openwrt/target/linux/brcm63xx/patches-3.6/530-board_963281T_TEF.patch
Jonas Gorski 746b4cec06 bcm63xx: Enable LED pin support for ath9k pci fixup.
Some boards need specifying LED pin in order to get it working.
For example, in board HW556 (Huawei HG556a) "led_pin" must be "2".
By default led_pin is "0", so dsl_274xb_rev_f is changed to "-1".

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 34321
2012-11-24 14:19:16 +00:00

137 lines
2.5 KiB
Diff

--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -206,6 +206,125 @@ static struct board_info __initdata boar
},
};
+static struct board_info __initdata board_963281T_TEF = {
+ .name = "963281T_TEF",
+ .expected_cpu_id = 0x6328,
+
+ .has_uart0 = 1,
+ .has_pci = 1,
+ .has_ohci0 = 1,
+ .has_ehci0 = 1,
+ .has_enetsw = 1,
+
+ .enetsw = {
+ .used_ports = {
+ [0] = {
+ .used = 1,
+ .phy_id = 1,
+ .name = "Port 1",
+ },
+ [1] = {
+ .used = 1,
+ .phy_id = 2,
+ .name = "Port 2",
+ },
+ [2] = {
+ .used = 1,
+ .phy_id = 3,
+ .name = "Port 3",
+ },
+ [3] = {
+ .used = 1,
+ .phy_id = 4,
+ .name = "Port 4",
+ },
+ },
+ },
+
+ .leds = {
+ {
+ .name = "963281T_TEF:green:power",
+ .gpio = 4,
+ .active_low = 1,
+ .default_trigger = "default-on",
+ },
+ {
+ .name = "963281T_TEF:red:power",
+ .gpio = 8,
+ .active_low = 1,
+ },
+ {
+ .name = "963281T_TEF:green:inet",
+ .gpio = 11,
+ .active_low = 1,
+ },
+ {
+ .name = "963281T_TEF:red:inet",
+ .gpio = 2,
+ .active_low = 1,
+ },
+ {
+ .name = "963281T_TEF:green:ppp",
+ .gpio = 3,
+ .active_low = 1,
+ },
+ {
+ .name = "963281T_TEF:red:ppp",
+ .gpio = 5,
+ .active_low = 1,
+ },
+ {
+ .name = "963281T_TEF:green:3g",
+ .gpio = 6,
+ .active_low = 1,
+ },
+ {
+ .name = "963281T_TEF:red:3g",
+ .gpio = 7,
+ .active_low = 1,
+ },
+ {
+ .name = "963281T_TEF:green:wlan",
+ .gpio = 9,
+ .active_low = 1,
+ },
+ {
+ .name = "963281T_TEF:red:wlan",
+ .gpio = 10,
+ .active_low = 1,
+ },
+ {
+ .name = "963281T_TEF:green:eth",
+ .gpio = 31,
+ .active_low = 1,
+ },
+ {
+ .name = "963281T_TEF:red:eth",
+ .gpio = 20,
+ .active_low = 1,
+ },
+ },
+
+ .buttons = {
+ {
+ .desc = "reset",
+ .gpio = 23,
+ .active_low = 1,
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
+ },
+ {
+ .desc = "wlan",
+ .gpio = 24,
+ .active_low = 1,
+ .type = EV_KEY,
+ .code = KEY_WLAN,
+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
+ },
+ },
+};
+
static struct board_info __initdata board_dsl_274xb_f1 = {
.name = "AW4339U",
.expected_cpu_id = 0x6328,
@@ -2874,6 +2993,7 @@ static const struct board_info __initdat
#ifdef CONFIG_BCM63XX_CPU_6328
&board_96328avng,
&board_963281TAN,
+ &board_963281T_TEF,
&board_dsl_274xb_f1,
#endif
#ifdef CONFIG_BCM63XX_CPU_6338