mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-23 15:32:33 +00:00
0b62fe5ed8
Rename the image and use a compatible string which indicates that only hardware revision 2 and higher is supported. It allows to use the wireless LED, as HWRev 1 uses GPIO#39 for the wireless LED and starting with HWRev 2 GPIO#35 is used for the wireless LED and GPIO#39 for IFX_GPIO_MODULE_EXTPHY_MDIO. The HWREV can be checked by connecting to the fritzbox right after power on via ftp: ftp> quote GETENV HWSubRevision Within the same HW revision 5 of the Fritz!Box 3370 different NAND flash chips are used. Usually it isn't a big deal but depending on the used NAND flash chip, the ECC calculation is done different (and incompatible of course). Boards with a Micron MT29F1G08ABADA NAND flash chip are using the NAND chip to calculate the ECC (on-die). Boards with a Hynix HY27UF081G2M NAND flash chip are doing the ECC calculation in software. Supporting both with a single DTS isn't possible. It might be possible to add a patch selecting the ECC mode dynamicaly based on the found NAND flash chip. But such a patch has no chance to get accepted upstream and most likely need to be touched with every kernel update. Instead two images are created. One for Micron NAND flash chip and one for Hynix NAND flash chip. So far no pattern is known to identify the used flash chip without opening the box. Add the power off GPIO. At least EVA version 2186 sets/keeps the GPIO as input, which will cause a reboot 30sec after power on. For boards with EVA version 2186 the installation is tricky as it has to be finished within the 30sec time frame. The EVA version can be checked by connecting to the fritzbox right after power on via ftp: ftp> quote GETENV urlader-version The ath9k eeprom/caldata is at a different and offset and stored in reverse order (from the last byte to the beginning) on the flash. Reverse the bits to bring the data into the format expected by the ath9k driver. Since the ath9k eeprom is stored in reverse order on flash, we can not use the mac address from the on flash eeprom. Get the MAC address from the tffs instead. Within the same HW revision 5 of the Fritz!Box 3370 both version of the vr9 SoC are used. During preparation of kernel 4.14 support, all devicetree source files were changed to load the vr9 v1.1 and vr9 v1.2 gphy firmware, which fixed the embedded phys for boards using the version 1.2 of the vr9 SoC. While at it, add a trigger to make use of the LAN LED. Setup the build-in switch and add a hint for LuCI two show the ports in order matching the labels on the case Add support for the second USB port and provide the volatage GPIOs. Use GPIO#21 as PCIe reset pin. The lan led is connected to GPIO#38. Name the rootfs partition ubi and remove the mtd/rootfs related kernel bootargs to use the OpenWrt autoprobing based on the partition name. Enable sysupgrade support to allow an upgrade from a running system. Since sysupgrade wasn't supported till now, drop image build code which was added to allow a sysupgrade from earlier OpenWrt versions. Build images that allow an (initial) installation via EVA bootloader. To install OpenWrt via Eva bootloader, within the first seconds after power on a ftp connection need to be established to the FRITZ!Box at 192.168.178.1 and the the following ftp commands need to be run: ftp> quote USER adam2 ftp> quote PASS adam2 ftp> binary ftp> debug ftp> passive ftp> quote SETENV linux_fs_start 0 ftp> quote MEDIA FLSH ftp> put /path/to/openwrt-lantiq-xrx200-FRITZ3370-eva-kernel.bin mtd1 ftp> put /path/to/openwrt-lantiq-xrx200-FRITZ3370-eva-filesystem.bin mtd0 Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Signed-off-by: Mathias Kresin <dev@kresin.me>
812 lines
24 KiB
Makefile
812 lines
24 KiB
Makefile
#
|
|
# Copyright (C) 2010-2016 OpenWrt.org
|
|
#
|
|
# This is free software, licensed under the GNU General Public License v2.
|
|
# See /LICENSE for more information.
|
|
#
|
|
|
|
# boards missing since devicetree update
|
|
#EASY50712 ARV3527P
|
|
|
|
KERNEL_LOADADDR = 0x80002000
|
|
KERNEL_ENTRY = 0x80002000
|
|
|
|
include $(TOPDIR)/rules.mk
|
|
include $(INCLUDE_DIR)/image.mk
|
|
|
|
ifeq ($(SUBTARGET),xway)
|
|
UBIFS_OPTS := -m 512 -e 15872 -c 1959
|
|
else
|
|
UBIFS_OPTS := -m 2048 -e 126KiB -c 4096
|
|
endif
|
|
|
|
define Build/append-avm-fakeroot
|
|
cat ./eva.dummy.squashfs >> $@
|
|
endef
|
|
|
|
define Build/dgn3500-sercom-footer
|
|
$(STAGING_DIR_HOST)/bin/dgn3500sum $@ $(1) $(2)
|
|
endef
|
|
|
|
define Build/mkbrncmdline
|
|
mkbrncmdline -i $@ -o $@.new BRN-BOOT
|
|
mv $@.new $@
|
|
endef
|
|
|
|
define Build/mkbrnimg
|
|
mkbrnimg -s $(SIGNATURE) -m $(MAGIC) -p $(CRC32_POLY) -o $@ $(IMAGE_KERNEL) $(IMAGE_ROOTFS)
|
|
endef
|
|
|
|
define Build/fullimage
|
|
mkimage -A mips -O linux -C lzma -T filesystem -a 0x00 \
|
|
-e 0x00 -n '$(VERSION_DIST) RootFS' \
|
|
-d $(IMAGE_ROOTFS) $(IMAGE_ROOTFS).new
|
|
|
|
cat $(IMAGE_KERNEL) $(IMAGE_ROOTFS).new > $@.tmp
|
|
|
|
mkimage -A mips -O linux -T multi -a 0x00 -C none \
|
|
-e 0x00 -n 'OpenWrt fullimage' \
|
|
-d $@.tmp $@
|
|
|
|
rm $(IMAGE_ROOTFS).new
|
|
rm $@.tmp
|
|
endef
|
|
|
|
# Shared device definition: applies to every defined device
|
|
define Device/Default
|
|
PROFILES = Default
|
|
KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts)
|
|
KERNEL_INITRAMFS_NAME = $$(KERNEL_NAME)-initramfs
|
|
KERNEL := kernel-bin | append-dtb | lzma | uImage lzma
|
|
KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | uImage lzma
|
|
FILESYSTEMS := squashfs
|
|
IMAGE_SIZE :=
|
|
SUPPORTED_DEVICES := $(subst _,$(comma),$(1))
|
|
IMAGES := sysupgrade.bin
|
|
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
|
|
endef
|
|
DEVICE_VARS += IMAGE_SIZE
|
|
|
|
define Device/NAND/xway
|
|
BLOCKSIZE := 16k
|
|
PAGESIZE := 512
|
|
SUBPAGESIZE := 256
|
|
FILESYSTEMS += ubifs
|
|
endef
|
|
|
|
define Device/NAND/xrx200
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
SUBPAGESIZE := 512
|
|
FILESYSTEMS += ubifs
|
|
endef
|
|
|
|
define Device/NAND
|
|
$(Device/NAND/$(SUBTARGET))
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
|
|
define Device/lantiqBrnImage
|
|
KERNEL := kernel-bin | append-dtb | mkbrncmdline | lzma-no-dict
|
|
IMAGES := factory.bin
|
|
IMAGE/factory.bin := mkbrnimg | check-size $$$$(IMAGE_SIZE)
|
|
endef
|
|
DEVICE_VARS += SIGNATURE MAGIC CRC32_POLY
|
|
|
|
define Device/lantiqFullImage
|
|
KERNEL := kernel-bin | append-dtb | lzma | uImage lzma | pad-offset 4 0
|
|
IMAGES := sysupgrade.bin fullimage.bin
|
|
IMAGE/fullimage.bin := fullimage | check-size $$$$(IMAGE_SIZE)
|
|
endef
|
|
|
|
define Device/AVM
|
|
KERNEL := kernel-bin | append-dtb | lzma | eva-image
|
|
KERNEL_INITRAMFS := $$(KERNEL)
|
|
IMAGE/sysupgrade.bin := append-kernel | pad-to 64k | append-avm-fakeroot | \
|
|
append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
|
|
endef
|
|
|
|
ifeq ($(SUBTARGET),ase)
|
|
|
|
define Device/allnet_all0333cj
|
|
IMAGE_SIZE := 3700k
|
|
DEVICE_DTS := ALL0333CJ
|
|
DEVICE_TITLE := Allnet ALL0333CJ
|
|
DEVICE_PACKAGES := kmod-ltq-adsl-ase kmod-ltq-adsl-ase-mei \
|
|
kmod-ltq-adsl-ase-fw-b kmod-ltq-atm-ase \
|
|
ltq-adsl-app ppp-mod-pppoe
|
|
endef
|
|
TARGET_DEVICES += allnet_all0333cj
|
|
|
|
define Device/netgear_dgn1000b
|
|
IMAGE_SIZE := 6000k
|
|
DEVICE_DTS := DGN1000B
|
|
DEVICE_TITLE := Netgear DGN1000B
|
|
DEVICE_PACKAGES := kmod-ltq-adsl-ase kmod-ltq-adsl-ase-mei \
|
|
kmod-ltq-adsl-ase-fw-b kmod-ltq-atm-ase \
|
|
ltq-adsl-app ppp-mod-pppoe
|
|
SUPPORTED_DEVICES += DGN1000B
|
|
endef
|
|
TARGET_DEVICES += netgear_dgn1000b
|
|
|
|
endif
|
|
|
|
ifeq ($(SUBTARGET),xway_legacy)
|
|
|
|
define Device/arcadyan_arv4520pw
|
|
IMAGE_SIZE := 3648k
|
|
DEVICE_DTS := ARV4520PW
|
|
DEVICE_TITLE := Easybox 800, WAV-281 - ARV4520PW
|
|
DEVICE_PACKAGES := kmod-usb-dwc2 kmod-usb-ledtrig-usbport \
|
|
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
|
|
kmod-ltq-adsl-danube-fw-b kmod-ltq-atm-danube \
|
|
ltq-adsl-app ppp-mod-pppoa \
|
|
kmod-rt61-pci wpad-mini
|
|
SUPPORTED_DEVICES += ARV4520PW
|
|
endef
|
|
TARGET_DEVICES += arcadyan_arv4520pw
|
|
|
|
define Device/arcadyan_arv4525pw
|
|
IMAGE_SIZE := 3776k
|
|
DEVICE_DTS := ARV4525PW
|
|
DEVICE_TITLE := Speedport W502V Typ A - ARV4525PW
|
|
DEVICE_PACKAGES := kmod-ath5k wpad-mini \
|
|
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
|
|
kmod-ltq-adsl-danube-fw-b kmod-ltq-atm-danube \
|
|
ltq-adsl-app ppp-mod-pppoa -swconfig
|
|
SUPPORTED_DEVICES += ARV4525PW
|
|
endef
|
|
TARGET_DEVICES += arcadyan_arv4525pw
|
|
|
|
define Device/arcadyan_arv452cqw
|
|
IMAGE_SIZE := 3776k
|
|
DEVICE_DTS := ARV452CQW
|
|
DEVICE_TITLE := Easybox 801 - ARV452CQW
|
|
DEVICE_PACKAGES := kmod-usb-dwc2 kmod-usb-ledtrig-usbport \
|
|
kmod-ath5k wpad-mini \
|
|
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
|
|
kmod-ltq-adsl-danube-fw-b kmod-ltq-atm-danube \
|
|
ltq-adsl-app ppp-mod-pppoa
|
|
SUPPORTED_DEVICES += ARV452CQW
|
|
endef
|
|
TARGET_DEVICES += arcadyan_arv452cqw
|
|
|
|
define Device/arcadyan_arv4518pwr01
|
|
IMAGE_SIZE := 3776k
|
|
DEVICE_DTS := ARV4518PWR01
|
|
DEVICE_TITLE := ARV4518PWR01
|
|
DEVICE_PACKAGES := kmod-usb-dwc2 kmod-usb-ledtrig-usbport \
|
|
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
|
|
kmod-ltq-adsl-danube-fw-a kmod-ltq-atm-danube \
|
|
ltq-adsl-app ppp-mod-pppoa \
|
|
kmod-ath5k wpad-mini
|
|
SUPPORTED_DEVICES += ARV4518PWR01
|
|
endef
|
|
TARGET_DEVICES += arcadyan_arv4518pwr01
|
|
|
|
define Device/arcadyan_arv4518pwr01a
|
|
IMAGE_SIZE := 3776k
|
|
DEVICE_DTS := ARV4518PWR01A
|
|
DEVICE_TITLE := ARV4518PWR01A
|
|
DEVICE_PACKAGES := kmod-usb-dwc2 kmod-usb-ledtrig-usbport \
|
|
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
|
|
kmod-ltq-adsl-danube-fw-a kmod-ltq-atm-danube \
|
|
ltq-adsl-app ppp-mod-pppoa \
|
|
kmod-ath5k wpad-mini
|
|
SUPPORTED_DEVICES += ARV4518PWR01A
|
|
endef
|
|
TARGET_DEVICES += arcadyan_arv4518pwr01a
|
|
|
|
endif
|
|
|
|
ifeq ($(SUBTARGET),xway)
|
|
|
|
# Danube
|
|
|
|
define Device/bt_homehub-v2b
|
|
$(Device/NAND)
|
|
BOARD_NAME := BTHOMEHUBV2B
|
|
DEVICE_DTS := BTHOMEHUBV2B
|
|
DEVICE_TITLE := BT Home Hub 2B
|
|
DEVICE_PACKAGES := kmod-usb-dwc2 \
|
|
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
|
|
kmod-ltq-adsl-danube-fw-a kmod-ltq-atm-danube \
|
|
kmod-ltq-deu-danube \
|
|
ltq-adsl-app ppp-mod-pppoa \
|
|
kmod-ath9k kmod-owl-loader wpad-mini
|
|
SUPPORTED_DEVICES += BTHOMEHUBV2B
|
|
endef
|
|
TARGET_DEVICES += bt_homehub-v2b
|
|
|
|
define Device/lantiq_easy50712
|
|
DEVICE_DTS := EASY50712
|
|
IMAGE_SIZE := 3776k
|
|
DEVICE_TITLE := Lantiq Danube - EASY50712
|
|
endef
|
|
TARGET_DEVICES += lantiq_easy50712
|
|
|
|
define Device/audiocodes_mp-252
|
|
IMAGE_SIZE := 14848k
|
|
DEVICE_DTS := ACMP252
|
|
DEVICE_TITLE := AudioCodes MediaPack MP-252
|
|
DEVICE_PACKAGES := kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
|
|
kmod-ltq-adsl-danube-fw-a kmod-ltq-atm-danube \
|
|
kmod-ltq-tapi kmod-ltq-vmmc \
|
|
kmod-usb-ledtrig-usbport kmod-usb-dwc2 \
|
|
kmod-rt2800-pci \
|
|
ltq-adsl-app ppp-mod-pppoa \
|
|
wpad-mini
|
|
SUPPORTED_DEVICES += ACMP252
|
|
endef
|
|
TARGET_DEVICES += audiocodes_mp-252
|
|
|
|
define Device/arcadyan_arv4510pw
|
|
IMAGE_SIZE := 15616k
|
|
DEVICE_DTS := ARV4510PW
|
|
DEVICE_TITLE := Wippies, Elisa - ARV4510PW
|
|
DEVICE_PACKAGES := kmod-usb-ledtrig-usbport kmod-usb2-pci kmod-usb-uhci \
|
|
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
|
|
kmod-ltq-adsl-danube-fw-a kmod-ltq-atm-danube \
|
|
ltq-adsl-app ppp-mod-pppoa \
|
|
kmod-ltq-tapi kmod-ltq-vmmc \
|
|
kmod-rt2800-pci kmod-ath5k wpad-mini
|
|
SUPPORTED_DEVICES += ARV4510PW
|
|
endef
|
|
TARGET_DEVICES += arcadyan_arv4510pw
|
|
|
|
define Device/arcadyan_arv7525pw
|
|
IMAGE_SIZE := 3776k
|
|
DEVICE_DTS := ARV4510PW
|
|
DEVICE_TITLE := Speedport W303V Typ A - ARV7525PW
|
|
DEVICE_PACKAGES := kmod-rt2800-pci wpad-mini \
|
|
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
|
|
kmod-ltq-adsl-danube-fw-b kmod-ltq-atm-danube \
|
|
ltq-adsl-app ppp-mod-pppoa -swconfig
|
|
SUPPORTED_DEVICES += ARV4510PW
|
|
endef
|
|
TARGET_DEVICES += arcadyan_arv7525pw
|
|
|
|
define Device/arcadyan_arv4519pw
|
|
IMAGE_SIZE := 3776k
|
|
DEVICE_DTS := ARV4519PW
|
|
DEVICE_TITLE := Vodafone, Pirelli - ARV4519PW
|
|
DEVICE_PACKAGES := kmod-usb-dwc2 kmod-usb-ledtrig-usbport \
|
|
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
|
|
kmod-ltq-adsl-danube-fw-a kmod-ltq-atm-danube \
|
|
ltq-adsl-app ppp-mod-pppoa
|
|
SUPPORTED_DEVICES += ARV4519PW
|
|
endef
|
|
TARGET_DEVICES += arcadyan_arv4519pw
|
|
|
|
define Device/arcadyan_arv7506pw11
|
|
IMAGE_SIZE := 7808k
|
|
DEVICE_DTS := ARV7506PW11
|
|
DEVICE_TITLE := Alice/O2 IAD 4421 - ARV7506PW11
|
|
DEVICE_PACKAGES := kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
|
|
kmod-ltq-adsl-danube-fw-b kmod-ltq-atm-danube \
|
|
ltq-adsl-app ppp-mod-pppoa \
|
|
kmod-rt2800-pci wpad-mini
|
|
SUPPORTED_DEVICES += ARV7506PW11
|
|
endef
|
|
TARGET_DEVICES += arcadyan_arv7506pw11
|
|
|
|
define Device/arcadyan_arv7510pw22
|
|
IMAGE_SIZE := 31232k
|
|
DEVICE_DTS := ARV7510PW22
|
|
DEVICE_TITLE := Astoria - ARV7510PW22
|
|
DEVICE_PACKAGES := kmod-usb-dwc2 kmod-usb-ledtrig-usbport \
|
|
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
|
|
kmod-ltq-adsl-danube-fw-a kmod-ltq-atm-danube \
|
|
ltq-adsl-app ppp-mod-pppoa \
|
|
kmod-ltq-tapi kmod-ltq-vmmc \
|
|
kmod-rt2800-pci wpad-mini \
|
|
kmod-usb-uhci kmod-usb2 kmod-usb2-pci
|
|
SUPPORTED_DEVICES += ARV7510PW22
|
|
endef
|
|
TARGET_DEVICES += arcadyan_arv7510pw22
|
|
|
|
define Device/arcadyan_arv7518pw
|
|
IMAGE_SIZE := 7872k
|
|
DEVICE_DTS := ARV7518PW
|
|
DEVICE_TITLE := Astoria - ARV7518PW
|
|
DEVICE_PACKAGES := kmod-usb-dwc2 kmod-usb-ledtrig-usbport \
|
|
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
|
|
kmod-ltq-adsl-danube-fw-a kmod-ltq-atm-danube \
|
|
ltq-adsl-app ppp-mod-pppoa \
|
|
kmod-ath9k kmod-owl-loader wpad-mini
|
|
SUPPORTED_DEVICES += ARV7518PW
|
|
endef
|
|
TARGET_DEVICES += arcadyan_arv7518pw
|
|
|
|
define Device/arcadyan_arv7519pw
|
|
IMAGE_SIZE := 15488k
|
|
DEVICE_DTS := ARV7519PW
|
|
DEVICE_TITLE := Astoria - ARV7519PW
|
|
DEVICE_PACKAGES := kmod-usb-dwc2 \
|
|
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
|
|
kmod-ltq-adsl-danube-fw-a kmod-ltq-atm-danube \
|
|
ltq-adsl-app ppp-mod-pppoa \
|
|
kmod-rt2800-pci wpad-mini
|
|
SUPPORTED_DEVICES += ARV7519PW
|
|
endef
|
|
TARGET_DEVICES += arcadyan_arv7519pw
|
|
|
|
define Device/arcadyan_arv752dpw
|
|
IMAGE_SIZE := 7872k
|
|
DEVICE_DTS := ARV752DPW
|
|
DEVICE_TITLE := Easybox 802 - ARV752DPW
|
|
DEVICE_PACKAGES := kmod-usb-dwc2 kmod-usb-ledtrig-usbport \
|
|
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
|
|
kmod-ltq-adsl-danube-fw-b kmod-ltq-atm-danube \
|
|
ltq-adsl-app ppp-mod-pppoa \
|
|
kmod-ltq-tapi kmod-ltq-vmmc \
|
|
kmod-rt2800-pci wpad-mini
|
|
SUPPORTED_DEVICES += ARV752DPW
|
|
endef
|
|
TARGET_DEVICES += arcadyan_arv752dpw
|
|
|
|
define Device/arcadyan_arv752dpw22
|
|
IMAGE_SIZE := 7616k
|
|
DEVICE_DTS := ARV752DPW22
|
|
DEVICE_TITLE := Easybox 803 - ARV752DPW22
|
|
DEVICE_PACKAGES := kmod-usb2-pci kmod-usb-uhci kmod-usb-dwc2 kmod-usb-ledtrig-usbport \
|
|
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
|
|
kmod-ltq-adsl-danube-fw-b kmod-ltq-atm-danube \
|
|
ltq-adsl-app ppp-mod-pppoa \
|
|
kmod-ltq-tapi kmod-ltq-vmmc \
|
|
kmod-rt2800-pci wpad-mini
|
|
SUPPORTED_DEVICES += ARV752DPW22
|
|
endef
|
|
TARGET_DEVICES += arcadyan_arv752dpw22
|
|
|
|
define Device/arcadyan_arv8539pw22
|
|
IMAGE_SIZE := 7616k
|
|
DEVICE_DTS := ARV8539PW22
|
|
DEVICE_TITLE := Speedport W504V Typ A - ARV8539PW22
|
|
DEVICE_PACKAGES := kmod-usb-dwc2 \
|
|
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
|
|
kmod-ltq-adsl-danube-fw-b kmod-ltq-atm-danube \
|
|
ltq-adsl-app ppp-mod-pppoa \
|
|
kmod-ath9k kmod-owl-loader wpad-mini
|
|
SUPPORTED_DEVICES += ARV8539PW22
|
|
endef
|
|
TARGET_DEVICES += arcadyan_arv8539pw22
|
|
|
|
define Device/siemens_gigaset-sx76x
|
|
IMAGE_SIZE := 7680k
|
|
DEVICE_DTS := GIGASX76X
|
|
DEVICE_TITLE := Gigaset sx76x
|
|
DEVICE_PACKAGES := kmod-usb-dwc2 \
|
|
kmod-ltq-adsl-danube-mei kmod-ltq-adsl-danube \
|
|
kmod-ltq-adsl-danube-fw-b kmod-ltq-atm-danube \
|
|
ltq-adsl-app ppp-mod-pppoe \
|
|
kmod-ath5k wpad-mini
|
|
SUPPORTED_DEVICES += GIGASX76X
|
|
endef
|
|
TARGET_DEVICES += siemens_gigaset-sx76x
|
|
|
|
|
|
# AR9
|
|
|
|
define Device/bt_homehub-v3a
|
|
$(Device/NAND)
|
|
BOARD_NAME := BTHOMEHUBV3A
|
|
DEVICE_DTS := BTHOMEHUBV3A
|
|
DEVICE_TITLE := BT Home Hub 3A
|
|
DEVICE_PACKAGES := kmod-usb-dwc2 \
|
|
kmod-ltq-adsl-ar9-mei kmod-ltq-adsl-ar9 \
|
|
kmod-ltq-adsl-ar9-fw-a kmod-ltq-atm-ar9 \
|
|
kmod-ltq-deu-ar9 \
|
|
ltq-adsl-app ppp-mod-pppoa \
|
|
kmod-ath9k kmod-owl-loader wpad-mini \
|
|
uboot-envtools
|
|
SUPPORTED_DEVICES += BTHOMEHUBV3A
|
|
endef
|
|
TARGET_DEVICES += bt_homehub-v3a
|
|
|
|
DGN3500_KERNEL_OFFSET_HEX=0x50000
|
|
DGN3500_KERNEL_OFFSET_DEC=327680
|
|
define Device/netgear_dgn3500
|
|
DEVICE_DTS := DGN3500
|
|
IMAGE_SIZE := 16000k
|
|
IMAGES := \
|
|
sysupgrade-na.bin sysupgrade.bin \
|
|
factory-na.img factory.img
|
|
IMAGE/sysupgrade-na.bin := \
|
|
append-kernel | append-rootfs | dgn3500-sercom-footer 0x0 "NA" | \
|
|
pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
|
|
IMAGE/sysupgrade.bin := \
|
|
append-kernel | append-rootfs | dgn3500-sercom-footer 0x0 "WW" | \
|
|
pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
|
|
IMAGE/factory-na.img := \
|
|
pad-extra $(DGN3500_KERNEL_OFFSET_DEC) | append-kernel | append-rootfs | \
|
|
dgn3500-sercom-footer $(DGN3500_KERNEL_OFFSET_HEX) "NA" | pad-rootfs | \
|
|
check-size 16320k | pad-to 16384k
|
|
IMAGE/factory.img := \
|
|
pad-extra $(DGN3500_KERNEL_OFFSET_DEC) | append-kernel | append-rootfs | \
|
|
dgn3500-sercom-footer $(DGN3500_KERNEL_OFFSET_HEX) "WW" | pad-rootfs | \
|
|
check-size 16320k | pad-to 16384k
|
|
DEVICE_TITLE := Netgear DGN3500
|
|
DEVICE_PACKAGES := kmod-usb-dwc2 kmod-usb-ledtrig-usbport \
|
|
kmod-ath9k kmod-owl-loader wpad-mini \
|
|
kmod-ltq-adsl-ar9-mei kmod-ltq-adsl-ar9 \
|
|
kmod-ltq-adsl-ar9-fw-a kmod-ltq-atm-ar9 \
|
|
ltq-adsl-app ppp-mod-pppoa \
|
|
kmod-ltq-deu-ar9
|
|
SUPPORTED_DEVICES += DGN3500
|
|
endef
|
|
TARGET_DEVICES += netgear_dgn3500
|
|
|
|
define Device/netgear_dgn3500b
|
|
DEVICE_DTS := DGN3500B
|
|
IMAGE_SIZE := 16000k
|
|
IMAGES += factory.img
|
|
IMAGE/sysupgrade.bin := \
|
|
append-kernel | append-rootfs | dgn3500-sercom-footer 0x0 "DE" | \
|
|
pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
|
|
IMAGE/factory.img := \
|
|
pad-extra $(DGN3500_KERNEL_OFFSET_DEC) | append-kernel | append-rootfs | \
|
|
dgn3500-sercom-footer $(DGN3500_KERNEL_OFFSET_HEX) "DE" | pad-rootfs | \
|
|
check-size 16320k | pad-to 16384k
|
|
DEVICE_TITLE := Netgear DGN3500B
|
|
DEVICE_PACKAGES := kmod-usb-dwc2 kmod-usb-ledtrig-usbport \
|
|
kmod-ath9k kmod-owl-loader wpad-mini \
|
|
kmod-ltq-adsl-ar9-mei kmod-ltq-adsl-ar9 \
|
|
kmod-ltq-adsl-ar9-fw-b kmod-ltq-atm-ar9 \
|
|
ltq-adsl-app ppp-mod-pppoa \
|
|
kmod-ltq-deu-ar9
|
|
SUPPORTED_DEVICES += DGN3500B
|
|
endef
|
|
TARGET_DEVICES += netgear_dgn3500b
|
|
|
|
define Device/buffalo_wbmr-hp-g300h-a
|
|
IMAGE_SIZE := 31488k
|
|
DEVICE_DTS := WBMR
|
|
DEVICE_TITLE := Buffalo WBMR-HP-G300H (A) - WBMR
|
|
DEVICE_PACKAGES := kmod-usb-dwc2 kmod-usb-ledtrig-usbport \
|
|
kmod-ltq-adsl-ar9-mei kmod-ltq-adsl-ar9 \
|
|
kmod-ltq-adsl-ar9-fw-a kmod-ltq-atm-ar9 \
|
|
ltq-adsl-app ppp-mod-pppoa \
|
|
kmod-ath9k kmod-owl-loader wpad-mini
|
|
SUPPORTED_DEVICES := WBMR buffalo,wbmr-hp-g300h
|
|
endef
|
|
TARGET_DEVICES += buffalo_wbmr-hp-g300h-a
|
|
|
|
define Device/buffalo_wbmr-hp-g300h-b
|
|
IMAGE_SIZE := 31488k
|
|
DEVICE_DTS := WBMR
|
|
DEVICE_TITLE := Buffalo WBMR-HP-G300H (B) - WBMR
|
|
DEVICE_PACKAGES := kmod-usb-dwc2 kmod-usb-ledtrig-usbport \
|
|
kmod-ltq-adsl-ar9-mei kmod-ltq-adsl-ar9 \
|
|
kmod-ltq-adsl-ar9-fw-b kmod-ltq-atm-ar9 \
|
|
ltq-adsl-app ppp-mod-pppoa \
|
|
kmod-ath9k kmod-owl-loader wpad-mini
|
|
SUPPORTED_DEVICES := WBMR buffalo,wbmr-hp-g300h
|
|
endef
|
|
TARGET_DEVICES += buffalo_wbmr-hp-g300h-b
|
|
|
|
define Device/avm_fritz7320
|
|
$(Device/AVM)
|
|
DEVICE_DTS := FRITZ7320
|
|
IMAGE_SIZE := 15744k
|
|
DEVICE_TITLE := 1&1 HomeServer - FRITZ7320
|
|
DEVICE_PACKAGES := kmod-ath9k kmod-owl-loader wpad-mini \
|
|
kmod-ltq-adsl-ar9-mei kmod-ltq-adsl-ar9 \
|
|
kmod-ltq-adsl-ar9-fw-b kmod-ltq-atm-ar9 \
|
|
ltq-adsl-app ppp-mod-pppoa \
|
|
kmod-ltq-deu-ar9 kmod-usb-dwc2 -swconfig
|
|
SUPPORTED_DEVICES += FRITZ7320
|
|
endef
|
|
TARGET_DEVICES += avm_fritz7320
|
|
|
|
define Device/zte_h201l
|
|
IMAGE_SIZE := 7808k
|
|
DEVICE_DTS := H201L
|
|
DEVICE_TITLE := ZTE H201L - H201L
|
|
DEVICE_PACKAGES := kmod-ath9k-htc wpad-mini \
|
|
kmod-ltq-adsl-ar9-mei kmod-ltq-adsl-ar9 \
|
|
kmod-ltq-adsl-ar9-fw-b kmod-ltq-atm-ar9 \
|
|
ltq-adsl-app ppp-mod-pppoe \
|
|
kmod-ltq-deu-ar9 kmod-usb-dwc2 kmod-usb-ledtrig-usbport \
|
|
kmod-ltq-tapi kmod-ltq-vmmc
|
|
SUPPORTED_DEVICES += H201L
|
|
endef
|
|
TARGET_DEVICES += zte_h201l
|
|
|
|
define Device/zyxel_p-2601hn
|
|
IMAGE_SIZE := 15616k
|
|
DEVICE_DTS := P2601HNFX
|
|
DEVICE_TITLE := ZyXEL P-2601HN-Fx
|
|
DEVICE_PACKAGES := kmod-rt2800-usb wpad-mini \
|
|
kmod-ltq-adsl-ar9-mei kmod-ltq-adsl-ar9 \
|
|
kmod-ltq-adsl-ar9-fw-b kmod-ltq-atm-ar9 \
|
|
ltq-adsl-app ppp-mod-pppoe \
|
|
kmod-ltq-deu-ar9 kmod-usb-dwc2
|
|
SUPPORTED_DEVICES += P2601HNFX
|
|
endef
|
|
TARGET_DEVICES += zyxel_p-2601hn
|
|
|
|
|
|
endif
|
|
|
|
|
|
ifeq ($(SUBTARGET),xrx200)
|
|
|
|
# VR9
|
|
|
|
define Device/zyxel_p-2812hnu-f1
|
|
$(Device/NAND)
|
|
BOARD_NAME := P2812HNUF1
|
|
DEVICE_DTS := P2812HNUF1
|
|
DEVICE_TITLE := ZyXEL P-2812HNU-F1
|
|
DEVICE_PACKAGES := kmod-rt2800-pci wpad-mini kmod-usb-dwc2 kmod-usb-ledtrig-usbport
|
|
SUPPORTED_DEVICES += P2812HNUF1
|
|
endef
|
|
TARGET_DEVICES += zyxel_p-2812hnu-f1
|
|
|
|
define Device/zyxel_p-2812hnu-f3
|
|
$(Device/NAND)
|
|
BOARD_NAME := P2812HNUF3
|
|
DEVICE_DTS := P2812HNUF3
|
|
DEVICE_TITLE := ZyXEL P-2812HNU-F3
|
|
DEVICE_PACKAGES := kmod-rt2800-pci wpad-mini kmod-usb-dwc2
|
|
SUPPORTED_DEVICES += P2812HNUF3
|
|
endef
|
|
TARGET_DEVICES += zyxel_p-2812hnu-f3
|
|
|
|
define Device/arcadyan_arv7519rw22
|
|
IMAGE_SIZE := 31232k
|
|
DEVICE_DTS := ARV7519RW22
|
|
DEVICE_TITLE := Livebox Astoria ARV7519RW22
|
|
DEVICE_PACKAGES := kmod-usb-dwc2
|
|
SUPPORTED_DEVICES += ARV7519RW22
|
|
endef
|
|
TARGET_DEVICES += arcadyan_arv7519rw22
|
|
|
|
define Device/alphanetworks_asl56026
|
|
DEVICE_DTS := ASL56026
|
|
IMAGE_SIZE := 7488k
|
|
DEVICE_TITLE := BT OpenReach - ECI VDSL Modem V-2FUb/I
|
|
endef
|
|
TARGET_DEVICES += alphanetworks_asl56026
|
|
|
|
define Device/bt_homehub-v5a
|
|
$(Device/NAND)
|
|
BOARD_NAME := BTHOMEHUBV5A
|
|
DEVICE_DTS := BTHOMEHUBV5A
|
|
DEVICE_TITLE := BT Home Hub 5A
|
|
DEVICE_PACKAGES := kmod-ath9k kmod-owl-loader \
|
|
kmod-ath10k ath10k-firmware-qca988x wpad-mini kmod-usb-dwc2
|
|
SUPPORTED_DEVICES += BTHOMEHUBV5A
|
|
endef
|
|
TARGET_DEVICES += bt_homehub-v5a
|
|
|
|
define Device/netgear_dm200
|
|
DEVICE_DTS := DM200
|
|
IMAGES := sysupgrade.bin factory.img
|
|
IMAGE/sysupgrade.bin := append-kernel | \
|
|
pad-offset 64k 64 | append-uImage-fakehdr filesystem | \
|
|
pad-offset 64k 64 | append-uImage-fakehdr filesystem | \
|
|
append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
|
|
IMAGE/factory.img := $$(IMAGE/sysupgrade.bin) | netgear-dni
|
|
IMAGE_SIZE := 7872k
|
|
DEVICE_TITLE := Netgear DM200
|
|
NETGEAR_BOARD_ID := DM200
|
|
NETGEAR_HW_ID := 29765233+8+0+64+0+0
|
|
endef
|
|
DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_HW_ID
|
|
TARGET_DEVICES += netgear_dm200
|
|
|
|
define Device/lantiq_easy80920-nand
|
|
$(Device/lantiqFullImage)
|
|
DEVICE_DTS := EASY80920NAND
|
|
IMAGE_SIZE := 64512k
|
|
DEVICE_TITLE := Lantiq VR9 - EASY80920NAND
|
|
DEVICE_PACKAGES := kmod-ath9k kmod-owl-loader wpad-mini kmod-usb-dwc2 kmod-usb-ledtrig-usbport
|
|
endef
|
|
TARGET_DEVICES += lantiq_easy80920-nand
|
|
|
|
define Device/lantiq_easy80920-nor
|
|
DEVICE_DTS := EASY80920NOR
|
|
IMAGE_SIZE := 7936k
|
|
DEVICE_TITLE := Lantiq VR9 - EASY80920NOR
|
|
DEVICE_PACKAGES := kmod-ath9k kmod-owl-loader wpad-mini kmod-usb-dwc2 kmod-usb-ledtrig-usbport
|
|
endef
|
|
TARGET_DEVICES += lantiq_easy80920-nor
|
|
|
|
define Device/avm_fritz3370
|
|
$(Device/AVM)
|
|
$(Device/NAND)
|
|
DEVICE_DTS := FRITZ3370
|
|
DEVICE_TITLE := AVM Fritz!Box WLan 3370 Rev. 2
|
|
KERNEL_SIZE := 4096k
|
|
UBINIZE_OPTS := -E 5
|
|
IMAGES += eva-kernel.bin eva-filesystem.bin
|
|
IMAGE/eva-kernel.bin := append-kernel
|
|
IMAGE/eva-filesystem.bin := append-ubi
|
|
DEVICE_PACKAGES := kmod-ath9k wpad-mini kmod-usb-dwc2 fritz-tffs
|
|
endef
|
|
|
|
define Device/avm_fritz3370-rev2-hynix
|
|
$(Device/avm_fritz3370)
|
|
DEVICE_DTS := FRITZ3370-REV2-HYNIX
|
|
DEVICE_TITLE := AVM Fritz!Box WLan 3370 Rev. 2 (Hynix NAND)
|
|
endef
|
|
TARGET_DEVICES += avm_fritz3370-rev2-hynix
|
|
|
|
define Device/avm_fritz3370-rev2-micron
|
|
$(Device/avm_fritz3370)
|
|
DEVICE_DTS := FRITZ3370-REV2-MICRON
|
|
DEVICE_TITLE := AVM Fritz!Box WLan 3370 Rev. 2 (Micron NAND)
|
|
endef
|
|
TARGET_DEVICES += avm_fritz3370-rev2-micron
|
|
|
|
define Device/avm_fritz7360sl
|
|
$(Device/AVM)
|
|
IMAGE_SIZE := 15744k
|
|
DEVICE_DTS := FRITZ7360SL
|
|
DEVICE_TITLE := 1&1 HomeServer - FRITZ7360SL
|
|
DEVICE_PACKAGES := kmod-ath9k kmod-owl-loader wpad-mini kmod-usb-dwc2
|
|
SUPPORTED_DEVICES += FRITZ7360SL
|
|
endef
|
|
TARGET_DEVICES += avm_fritz7360sl
|
|
|
|
define Device/arcadyan_vg3503j
|
|
IMAGE_SIZE := 8000k
|
|
DEVICE_DTS := VG3503J
|
|
DEVICE_TITLE := BT OpenReach - ECI VDSL Modem V-2FUb/R
|
|
SUPPORTED_DEVICES += VG3503J
|
|
endef
|
|
TARGET_DEVICES += arcadyan_vg3503j
|
|
|
|
include tp-link.mk
|
|
|
|
define Device/buffalo_wbmr-300hpd
|
|
IMAGE_SIZE := 15616k
|
|
DEVICE_DTS := WBMR300
|
|
DEVICE_TITLE := Buffalo WBMR-300HPD
|
|
DEVICE_PACKAGES := kmod-mt7603 wpad-mini kmod-usb-dwc2
|
|
SUPPORTED_DEVICES += WBMR300
|
|
endef
|
|
TARGET_DEVICES += buffalo_wbmr-300hpd
|
|
|
|
define Device/arcadyan_vgv7510kw22-nor
|
|
IMAGE_SIZE := 15232k
|
|
DEVICE_DTS := VGV7510KW22NOR
|
|
DEVICE_TITLE := o2 Box 6431 / Arcadyan VGV7510KW22 (NOR)
|
|
DEVICE_PACKAGES := kmod-rt2800-pci wpad-mini kmod-usb-dwc2 kmod-ltq-tapi kmod-ltq-vmmc
|
|
SUPPORTED_DEVICES += VGV7510KW22NOR
|
|
endef
|
|
TARGET_DEVICES += arcadyan_vgv7510kw22-nor
|
|
|
|
define Device/arcadyan_vgv7510kw22-brn
|
|
$(Device/lantiqBrnImage)
|
|
IMAGE_SIZE := 7168k
|
|
DEVICE_DTS := VGV7510KW22BRN
|
|
SIGNATURE := BRNDA6431
|
|
MAGIC := 0x12345678
|
|
CRC32_POLY := 0x04c11db7
|
|
DEVICE_TITLE := o2 Box 6431 / Arcadyan VGV7510KW22 (BRN)
|
|
DEVICE_PACKAGES := kmod-rt2800-pci wpad-mini kmod-usb-dwc2 kmod-ltq-tapi kmod-ltq-vmmc
|
|
SUPPORTED_DEVICES += VGV7510KW22BRN
|
|
endef
|
|
TARGET_DEVICES += arcadyan_vgv7510kw22-brn
|
|
|
|
define Device/arcadyan_vgv7519-nor
|
|
IMAGE_SIZE := 15360k
|
|
DEVICE_DTS := VGV7519NOR
|
|
DEVICE_TITLE := Experiabox 8 VGV7519
|
|
DEVICE_PACKAGES := kmod-rt2800-pci wpad-mini kmod-usb-dwc2 kmod-ltq-tapi kmod-ltq-vmmc
|
|
SUPPORTED_DEVICES += VGV7519NOR
|
|
endef
|
|
TARGET_DEVICES += arcadyan_vgv7519-nor
|
|
|
|
define Device/arcadyan_vgv7519-brn
|
|
$(Device/lantiqBrnImage)
|
|
IMAGE_SIZE := 7168k
|
|
DEVICE_DTS := VGV7519BRN
|
|
SIGNATURE := 5D00008000
|
|
MAGIC := 0x12345678
|
|
CRC32_POLY := 0x2083b8ed
|
|
DEVICE_TITLE := Experiabox 8 VGV7519 (BRN)
|
|
DEVICE_PACKAGES := kmod-rt2800-pci wpad-mini kmod-usb-dwc2 kmod-ltq-tapi kmod-ltq-vmmc
|
|
SUPPORTED_DEVICES += VGV7519BRN
|
|
endef
|
|
TARGET_DEVICES += arcadyan_vgv7519-brn
|
|
|
|
endif
|
|
|
|
|
|
ifeq ($(SUBTARGET),falcon)
|
|
|
|
define Device/lantiq_easy98000-nor
|
|
IMAGE_SIZE := 3904k
|
|
DEVICE_DTS := EASY98000NOR
|
|
DEVICE_TITLE := EASY98000 - Lantiq Falcon Eval Board NOR
|
|
DEVICE_PACKAGES := kmod-dm9000 kmod-i2c-lantiq kmod-eeprom-at24
|
|
endef
|
|
TARGET_DEVICES += lantiq_easy98000-nor
|
|
|
|
define Device/lantiq_easy98000-nand
|
|
IMAGE_SIZE := 3904k
|
|
DEVICE_DTS := EASY98000NAND
|
|
DEVICE_TITLE := EASY98000 - Lantiq Falcon Eval Board NAND
|
|
DEVICE_PACKAGES := kmod-dm9000 kmod-i2c-lantiq kmod-eeprom-at24
|
|
endef
|
|
TARGET_DEVICES += lantiq_easy98000-nand
|
|
|
|
define Device/lantiq_easy98000-sflash
|
|
IMAGE_SIZE := 7424k
|
|
DEVICE_DTS := EASY98000SFLASH
|
|
DEVICE_TITLE := EASY98000 - Lantiq Falcon Eval Board SFLASH
|
|
DEVICE_PACKAGES := kmod-dm9000 kmod-i2c-lantiq kmod-eeprom-at24
|
|
endef
|
|
TARGET_DEVICES += lantiq_easy98000-sflash
|
|
|
|
define Device/lantiq_falcon-mdu
|
|
IMAGE_SIZE := 7424k
|
|
DEVICE_DTS := FALCON-MDU
|
|
DEVICE_TITLE := MDU - Lantiq Falcon / VINAXdp MDU Board
|
|
endef
|
|
TARGET_DEVICES += lantiq_falcon-mdu
|
|
|
|
define Device/lantiq_easy88388
|
|
IMAGE_SIZE := 7424k
|
|
DEVICE_DTS := EASY88388
|
|
DEVICE_TITLE := EASY88388 - Lantiq Falcon FTTDP8 Reference Board
|
|
endef
|
|
TARGET_DEVICES += lantiq_easy88388
|
|
|
|
define Device/lantiq_easy88444
|
|
IMAGE_SIZE := 7424k
|
|
DEVICE_DTS := EASY88444
|
|
DEVICE_TITLE := EASY88444 - Lantiq Falcon FTTdp G.FAST Reference Board
|
|
endef
|
|
TARGET_DEVICES += lantiq_easy88444
|
|
|
|
define Device/lantiq_falcon-sfp
|
|
IMAGE_SIZE := 7424k
|
|
DEVICE_DTS := FALCON-SFP
|
|
DEVICE_TITLE := SFP - Lantiq Falcon SFP Stick
|
|
endef
|
|
TARGET_DEVICES += lantiq_falcon-sfp
|
|
|
|
define Device/lantiq_easy98035synce
|
|
IMAGE_SIZE := 7424k
|
|
DEVICE_DTS := EASY98035SYNCE
|
|
DEVICE_TITLE := EASY98035SYNCE - Lantiq Falcon SFP Stick with Synchronous Ethernet
|
|
endef
|
|
TARGET_DEVICES += lantiq_easy98035synce
|
|
|
|
define Device/lantiq_easy98035synce1588
|
|
IMAGE_SIZE := 7424k
|
|
DEVICE_DTS := EASY98035SYNCE1588
|
|
DEVICE_TITLE := EASY98035SYNCE1588 - Lantiq Falcon SFP Stick with SyncE and IEEE1588
|
|
endef
|
|
TARGET_DEVICES += lantiq_easy98035synce1588
|
|
|
|
define Device/lantiq_easy98020
|
|
IMAGE_SIZE := 7424k
|
|
DEVICE_DTS := EASY98020
|
|
DEVICE_TITLE := EASY98020 - Lantiq Falcon SFU Reference Board
|
|
endef
|
|
TARGET_DEVICES += lantiq_easy98020
|
|
|
|
define Device/lantiq_easy98020-v18
|
|
IMAGE_SIZE := 7424k
|
|
DEVICE_DTS := EASY98020V18
|
|
DEVICE_TITLE := EASY98020V18 - Lantiq Falcon SFU Reference Board V1.8
|
|
endef
|
|
TARGET_DEVICES += lantiq_easy98020-v18
|
|
|
|
define Device/lantiq_easy98021
|
|
IMAGE_SIZE := 7424k
|
|
DEVICE_DTS := EASY98021
|
|
DEVICE_TITLE := EASY98021 - Lantiq Falcon HGU Reference Board
|
|
endef
|
|
TARGET_DEVICES += lantiq_easy98021
|
|
|
|
endif
|
|
|
|
$(eval $(call BuildImage))
|