openwrt/target/linux/ramips/dts/mt7621_iptime_a3004t.dts
Christian Marangi 7630c052c4
ramips: drop redundant label with new LED color/function format
Drop redundant label with new LED color/function format declared.
This was needed previously when the new format wasn't supported by
leds.sh functions script. Now that is supported this property
can be removed in favor of the new format.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2024-02-07 14:48:43 +01:00

187 lines
2.9 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
/ {
compatible = "iptime,a3004t", "mediatek,mt7621-soc";
model = "ipTIME A3004T";
aliases {
led-boot = &led_cpu;
led-failsafe = &led_cpu;
led-running = &led_cpu;
led-upgrade = &led_cpu;
};
leds {
compatible = "gpio-leds";
led_cpu: led-0 {
color = <LED_COLOR_ID_AMBER>;
function = LED_FUNCTION_CPU;
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
};
led-1 {
color = <LED_COLOR_ID_AMBER>;
function = LED_FUNCTION_WLAN;
function-enumerator = <0>;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0radio";
};
led-2 {
color = <LED_COLOR_ID_AMBER>;
function = LED_FUNCTION_WLAN;
function-enumerator = <1>;
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1radio";
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
};
&nand {
status = "okay";
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x80000>;
read-only;
};
partition@80000 {
label = "config";
reg = <0x80000 0x20000>;
read-only;
};
factory: partition@a0000 {
label = "factory";
reg = <0xa0000 0x20000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
eeprom_factory_0: eeprom@0 {
reg = <0x0 0x4da8>;
};
macaddr_factory_4: macaddr@4 {
compatible = "mac-base";
reg = <0x4 0x6>;
#nvmem-cell-cells = <1>;
};
macaddr_factory_8004: macaddr@8004 {
reg = <0x8004 0x6>;
};
};
};
partition@140000 {
label = "firmware";
reg = <0x140000 0x7e40000>;
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "kernel";
reg = <0x0 0x400000>;
};
partition@400000 {
label = "ubi";
reg = <0x400000 0x7a40000>;
};
};
};
};
&gmac0 {
nvmem-cells = <&macaddr_factory_4 3>;
nvmem-cell-names = "mac-address";
};
&gmac1 {
status = "okay";
label = "wan";
phy-handle = <&ethphy0>;
nvmem-cells = <&macaddr_factory_4 1>;
nvmem-cell-names = "mac-address";
};
&mdio {
ethphy0: ethernet-phy@0 {
reg = <0>;
};
};
&switch0 {
ports {
port@1 {
status = "okay";
label = "lan4";
};
port@2 {
status = "okay";
label = "lan3";
};
port@3 {
status = "okay";
label = "lan2";
};
port@4 {
status = "okay";
label = "lan1";
};
};
};
&pcie {
status = "okay";
};
&pcie0 {
wifi@0,0 {
compatible = "mediatek,mt76";
reg = <0x0000 0 0 0 0>;
nvmem-cells = <&eeprom_factory_0>;
nvmem-cell-names = "eeprom";
};
};
&state_default {
gpio {
groups = "i2c", "jtag", "wdt";
function = "gpio";
};
};