ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-29 10:08:59 +00:00
Code Issues Actions 6 Packages Projects Releases Wiki Activity
7455457893
openwrt/target/linux/ipq40xx/files/arch/arm/boot/dts
History
Mark Mentovai 7f54bf6fe2
ipq40xx: add MikroTik wAP ac (RBwAPG-5HacD2HnD) support 
The MikroTik wAP ac (RBwAPG-5HacD2HnD) is a dual-band dual-radio
802.11ac wireless access point with integrated antenna and two Ethernet
ports in a weatherproof enclosure. See
https://mikrotik.com/product/wap_ac for more information.

Important: this is the new ipq40xx-based wAP ac, not the older
ath79-based wAP ac (RBwAPG-5HacT2HnD), already supported in OpenWrt.

Specifications:
 - SoC: Qualcomm Atheros IPQ4018
 - CPU: 4x ARM Cortex A7
 - RAM: 128MB
 - Storage: 16MB NOR flash
 - Wireless
    - 2.4GHz: Built-in IPQ4018 (SoC) 802.11b/g/n 2x2:2, 2.5 dBi antennae
    - 5GHz: Built-in IPQ4018 (SoC) 802.11a/n/ac 2x2:2, 2.5 dBi antennae
 - Ethernet: Built-in IPQ4018 (SoC, QCA8075), 2x 1000/100/10Mb/s ports,
   one with 802.3af/at PoE in

Installation:
Boot the initramfs image via TFTP, then flash the sysupgrade image using
sysupgrade. Details at https://openwrt.org/toh/mikrotik/common.

Notes:
This preserves the MAC addresses of the physical Ethernet ports:
 - eth0 corresponds to the physical port labeled ETH1 and has the base
   MAC address. This port can be used to power the device.
 - eth1 corresponds to the physical port labeled ETH2 and has a MAC
   address one greater than the base.

MAC addresses are set from /lib/preinit/05_set_iface_mac_ipq40xx.sh
rather than /etc/board.d/02_network so that they are in effect for
preinit. This should likely be done for other MikroTik devices and
possibly other non-MikroTik devices as well.

As this device has 2 physical ports, they are each connected to their
respective PHYs, allowing the link status to be visible to software.
Since they are not marked on the case with any role (such as LAN or
WAN), both are bridged to the lan network by default, although this can
easily be changed if needed.

Signed-off-by: Mark Mentovai <mark@mentovai.com>
2022-07-18 01:45:47 +02:00
..
qcom-ipq4018-a42.dts ipq40xx: DTS style updates for OpenMesh devices 2020-11-23 13:44:47 +01:00
qcom-ipq4018-ap120c-ac.dts ipq40xx: utilize nvmem-cells for macs & (pre-)calibration data 2022-01-15 17:26:55 +01:00
qcom-ipq4018-cap-ac.dts ipq40xx: mikrotik: make RouterBoot partition writeable 2022-06-29 12:34:49 +02:00
qcom-ipq4018-cs-w3-wd1200g-eup.dts ipq40xx: nvmem cells for EZVIZ CS-W3-WD1200G EUP 2021-12-04 00:36:47 +01:00
qcom-ipq4018-dap-2610.dts ipq40xx: remove model name from LED labels 2020-10-07 01:31:37 +02:00
qcom-ipq4018-ea6350v3.dts ipq40xx: utilize nvmem-cells for macs & (pre-)calibration data 2022-01-15 17:26:55 +01:00
qcom-ipq4018-eap1300.dts ipq40xx: utilize nvmem-cells for macs & (pre-)calibration data 2022-01-15 17:26:55 +01:00
qcom-ipq4018-ecw5211.dts ipq40xx: utilize nvmem-cells for macs & (pre-)calibration data 2022-01-15 17:26:55 +01:00
qcom-ipq4018-emd1.dts ipq40xx: remove model name from LED labels 2020-10-07 01:31:37 +02:00
qcom-ipq4018-emr3500.dts ipq40xx: remove model name from LED labels 2020-10-07 01:31:37 +02:00
qcom-ipq4018-ens620ext.dts ipq40xx: remove model name from LED labels 2020-10-07 01:31:37 +02:00
qcom-ipq4018-ex61x0v2.dtsi ipq40xx: utilize nvmem on Netgear EX61X0 v2 Series 2021-11-28 01:13:08 +01:00
qcom-ipq4018-ex6100v2.dts ipq40xx: tidy up dts-v1 statements 2020-09-25 21:10:41 +02:00
qcom-ipq4018-ex6150v2.dts ipq40xx: tidy up dts-v1 statements 2020-09-25 21:10:41 +02:00
qcom-ipq4018-fritzbox-4040.dts ipq40xx: dts: convert PHY GPIO bindings 2020-12-23 16:36:08 +01:00
qcom-ipq4018-gl-ap1300.dts ipq40xx: utilize nvmem-cells for macs & (pre-)calibration data 2022-01-15 17:26:55 +01:00
qcom-ipq4018-hap-ac2.dts ipq40xx: mikrotik: make RouterBoot partition writeable 2022-06-29 12:34:49 +02:00
qcom-ipq4018-jalapeno.dts ipq40xx: consolidate DTS files 2020-06-23 21:02:26 +02:00
qcom-ipq4018-jalapeno.dtsi ipq40xx: utilize nvmem-cells for macs & (pre-)calibration data 2022-01-15 17:26:55 +01:00
qcom-ipq4018-magic-2-wifi-next.dts ipq40xx: add support for devolo Magic 2 WiFi next 2020-12-22 20:55:40 +01:00
qcom-ipq4018-meshpoint-one.dts ipq40xx: remove model name from LED labels 2020-10-07 01:31:37 +02:00
qcom-ipq4018-nbg6617.dts ipq40xx: increase SPI frequency for Zyxel NBG6617 2021-07-11 01:38:52 +02:00
qcom-ipq4018-pa1200.dts ipq40xx: add support for Plasma Cloud PA1200 2020-12-22 19:11:50 +01:00
qcom-ipq4018-rt-ac58u.dts ipq40xx: add support for ASUS RT-ACRH17/RT-AC42U 2022-01-15 17:21:01 +01:00
qcom-ipq4018-rutx10.dts ipq40xx: Add support for Teltonika RUTX10 2021-11-28 18:39:01 +01:00
qcom-ipq4018-rutx.dtsi ipq40xx: utilize nvmem-cells for macs & (pre-)calibration data 2022-01-15 17:26:55 +01:00
qcom-ipq4018-sxtsq-5-ac.dts ipq40xx: mikrotik: make RouterBoot partition writeable 2022-06-29 12:34:49 +02:00
qcom-ipq4018-wac510.dts ipq40xx: WAC510: device-tree overhauling 2022-03-26 02:02:44 +01:00
qcom-ipq4018-wap-ac.dts ipq40xx: add MikroTik wAP ac (RBwAPG-5HacD2HnD) support 2022-07-18 01:45:47 +02:00
qcom-ipq4018-whw01-v1.dts ipq40xx: add support for Linksys WHW01 v1 2022-06-05 21:19:32 +02:00
qcom-ipq4018-wre6606.dts ipq40xx: remove model name from LED labels 2020-10-07 01:31:37 +02:00
qcom-ipq4018-wrtq-329acn.dts ipq40xx: utilize nvmem-cells for macs & (pre-)calibration data 2022-01-15 17:26:55 +01:00
qcom-ipq4019-a62.dts ipq40xx: DTS style updates for OpenMesh devices 2020-11-23 13:44:47 +01:00
qcom-ipq4019-cm520-79f.dts ipq40xx: utilize nvmem-cells for macs & (pre-)calibration data 2022-01-15 17:26:55 +01:00
qcom-ipq4019-e2600ac-c1.dts ipq40xx: update E2600AC c1/c2 board 2022-03-25 18:14:13 +01:00
qcom-ipq4019-e2600ac-c2.dts ipq40xx: update E2600AC c1/c2 board 2022-03-25 18:14:13 +01:00
qcom-ipq4019-e2600ac.dtsi ipq40xx: update E2600AC c1/c2 board 2022-03-25 18:14:13 +01:00
qcom-ipq4019-ea8300.dts ipq40xx: remove model name from LED labels 2020-10-07 01:31:37 +02:00
qcom-ipq4019-eap2200.dts ipq40xx: utilize nvmem-cells for macs & (pre-)calibration data 2022-01-15 17:26:55 +01:00
qcom-ipq4019-fritzbox-7530.dts IPQ4019: AVM FRITZ!Box 7530: Remove NAND ECC restrictions from DTS 2022-05-15 16:35:00 +02:00
qcom-ipq4019-fritzrepeater-1200.dts ipq40xx: fix FRITZRepeater 1200 RGMII delay 2021-07-17 20:06:49 +02:00
qcom-ipq4019-fritzrepeater-3000.dts ipq40xx: remove model name from LED labels 2020-10-07 01:31:37 +02:00
qcom-ipq4019-gl-b2200.dts ipq40xx: document pcie wifi chip on the GL.Inet GL-B2200 2022-02-19 18:29:42 +01:00
qcom-ipq4019-habanero-dvk.dts ipq40xx: utilize nvmem-cells for macs & (pre-)calibration data 2022-01-15 17:26:55 +01:00
qcom-ipq4019-hap-ac3.dts ipq40xx: mikrotik: make RouterBoot partition writeable 2022-06-29 12:34:49 +02:00
qcom-ipq4019-lhgg-60ad.dts ipq40xx: mikrotik: make RouterBoot partition writeable 2022-06-29 12:34:49 +02:00
qcom-ipq4019-map-ac2200.dts ipq40xx: Lyra: update RGB LED-Controller node for 5.10+ 2022-05-14 11:08:45 +02:00
qcom-ipq4019-mf286d.dts ipq40xx: add support for ZTE MF286D 2022-02-05 00:44:35 +01:00
qcom-ipq4019-mr8300.dts ipq40xx: remove model name from LED labels 2020-10-07 01:31:37 +02:00
qcom-ipq4019-oap100.dts ipq40xx: utilize nvmem-cells for macs & (pre-)calibration data 2022-01-15 17:26:55 +01:00
qcom-ipq4019-orbi.dtsi ipq40xx: add support for Netgear SRR60/SRS60 and RBR50/RBS50 2021-11-01 00:56:51 +01:00
qcom-ipq4019-pa2200.dts ipq40xx: add support for Plasma Cloud PA2200 2020-12-22 19:11:50 +01:00
qcom-ipq4019-r619ac-64m.dts ipq40xx: add support for P&W R619AC (aka G-DOCK 2.0) 2021-11-14 14:28:34 +01:00
qcom-ipq4019-r619ac-128m.dts ipq40xx: add support for P&W R619AC (aka G-DOCK 2.0) 2021-11-14 14:28:34 +01:00
qcom-ipq4019-r619ac.dtsi ipq40xx: R619AC: replace space with - separator in variant string 2022-07-15 15:21:44 +02:00
qcom-ipq4019-rbr50.dts ipq40xx: add support for Netgear SRR60/SRS60 and RBR50/RBS50 2021-11-01 00:56:51 +01:00
qcom-ipq4019-rbs50.dts ipq40xx: add support for Netgear SRR60/SRS60 and RBR50/RBS50 2021-11-01 00:56:51 +01:00
qcom-ipq4019-rt-ac42u.dts ipq40xx: rename RT-AC42U WLAN/LAN LEDs 2022-01-17 20:38:43 +09:00
qcom-ipq4019-rtl30vw.dts ipq40xx: revert Cell-C RTL30VW to legacy caldata extraction 2022-05-15 16:32:25 +02:00
qcom-ipq4019-srr60.dts ipq40xx: add support for Netgear SRR60/SRS60 and RBR50/RBS50 2021-11-01 00:56:51 +01:00
qcom-ipq4019-srs60.dts ipq40xx: add support for Netgear SRR60/SRS60 and RBR50/RBS50 2021-11-01 00:56:51 +01:00
qcom-ipq4019-u4019-32m.dts ipq40xx: utilize nvmem-cells for macs & (pre-)calibration data 2022-01-15 17:26:55 +01:00
qcom-ipq4019-u4019.dtsi ipq40xx: utilize nvmem-cells for macs & (pre-)calibration data 2022-01-15 17:26:55 +01:00
qcom-ipq4019-wifi.dts ipq40xx: Add subtarget for Google WiFi (Gale) 2022-03-25 18:14:13 +01:00
qcom-ipq4019-wpj419.dts ipq40xx: fix wrong nand definition for wpj419 2022-05-01 13:40:13 +09:00
qcom-ipq4019-wtr-m2133hp.dts ipq40xx: utilize nvmem-cells for macs & (pre-)calibration data 2022-01-15 17:26:55 +01:00
qcom-ipq4019-x1pro.dts ipq40xx: add support for Telco X1 Pro 2022-03-19 20:05:00 +01:00
qcom-ipq4019-x1pro.dtsi ipq40xx: add support for Telco X1 Pro 2022-03-19 20:05:00 +01:00
qcom-ipq4019-xx8300.dtsi ipq40xx: tidy up dts-v1 statements 2020-09-25 21:10:41 +02:00
qcom-ipq4028-wpj428.dts ipq40xx: utilize nvmem-cells for macs & (pre-)calibration data 2022-01-15 17:26:55 +01:00
qcom-ipq4029-ap-303.dts ipq40xx: utilize nvmem-cells for macs & (pre-)calibration data 2022-01-15 17:26:55 +01:00
qcom-ipq4029-ap-303h.dts ipq40xx: utilize nvmem-cells for macs & (pre-)calibration data 2022-01-15 17:26:55 +01:00
qcom-ipq4029-ap-365.dts ipq40xx: add Aruba AP-365 specific BDF 2022-06-02 16:50:12 +02:00
qcom-ipq4029-aruba-glenmorangie.dtsi ipq40xx: utilize nvmem-cells for macs & (pre-)calibration data 2022-01-15 17:26:55 +01:00
qcom-ipq4029-gl-b1300.dts ipq40xx: utilize nvmem-cells for macs & (pre-)calibration data 2022-01-15 17:26:55 +01:00
qcom-ipq4029-gl-s1300.dts ipq40xx: utilize nvmem-cells for macs & (pre-)calibration data 2022-01-15 17:26:55 +01:00
qcom-ipq4029-insect-common.dtsi ipq40xx: add support for Meraki MR74 2022-06-19 12:31:02 +02:00
qcom-ipq4029-mr33.dts ipq40xx: add support for Meraki MR74 2022-06-19 12:31:02 +02:00
qcom-ipq4029-mr74.dts ipq40xx: add support for Meraki MR74 2022-06-19 12:31:02 +02:00