Thomas Aldrian f755d81999 ramips: add support for Wavlink WL-WN578A2 ... This commit adds support for the Wavlink WL-WN578A2 dual-band wall-plug wireless router. This device is also sold under the name SilverCrest SWV 733 A2. Device Specifications: - CPU: MediaTek MT7628AN (580MHz) - Flash: 8MB - RAM: 64MB - Bootloader: U-Boot - Ethernet: 2x 10/100 Mbps - 2.4 GHz: 802.11b/g/n SoC - 5 GHz: 802.11a/n/ac MT7610E - Antennas: internal - 4 green LEDs: WPS/Power, LAN, WAN, wifi-low, wifi-med, wifi-high - Buttons: Reset, WPS - Sliding mode switch: AP, repeater, client - Small sliding power switch Flashing instructions: U-Boot launches TFTP client if WPS button is pressed during power-on. Configure as follows: - Server IP: 192.168.10.100 - Filename (rename sysupgrade file to this): firmware.bin Flashing should not take more than a minute, device will reboot automatically. Signed-off-by: Thomas Aldrian <dev.aldrian@gmail.com>		2021-05-28 01:12:21 +02:00
..
base-files	ramips: add support for Wavlink WL-WN578A2	2021-05-28 01:12:21 +02:00
config-5.4	treewide: switch the timer frequency to 100 Hz	2021-04-21 10:31:10 +01:00
config-5.10	treewide: switch the timer frequency to 100 Hz	2021-04-21 10:31:10 +01:00
target.mk	treewide: use wpad-basic-wolfssl as default	2020-08-20 14:19:39 +02:00