Jiawei Wang 9c500db896 ramips: fix used MAC addresses for Phicomm K2P ... The factory partition of the Phicomm K2P contains two MAC addresses. The lower MAC address is at offset 0xe006 and the higher one is at offset 0xe000. Use the lower MAC address as base mac-address which the switch driver increments by one for the second (wan) vlan. The MAC addresses are still inverted in contrast to the stock firmware where the lower MAC address is used for wan. But at least the use of a MAC address not intended/reserved for this particular board is fixed. Signed-off-by: Jiawei Wang <me@jwang.link>		2017-09-15 07:14:29 +02:00
..
base-files	ramips: add support for TP-Link Archer C20 v1	2017-09-13 08:07:54 +02:00
dts	ramips: fix used MAC addresses for Phicomm K2P	2017-09-15 07:14:29 +02:00
files-4.9/drivers/net/ethernet/mtk	ramips: Change ethernet driver to use napi_complete_done.	2017-09-11 17:03:54 +02:00
image	ramips: add support for TP-Link Archer C20 v1	2017-09-13 08:07:54 +02:00
mt76x8	ramips: merge mt7628/mt7688 into mt76x8	2017-08-30 17:05:10 +02:00
mt7620	ramips: drop stray kernel 4.4 configs	2017-07-27 09:17:25 +02:00
mt7621	ramips: drop stray kernel 4.4 configs	2017-07-27 09:17:25 +02:00
patches-4.9	kernel: update 4.9 to 4.9.45	2017-08-30 17:05:10 +02:00
rt288x	ramips: drop stray kernel 4.4 configs	2017-07-27 09:17:25 +02:00
rt305x	ramips: drop stray kernel 4.4 configs	2017-07-27 09:17:25 +02:00
rt3883	ramips: drop stray kernel 4.4 configs	2017-07-27 09:17:25 +02:00
Makefile	ramips: merge mt7628/mt7688 into mt76x8	2017-08-30 17:05:10 +02:00
modules.mk	ramips: fix mt76x8 dependencies	2017-09-05 08:08:36 +02:00