mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-21 06:33:41 +00:00
2f2ea7b44c
This patch bumps the 4.4 kernel from .28 to .30 and refreshes the patches. Compile-tested on ar71xx, x86/64, ramips/mt7621, brcm47xx and kirkwood. Run-tested on ar71xx & ramips/mt7621, brcm47xx and kirkwood (last two confirmed by P. Wassi). Signed-off-by: Stijn Segers <francesco.borromini@inventati.org>
290 lines
9.3 KiB
Diff
290 lines
9.3 KiB
Diff
From c2d0a12b5cfa61e43494483f5d1ee466b4998830 Mon Sep 17 00:00:00 2001
|
|
From: Liu Gang <Gang.Liu@nxp.com>
|
|
Date: Thu, 14 Jan 2016 19:48:09 +0800
|
|
Subject: [PATCH 42/70] drivers/gpio: Port gpio driver to support layerscape
|
|
platform
|
|
|
|
Layerscape has the same ip block/controller as
|
|
GPIO on powerpc platform(MPC8XXX).
|
|
|
|
So use portable i/o accessors, as in_be32/out_be32
|
|
accessors are Power architecture specific whereas
|
|
ioread32/iowrite32 and ioread32be/iowrite32be are
|
|
available in other architectures.
|
|
|
|
Layerscape GPIO controller's registers may be big
|
|
or little endian, so the code needs to get the
|
|
endian property from DTB, then make additional
|
|
functions to fit right register read/write
|
|
operations.
|
|
|
|
Currently the code can support ls2080a GPIO with
|
|
little endian registers. And it can also work well
|
|
on other layerscape platform with big endian GPIO
|
|
registers.
|
|
|
|
Signed-off-by: Liu Gang <Gang.Liu@nxp.com>
|
|
---
|
|
drivers/gpio/Kconfig | 7 ++--
|
|
drivers/gpio/gpio-mpc8xxx.c | 87 +++++++++++++++++++++++++++++++------------
|
|
2 files changed, 68 insertions(+), 26 deletions(-)
|
|
|
|
--- a/drivers/gpio/Kconfig
|
|
+++ b/drivers/gpio/Kconfig
|
|
@@ -282,12 +282,13 @@ config GPIO_MPC5200
|
|
depends on PPC_MPC52xx
|
|
|
|
config GPIO_MPC8XXX
|
|
- bool "MPC512x/MPC8xxx GPIO support"
|
|
+ bool "MPC512x/MPC8xxx/QorIQ GPIO support"
|
|
depends on PPC_MPC512x || PPC_MPC831x || PPC_MPC834x || PPC_MPC837x || \
|
|
- FSL_SOC_BOOKE || PPC_86xx
|
|
+ FSL_SOC_BOOKE || PPC_86xx || ARCH_LAYERSCAPE || ARM || \
|
|
+ COMPILE_TEST
|
|
help
|
|
Say Y here if you're going to use hardware that connects to the
|
|
- MPC512x/831x/834x/837x/8572/8610 GPIOs.
|
|
+ MPC512x/831x/834x/837x/8572/8610/QorIQ GPIOs.
|
|
|
|
config GPIO_MVEBU
|
|
def_bool y
|
|
--- a/drivers/gpio/gpio-mpc8xxx.c
|
|
+++ b/drivers/gpio/gpio-mpc8xxx.c
|
|
@@ -1,5 +1,5 @@
|
|
/*
|
|
- * GPIOs on MPC512x/8349/8572/8610 and compatible
|
|
+ * GPIOs on MPC512x/8349/8572/8610/QorIQ and compatible
|
|
*
|
|
* Copyright (C) 2008 Peter Korsgaard <jacmet@sunsite.dk>
|
|
*
|
|
@@ -19,6 +19,7 @@
|
|
#include <linux/gpio.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/irq.h>
|
|
+#include <linux/irqdomain.h>
|
|
|
|
#define MPC8XXX_GPIO_PINS 32
|
|
|
|
@@ -44,6 +45,27 @@ struct mpc8xxx_gpio_chip {
|
|
const void *of_dev_id_data;
|
|
};
|
|
|
|
+static bool gpio_little_endian;
|
|
+static inline u32 gpio_in32(void __iomem *addr)
|
|
+{
|
|
+ u32 val;
|
|
+
|
|
+ if (gpio_little_endian)
|
|
+ val = ioread32(addr);
|
|
+ else
|
|
+ val = ioread32be(addr);
|
|
+
|
|
+ return val;
|
|
+}
|
|
+
|
|
+static inline void gpio_out32(u32 val, void __iomem *addr)
|
|
+{
|
|
+ if (gpio_little_endian)
|
|
+ iowrite32(val, addr);
|
|
+ else
|
|
+ iowrite32be(val, addr);
|
|
+}
|
|
+
|
|
static inline u32 mpc8xxx_gpio2mask(unsigned int gpio)
|
|
{
|
|
return 1u << (MPC8XXX_GPIO_PINS - 1 - gpio);
|
|
@@ -59,9 +81,17 @@ static void mpc8xxx_gpio_save_regs(struc
|
|
{
|
|
struct mpc8xxx_gpio_chip *mpc8xxx_gc = to_mpc8xxx_gpio_chip(mm);
|
|
|
|
- mpc8xxx_gc->data = in_be32(mm->regs + GPIO_DAT);
|
|
+ mpc8xxx_gc->data = gpio_in32(mm->regs + GPIO_DAT);
|
|
}
|
|
|
|
+/* Generic set and clear bits accessor ports */
|
|
+#define bgpio_setbits32(_addr, _v) \
|
|
+ gpio_out32(gpio_in32(_addr) | (_v), (_addr))
|
|
+#define bgpio_clrbits32(_addr, _v) \
|
|
+ gpio_out32(gpio_in32(_addr) & ~(_v), (_addr))
|
|
+#define bgpio_clrsetbits32(addr, clear, set) \
|
|
+ gpio_out32((gpio_in32(addr) & ~(clear)) | (set), (addr))
|
|
+
|
|
/* Workaround GPIO 1 errata on MPC8572/MPC8536. The status of GPIOs
|
|
* defined as output cannot be determined by reading GPDAT register,
|
|
* so we use shadow data register instead. The status of input pins
|
|
@@ -74,9 +104,9 @@ static int mpc8572_gpio_get(struct gpio_
|
|
struct mpc8xxx_gpio_chip *mpc8xxx_gc = to_mpc8xxx_gpio_chip(mm);
|
|
u32 out_mask, out_shadow;
|
|
|
|
- out_mask = in_be32(mm->regs + GPIO_DIR);
|
|
+ out_mask = gpio_in32(mm->regs + GPIO_DIR);
|
|
|
|
- val = in_be32(mm->regs + GPIO_DAT) & ~out_mask;
|
|
+ val = gpio_in32(mm->regs + GPIO_DAT) & ~out_mask;
|
|
out_shadow = mpc8xxx_gc->data & out_mask;
|
|
|
|
return (val | out_shadow) & mpc8xxx_gpio2mask(gpio);
|
|
@@ -86,7 +116,7 @@ static int mpc8xxx_gpio_get(struct gpio_
|
|
{
|
|
struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc);
|
|
|
|
- return in_be32(mm->regs + GPIO_DAT) & mpc8xxx_gpio2mask(gpio);
|
|
+ return gpio_in32(mm->regs + GPIO_DAT) & mpc8xxx_gpio2mask(gpio);
|
|
}
|
|
|
|
static void mpc8xxx_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
|
|
@@ -102,7 +132,7 @@ static void mpc8xxx_gpio_set(struct gpio
|
|
else
|
|
mpc8xxx_gc->data &= ~mpc8xxx_gpio2mask(gpio);
|
|
|
|
- out_be32(mm->regs + GPIO_DAT, mpc8xxx_gc->data);
|
|
+ gpio_out32(mpc8xxx_gc->data, mm->regs + GPIO_DAT);
|
|
|
|
raw_spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
|
|
}
|
|
@@ -128,7 +158,7 @@ static void mpc8xxx_gpio_set_multiple(st
|
|
}
|
|
}
|
|
|
|
- out_be32(mm->regs + GPIO_DAT, mpc8xxx_gc->data);
|
|
+ gpio_out32(mpc8xxx_gc->data, mm->regs + GPIO_DAT);
|
|
|
|
raw_spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
|
|
}
|
|
@@ -141,7 +171,7 @@ static int mpc8xxx_gpio_dir_in(struct gp
|
|
|
|
raw_spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
|
|
|
|
- clrbits32(mm->regs + GPIO_DIR, mpc8xxx_gpio2mask(gpio));
|
|
+ bgpio_clrbits32(mm->regs + GPIO_DIR, mpc8xxx_gpio2mask(gpio));
|
|
|
|
raw_spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
|
|
|
|
@@ -158,7 +188,7 @@ static int mpc8xxx_gpio_dir_out(struct g
|
|
|
|
raw_spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
|
|
|
|
- setbits32(mm->regs + GPIO_DIR, mpc8xxx_gpio2mask(gpio));
|
|
+ bgpio_setbits32(mm->regs + GPIO_DIR, mpc8xxx_gpio2mask(gpio));
|
|
|
|
raw_spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
|
|
|
|
@@ -201,7 +231,8 @@ static void mpc8xxx_gpio_irq_cascade(str
|
|
struct of_mm_gpio_chip *mm = &mpc8xxx_gc->mm_gc;
|
|
unsigned int mask;
|
|
|
|
- mask = in_be32(mm->regs + GPIO_IER) & in_be32(mm->regs + GPIO_IMR);
|
|
+ mask = gpio_in32(mm->regs + GPIO_IER)
|
|
+ & gpio_in32(mm->regs + GPIO_IMR);
|
|
if (mask)
|
|
generic_handle_irq(irq_linear_revmap(mpc8xxx_gc->irq,
|
|
32 - ffs(mask)));
|
|
@@ -217,7 +248,8 @@ static void mpc8xxx_irq_unmask(struct ir
|
|
|
|
raw_spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
|
|
|
|
- setbits32(mm->regs + GPIO_IMR, mpc8xxx_gpio2mask(irqd_to_hwirq(d)));
|
|
+ bgpio_setbits32(mm->regs + GPIO_IMR,
|
|
+ mpc8xxx_gpio2mask(irqd_to_hwirq(d)));
|
|
|
|
raw_spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
|
|
}
|
|
@@ -230,7 +262,8 @@ static void mpc8xxx_irq_mask(struct irq_
|
|
|
|
raw_spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
|
|
|
|
- clrbits32(mm->regs + GPIO_IMR, mpc8xxx_gpio2mask(irqd_to_hwirq(d)));
|
|
+ bgpio_clrbits32(mm->regs + GPIO_IMR,
|
|
+ mpc8xxx_gpio2mask(irqd_to_hwirq(d)));
|
|
|
|
raw_spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
|
|
}
|
|
@@ -240,7 +273,7 @@ static void mpc8xxx_irq_ack(struct irq_d
|
|
struct mpc8xxx_gpio_chip *mpc8xxx_gc = irq_data_get_irq_chip_data(d);
|
|
struct of_mm_gpio_chip *mm = &mpc8xxx_gc->mm_gc;
|
|
|
|
- out_be32(mm->regs + GPIO_IER, mpc8xxx_gpio2mask(irqd_to_hwirq(d)));
|
|
+ gpio_out32(mpc8xxx_gpio2mask(irqd_to_hwirq(d)), mm->regs + GPIO_IER);
|
|
}
|
|
|
|
static int mpc8xxx_irq_set_type(struct irq_data *d, unsigned int flow_type)
|
|
@@ -252,15 +285,15 @@ static int mpc8xxx_irq_set_type(struct i
|
|
switch (flow_type) {
|
|
case IRQ_TYPE_EDGE_FALLING:
|
|
raw_spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
|
|
- setbits32(mm->regs + GPIO_ICR,
|
|
- mpc8xxx_gpio2mask(irqd_to_hwirq(d)));
|
|
+ bgpio_setbits32(mm->regs + GPIO_ICR,
|
|
+ mpc8xxx_gpio2mask(irqd_to_hwirq(d)));
|
|
raw_spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
|
|
break;
|
|
|
|
case IRQ_TYPE_EDGE_BOTH:
|
|
raw_spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
|
|
- clrbits32(mm->regs + GPIO_ICR,
|
|
- mpc8xxx_gpio2mask(irqd_to_hwirq(d)));
|
|
+ bgpio_clrbits32(mm->regs + GPIO_ICR,
|
|
+ mpc8xxx_gpio2mask(irqd_to_hwirq(d)));
|
|
raw_spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
|
|
break;
|
|
|
|
@@ -292,20 +325,20 @@ static int mpc512x_irq_set_type(struct i
|
|
case IRQ_TYPE_EDGE_FALLING:
|
|
case IRQ_TYPE_LEVEL_LOW:
|
|
raw_spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
|
|
- clrsetbits_be32(reg, 3 << shift, 2 << shift);
|
|
+ bgpio_clrsetbits32(reg, 3 << shift, 2 << shift);
|
|
raw_spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
|
|
break;
|
|
|
|
case IRQ_TYPE_EDGE_RISING:
|
|
case IRQ_TYPE_LEVEL_HIGH:
|
|
raw_spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
|
|
- clrsetbits_be32(reg, 3 << shift, 1 << shift);
|
|
+ bgpio_clrsetbits32(reg, 3 << shift, 1 << shift);
|
|
raw_spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
|
|
break;
|
|
|
|
case IRQ_TYPE_EDGE_BOTH:
|
|
raw_spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
|
|
- clrbits32(reg, 3 << shift);
|
|
+ bgpio_clrbits32(reg, 3 << shift);
|
|
raw_spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
|
|
break;
|
|
|
|
@@ -398,6 +431,14 @@ static int mpc8xxx_probe(struct platform
|
|
mm_gc = &mpc8xxx_gc->mm_gc;
|
|
gc = &mm_gc->gc;
|
|
|
|
+ if (of_property_read_bool(np, "little-endian")) {
|
|
+ gpio_little_endian = true;
|
|
+ dev_dbg(&pdev->dev, "GPIO REGISTERS are LITTLE endian\n");
|
|
+ } else {
|
|
+ gpio_little_endian = false;
|
|
+ dev_dbg(&pdev->dev, "GPIO REGISTERS are BIG endian\n");
|
|
+ }
|
|
+
|
|
mm_gc->save_regs = mpc8xxx_gpio_save_regs;
|
|
gc->ngpio = MPC8XXX_GPIO_PINS;
|
|
gc->direction_input = mpc8xxx_gpio_dir_in;
|
|
@@ -422,7 +463,7 @@ static int mpc8xxx_probe(struct platform
|
|
return ret;
|
|
|
|
mpc8xxx_gc->irqn = irq_of_parse_and_map(np, 0);
|
|
- if (mpc8xxx_gc->irqn == NO_IRQ)
|
|
+ if (mpc8xxx_gc->irqn == 0)
|
|
return 0;
|
|
|
|
mpc8xxx_gc->irq = irq_domain_add_linear(np, MPC8XXX_GPIO_PINS,
|
|
@@ -435,8 +476,8 @@ static int mpc8xxx_probe(struct platform
|
|
mpc8xxx_gc->of_dev_id_data = id->data;
|
|
|
|
/* ack and mask all irqs */
|
|
- out_be32(mm_gc->regs + GPIO_IER, 0xffffffff);
|
|
- out_be32(mm_gc->regs + GPIO_IMR, 0);
|
|
+ gpio_out32(0xffffffff, mm_gc->regs + GPIO_IER);
|
|
+ gpio_out32(0, mm_gc->regs + GPIO_IMR);
|
|
|
|
irq_set_chained_handler_and_data(mpc8xxx_gc->irqn,
|
|
mpc8xxx_gpio_irq_cascade, mpc8xxx_gc);
|