mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-31 19:17:12 +00:00
8411e5c06e
Switch to using the B53 switch driver where appropriate. Use a non-tagged default config where it isn't confirmed to be working. Remove the switch configuration in preinit as the switch will now be configured by the driver to use port isolation to prevent leakage between lan and wan. While at it, also provide a switch config for Neufbox 6. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35307
139 lines
3.0 KiB
Diff
139 lines
3.0 KiB
Diff
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
|
|
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
|
|
@@ -52,6 +52,13 @@
|
|
#define NB4_SPI_GPIO_CLK 6
|
|
#define NB4_74HC64_GPIO(X) (NB4_74X164_GPIO_BASE + (X))
|
|
|
|
+#define CT6373_PID_OFFSET 0xff80
|
|
+#define CT6373_74X164_GPIO_BASE 64
|
|
+#define CT6373_SPI_GPIO_MOSI 7
|
|
+#define CT6373_SPI_GPIO_CLK 6
|
|
+#define CT6373_74HC64_GPIO(X) (CT6373_74X164_GPIO_BASE + (X))
|
|
+
|
|
+
|
|
static struct board_info board;
|
|
|
|
/*
|
|
@@ -2264,6 +2271,113 @@ static struct board_info __initdata boar
|
|
.num_spis = ARRAY_SIZE(nb4_spi_devices),
|
|
};
|
|
|
|
+
|
|
+struct spi_gpio_platform_data ct6373_spi_gpio_data = {
|
|
+ .sck = CT6373_SPI_GPIO_CLK,
|
|
+ .mosi = CT6373_SPI_GPIO_MOSI,
|
|
+ .miso = SPI_GPIO_NO_MISO,
|
|
+ .num_chipselect = 1,
|
|
+};
|
|
+
|
|
+static struct platform_device ct6373_spi_gpio = {
|
|
+ .name = "spi_gpio",
|
|
+ .id = 1,
|
|
+ .dev = {
|
|
+ .platform_data = &ct6373_spi_gpio_data,
|
|
+ },
|
|
+};
|
|
+
|
|
+static struct platform_device * __initdata ct6373_devices[] = {
|
|
+ &ct6373_spi_gpio,
|
|
+};
|
|
+
|
|
+const struct gen_74x164_chip_platform_data ct6373_74x164_platform_data = {
|
|
+ .base = CT6373_74X164_GPIO_BASE
|
|
+};
|
|
+
|
|
+static struct spi_board_info ct6373_spi_devices[] = {
|
|
+ {
|
|
+ .modalias = "74x164",
|
|
+ .max_speed_hz = 781000,
|
|
+ .bus_num = 1,
|
|
+ .controller_data = (void *) SPI_GPIO_NO_CHIPSELECT,
|
|
+ .mode = SPI_MODE_0,
|
|
+ .platform_data = &ct6373_74x164_platform_data
|
|
+ }
|
|
+};
|
|
+
|
|
+static struct board_info __initdata board_ct6373_1 = {
|
|
+ .name = "CT6373-1",
|
|
+ .expected_cpu_id = 0x6358,
|
|
+
|
|
+ .has_uart0 = 1,
|
|
+ .has_pci = 1,
|
|
+ .has_ohci0 = 1,
|
|
+ .has_ehci0 = 1,
|
|
+
|
|
+ .has_enet1 = 1,
|
|
+ .enet1 = {
|
|
+ .has_phy = 1,
|
|
+ .phy_id = 0,
|
|
+ .force_speed_100 = 1,
|
|
+ .force_duplex_full = 1,
|
|
+ },
|
|
+
|
|
+ .leds = {
|
|
+ {
|
|
+ .name = "CT6373-1:green:power",
|
|
+ .gpio = 0,
|
|
+ .default_trigger = "default-on",
|
|
+ },
|
|
+ {
|
|
+ .name = "CT6373-1:green:usb",
|
|
+ .gpio = 3,
|
|
+ .active_low = 1,
|
|
+ },
|
|
+ {
|
|
+ .name = "CT6373-1:green:wlan",
|
|
+ .gpio = 9,
|
|
+ .active_low = 1,
|
|
+ },
|
|
+ {
|
|
+ .name = "CT6373-1:green:adsl",
|
|
+ .gpio = CT6373_74HC64_GPIO(0),
|
|
+ .active_low = 1,
|
|
+ },
|
|
+ {
|
|
+ .name = "CT6373-1:green:line",
|
|
+ .gpio = CT6373_74HC64_GPIO(1),
|
|
+ .active_low = 1,
|
|
+ },
|
|
+ {
|
|
+ .name = "CT6373-1:green:fxs1",
|
|
+ .gpio = CT6373_74HC64_GPIO(2),
|
|
+ .active_low = 1,
|
|
+ },
|
|
+ {
|
|
+ .name = "CT6373-1:green:fxs2",
|
|
+ .gpio = CT6373_74HC64_GPIO(3),
|
|
+ .active_low = 1,
|
|
+ },
|
|
+ },
|
|
+
|
|
+ .buttons = {
|
|
+ {
|
|
+ .desc = "reset",
|
|
+ .gpio = 35,
|
|
+ .active_low = 1,
|
|
+ .type = EV_KEY,
|
|
+ .code = KEY_RESTART,
|
|
+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
|
|
+ },
|
|
+ },
|
|
+
|
|
+ .devs = ct6373_devices,
|
|
+ .num_devs = ARRAY_SIZE(ct6373_devices),
|
|
+ .spis = ct6373_spi_devices,
|
|
+ .num_spis = ARRAY_SIZE(ct6373_spi_devices),
|
|
+};
|
|
+
|
|
static struct board_info __initdata board_HW553 = {
|
|
.name = "HW553",
|
|
.expected_cpu_id = 0x6358,
|
|
@@ -2595,6 +2707,7 @@ static const struct board_info __initdat
|
|
&board_nb4_ser_r2,
|
|
&board_nb4_fxc_r1,
|
|
&board_nb4_fxc_r2,
|
|
+ &board_ct6373_1,
|
|
&board_HW553,
|
|
&board_spw303v,
|
|
#endif
|