) on Acorn * DDR3L/4 32/16 bit up to 2400MT/s * SDIO 3.0/SD card 3.0/eMMC 5.1 * Dual USB 3.0 * One PCIe Gen2.1 and one PCIe Gen3.0 port (Single lane) * Parallel NAND (ONFI)/LCD * 6x QUP BLSP SPI/I2C/UART * I2S, PCM, and TDMA * HW PWM * 1.8V configurable GPIO * Companion PMP8074 PMIC via SPMI (GPIOS, RTC etc) Note that only v2 SOC models aka the ones ending with A suffix are supported, v1 models do not comply to the final 802.11ax and have lower clocks, lack the Gen3 PCIe etc. SoC itself has two UBI32 cores for the NSS offloading system, however currently no offloading is supported. Signed-off-by: Robert Marko <robimarko@gmail.com>
53 lines
1.4 KiB
Diff
53 lines
1.4 KiB
Diff
From 0afa47c1b57ba645225b38654869a6e5d2939da5 Mon Sep 17 00:00:00 2001
|
|
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Date: Fri, 6 May 2022 18:21:07 +0300
|
|
Subject: [PATCH] arm64: dts: qcom: replace deprecated perst-gpio with
|
|
perst-gpios
|
|
|
|
Replace deprecated perst-gpio and wake-gpio properties with up-to-date
|
|
perst-gpios and wake-gpios in the Qualcomm device trees.
|
|
|
|
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Link: https://lore.kernel.org/r/20220506152107.1527552-9-dmitry.baryshkov@linaro.org
|
|
---
|
|
arch/arm64/boot/dts/qcom/ipq8074-hk01.dts | 4 ++--
|
|
arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi | 4 ++--
|
|
2 files changed, 4 insertions(+), 4 deletions(-)
|
|
|
|
--- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
|
|
+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
|
|
@@ -49,12 +49,12 @@
|
|
|
|
&pcie0 {
|
|
status = "okay";
|
|
- perst-gpio = <&tlmm 61 0x1>;
|
|
+ perst-gpios = <&tlmm 61 0x1>;
|
|
};
|
|
|
|
&pcie1 {
|
|
status = "okay";
|
|
- perst-gpio = <&tlmm 58 0x1>;
|
|
+ perst-gpios = <&tlmm 58 0x1>;
|
|
};
|
|
|
|
&pcie_phy0 {
|
|
--- a/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi
|
|
+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi
|
|
@@ -39,12 +39,12 @@
|
|
|
|
&pcie0 {
|
|
status = "ok";
|
|
- perst-gpio = <&tlmm 58 0x1>;
|
|
+ perst-gpios = <&tlmm 58 0x1>;
|
|
};
|
|
|
|
&pcie1 {
|
|
status = "ok";
|
|
- perst-gpio = <&tlmm 61 0x1>;
|
|
+ perst-gpios = <&tlmm 61 0x1>;
|
|
};
|
|
|
|
&pcie_phy0 {
|