mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-26 17:01:14 +00:00
145 lines
5.1 KiB
ArmAsm
145 lines
5.1 KiB
ArmAsm
#include "AT91RM9200_inc.h"
|
|
|
|
/*---------------------------
|
|
ARM Core Mode and Status Bits
|
|
---------------------------*/
|
|
.section start
|
|
.text
|
|
|
|
#define ARM_MODE_USER 0x10
|
|
#define ARM_MODE_FIQ 0x11
|
|
#define ARM_MODE_IRQ 0x12
|
|
#define ARM_MODE_SVC 0x13
|
|
#define ARM_MODE_ABORT 0x17
|
|
#define ARM_MODE_UNDEF 0x1B
|
|
#define ARM_MODE_SYS 0x1F
|
|
|
|
#define I_BIT 0x80
|
|
#define F_BIT 0x40
|
|
#define T_BIT 0x20
|
|
|
|
/*----------------------------------------------------------------------------
|
|
Area Definition
|
|
----------------
|
|
Must be defined as function to put first in the code as it must be mapped
|
|
at offset 0 of the flash EBI_CSR0, ie. at address 0 before remap.
|
|
_---------------------------------------------------------------------------*/
|
|
|
|
.align 4
|
|
.globl _start
|
|
_start:
|
|
|
|
/*----------------------------------------------------------------------------
|
|
Exception vectors ( before Remap )
|
|
------------------------------------
|
|
These vectors are read at address 0.
|
|
They absolutely requires to be in relative addresssing mode in order to
|
|
guarantee a valid jump. For the moment, all are just looping (what may be
|
|
dangerous in a final system). If an exception occurs before remap, this
|
|
would result in an infinite loop.
|
|
----------------------------------------------------------------------------*/
|
|
b reset /* reset */
|
|
b undefvec /* Undefined Instruction */
|
|
b swivec /* Software Interrupt */
|
|
b pabtvec /* Prefetch Abort */
|
|
b dabtvec /* Data Abort */
|
|
b rsvdvec /* reserved */
|
|
b aicvec /* IRQ : read the AIC */
|
|
b fiqvec /* FIQ */
|
|
|
|
undefvec:
|
|
swivec:
|
|
pabtvec:
|
|
dabtvec:
|
|
rsvdvec:
|
|
aicvec:
|
|
fiqvec:
|
|
b undefvec
|
|
|
|
reset:
|
|
|
|
#define MEMEND 0x00004000
|
|
|
|
/* ----------------------------
|
|
Setup the stack for each mode
|
|
---------------------------- */
|
|
|
|
#define IRQ_STACK_SIZE 0x10
|
|
#define FIQ_STACK_SIZE 0x04
|
|
#define ABT_STACK_SIZE 0x04
|
|
#define UND_STACK_SIZE 0x04
|
|
#define SVC_STACK_SIZE 0x10
|
|
#define USER_STACK_SIZE 0x400
|
|
|
|
ldr r0,= MEMEND
|
|
|
|
/*- Set up Supervisor Mode and set Supervisor Mode Stack*/
|
|
msr CPSR_c, #ARM_MODE_SVC | I_BIT | F_BIT
|
|
mov r13, r0 /* Init stack Undef*/
|
|
sub r0, r0, #SVC_STACK_SIZE
|
|
|
|
/*- Set up Interrupt Mode and set IRQ Mode Stack*/
|
|
msr CPSR_c, #ARM_MODE_IRQ | I_BIT | F_BIT
|
|
mov r13, r0 /* Init stack IRQ*/
|
|
sub r0, r0, #IRQ_STACK_SIZE
|
|
|
|
/*- Set up Fast Interrupt Mode and set FIQ Mode Stack*/
|
|
msr CPSR_c, #ARM_MODE_FIQ | I_BIT | F_BIT
|
|
mov r13, r0 /* Init stack FIQ*/
|
|
sub r0, r0, #FIQ_STACK_SIZE
|
|
|
|
/*- Set up Abort Mode and set Abort Mode Stack*/
|
|
msr CPSR_c, #ARM_MODE_ABORT | I_BIT | F_BIT
|
|
mov r13, r0 /* Init stack Abort*/
|
|
sub r0, r0, #ABT_STACK_SIZE
|
|
|
|
/*- Set up Undefined Instruction Mode and set Undef Mode Stack*/
|
|
msr CPSR_c, #ARM_MODE_UNDEF | I_BIT | F_BIT
|
|
mov r13, r0 /* Init stack Undef*/
|
|
sub r0, r0, #UND_STACK_SIZE
|
|
|
|
/*- Set up user Mode and set System Mode Stack*/
|
|
msr CPSR_c, #ARM_MODE_SYS | I_BIT | F_BIT
|
|
bic r0, r0, #3 /* Insure word alignement */
|
|
mov sp, r0 /* Init stack System */
|
|
|
|
|
|
ldr r0, = AT91F_LowLevelInit
|
|
mov lr, pc
|
|
bx r0
|
|
|
|
/*----------------------------------------
|
|
Read/modify/write CP15 control register
|
|
----------------------------------------*/
|
|
mrc p15, 0, r0, c1, c0,0 /* read cp15 control registre (cp15 r1) in r0 */
|
|
ldr r3,= 0xC0000080 /* Reset bit :Little Endian end fast bus mode */
|
|
ldr r4,= 0xC0001000 /* Set bit :Asynchronous clock mode, Not Fast Bus, I-Cache enable */
|
|
bic r0, r0, r3
|
|
orr r0, r0, r4
|
|
mcr p15, 0, r0, c1, c0,0 /* write r0 in cp15 control registre (cp15 r1) */
|
|
|
|
/* Enable interrupts */
|
|
msr CPSR_c, #ARM_MODE_SYS | F_BIT
|
|
|
|
/*------------------------------------------------------------------------------
|
|
- Branch on C code Main function (with interworking)
|
|
----------------------------------------------------
|
|
- Branch must be performed by an interworking call as either an ARM or Thumb
|
|
- _start function must be supported. This makes the code not position-
|
|
- independent. A Branch with link would generate errors
|
|
----------------------------------------------------------------------------*/
|
|
|
|
/*- Branch to _start by interworking*/
|
|
ldr r4, = main
|
|
mov lr, pc
|
|
bx r4
|
|
|
|
/*-----------------------------------------------------------------------------
|
|
- Loop for ever
|
|
---------------
|
|
- End of application. Normally, never occur.
|
|
- Could jump on Software Reset ( B 0x0 ).
|
|
------------------------------------------------------------------------------*/
|
|
End:
|
|
b End
|